COMBI Dry Ice Grit Blasters - Blaster with Abrasive Module Brochure

The Cool Way Of CleaningCOMBI 7 SeriesDry Ice BlastersThe CRYONOMIC® COMBI 7 Series is the only dry ice blaster allowing the highest cleaning performance for every imaginable application. This blaster can be used in 3 different set-ups, each having specific applications. 1. One-hose applications • Focalised and medium scaled cleaning applications • High performance cleaning with low air consumption • Light and easy manipulation2. Two-hose applications • Fast cleaning for large scale cleaning jobs • Considerable savings on dry ice consumption • Ability to clean at long distance (hose length up to 100 meters) 3. Dry ice grit blasting applications • New applications by a combination of dry ice with a minimum amount of abrasives • Using less than 10% of abrasives compared to traditional gritblastingThe machine for every jobUnique characteristics of the COMBI 7 seriesOne-hose gunMG1004CRYONOMIC® blastgunsOne-hose guns and two-hose guns• Quick-fit nozzles changed within seconds: no tools required• Nozzles can be turned in any desired position during operation• Equipped to plug-in the CRYONOMIC® gun light• Integrated safety catch: avoids undesired blast activation (legally imposed for CE)• The control cable plugs directly into the gun No more annoying dangling connectors at the gun• Ergonomic shockproof thermoplastic handle• Also available with remote control for dry ice feed rate and blast pressure 1Why ‘two-hose blasting’ if one hose would work as well?• Two-hose blasting allows to use wider nozzles and faster cleaning• Controlled low-pressure pellet transport in separate pellethose guarantees less dry ice consumption. Second airhose accelerates pellets to higher speed compared to any other single hose system• Powerful supersonic pellet acceleration leads to more efficient and faster cleaningOne-hose gun MG1004R Two-hose gun G5000Two-hose gun G5000R 11Set-up according to your applications• Most versatile equipment on the market that can be used as a one-hose blaster or as a two-hose blaster according to your application• With the right selection of the gun and hose you hook up to the machine, you are able to perform your cleaning job in optimal conditions, saving on dry ice or on compressed air• Pre-equipped for combined dry ice and abrasive blastingAdvanced and safe technology inside• Unique patented self regulating airlock system limiting wear-out and maintenance• Constant and regular dry ice flow• Soft start and start safety protocolIntuitive control panel with ON/OFF buttons• Emergency stop and ON/OFF buttons• Robust single touch control buttons for • setting dry ice feed rate displayed in kg/h • setting blast pressure with manometer • gun light activation • abrasive module selection • remote control activatorRobust and easy transportable• Two big wheels, two pivoting wheels• Foldable handle that can be used as a hose holder• Lifting eye bolts and forklift handle slot• Compact and practical nozzle and accessory boxes for transport• All components easy accessibleMG1004RMG1004ROne-hose setupThe Abrasive Module• Combines benefits of dry ice and abrasive blasting• Allows to mix a controlled quantity of abrasive granulate in the dry ice flow • Some applications are rust removal, paint stripping, removal of stubborn material and surface roughening before coating.One-hose setTwo-hose setMedium scale applications Low air consumption Focalised cleaning Large scale applications Low pellet consumption Long distance cleaningBoth one-hose and two-hose applications++++++COMBI 71RCOMBI 72ROne-hose set and two-hose setG5000RG5000RAccessories and optionsVariety of CRYONOMIC® NT- nozzles• High performance nozzles for any circumstances• Changed within second: no tools required• Models : round, flat, angled, custom made • Length : from 55 mm up to 2 m and more• Special low air flow nozzles (< 1m³/min up to 4 bar)Compact CRYONOMIC® ‘All-in-one’ nozzle and accessory boxes, contain:• Commonly used round, flat and angled nozzles• Dry ice crusher for cleaning delicate surfaces and hard to reach spots (one crusher for all nozzles)• Gun light• Empty space to store blastgun and second crusher• Optional spare parts setR: the above configurations are also available with remote control on the gunThe CRYONOMIC® gun light• Clear white light on the spot to clean• Plug-in gun light (no additional cable, no batteries)• Adjustable intensity: to avoid surface reflection • Allows fast nozzle switching: without gun light removalTwo-hose setupBoth setupsCOMBI 73R===COMBI 7COMBI 7COMBI 7Compose your CRYONOMIC® COMBI 7 blaster according to your needsCRYONOMICKleimoer 3 - B-9030 Gent - BelgiumTel: +32 9 216 76 90 - Fax: +32 9 216 76 91info@cryonomic.comwww.cryonomic.comCOMBI 7Dry Ice BlastersCRYONOMIC® COMBI 7A patented CRYONOMIC® technology has been integrated, resulting in unequalled performances with limited air consumption. This technology has following advantages:• the unique self regulating CRYONOMIC® Airlock system, limiting wear out and maintenance (no oil required/one sealer disc)• constant and regular dry ice flowWe paid special attention to safety, operator ergonomics and ease of manipulation. The unit is very economical in use and produces excellent results even in the most challenging circumstances.The CRYONOMIC® dry ice blasters all meet the new EC machine directive 2006/42/EC (incl 2006/95/EC and 2004/108/EC).CRYONOMIC® has a worldwide network. Contact your dealer for any information:Printed in Belgium – CRY-COMBI-EN-1210CRYONOMIC® is a registered trademark of ARTIMPEX N.V.Chassis • Complete stainless steel • foldable push handle and hose support• 2 big wheels, 2 pivoting wheels • lifting eyelets & forklift handling slotStandard delivered with • 5 m hose set • gun • round nozzle• 5 m power cord • manual • CE certificateDimension (LxWxH) & weight • 665 x 570 x 876 mm³ (push handle folded down), 100 kgHopper • 30 kg dry ice capacity • isolated hopper • easily removable• Advanced pneumatic hopper agitationPellet consumption • Adjustable and displayed on frontpanel: 25-100 kg• Start-up value programmable • Blasting without dry ice possibleBlast pressure • 1-10 bar with one-hose gun• 1-16 bar with two-hose gunAir consumption • One-hose: 0,5-5,5 m³/min for 1-10 bar• Two-hose: 1-13 m³/min for 1-16 barSupply pressure • 1-16 bar dried air • connection 1” BSPMains/power consumption • 220-240 V, 50-60 Hz, 650 WHardware & software features • Pre-equipped for gunlight• Pre-equipped for blasting dry ice with abrasives• Self diagnosis on start-up• Hour counter and acoustic and visual error indicationOptions • Alternative pellet rotors of 8-35 kg/h, 10-40 kg/h & 33-130 kg/h• Transformer 110 V / 50-60 Hz• Robot guns for automation projects• Blasting at 20 barTechnical informationSee our leaflet “COB-Series” for our compact one-hose blasters