Crowcon - Model I-Test - Bump Test and Calibration Manager Solution Datasheet

I-TestPortable Gas Detection Equipmentl Flexiblel Reliablel Records When lives and property are at risk and you need gas detection equipment that is totally reliable, you need Crowcon. For over 40 years Crowcon has been developing and manufacturing high quality products with a reputation for reliability and technical innovation.Crowcon provide both single gas and multigas monitors for personal monitoring and portable safety applications providing protection against a wide range of industrial gas hazards. I-Test is Crowcon’s newest solution to test and verify that your Gas-Pro is in a compliant state to carry out your daily work. Bump testing standards are getting tighter in all regions and the need for the control of the bump and calibration records is a must, the I-Test with the I-Test Manager makes this as easy as it can be. Ensuring your site is compliant I-TestBump test solutions Fliexible Mains powered, or battery back upNo computer required for bump or calibration testEntirely self-containedAbility to update Gas-Pro configurationsData managementSoftware to support the I-TestReliable I-Test can recognise cylinders that are empty or that have expiredStarts test procedure automatically when the Gas-Pro is inserted into the I-TestThe demand flow regulator coupled with the I-Test allows the automatic pull of the correct required amount and concentration of gasVerifies that the sensors are responding to a known value of gas and that filters are clear and good for useEnsures the audible and visual alarms are workingAllows full compliance No button presses requiredNo requirements to turn on and off the gasGives the user full confidence that the Gas-Pro is compliant to useAllows you to use on site, or in field No extra equipment required No fleet downtime Site compliance Configurable to site requirements Records Allows you to carry out exception reportingStores and updates all bump and calibration resultsYou can see who has and hasn’t carried out their bump test or calibrations Results can then be interrogated using the I-Test manager software Please see the back page for full technical specifications.I-Test ManagerI-Test Manager is Crowcon’s software solution for the control of your data that has been collected through the I-Test. The software platform is intuitive and can be used by multiple users giving you the ability to run the correct reports for your department. With the I-Test Manager you can do the following: Manage cylinders Field configuration Inlet configurationView data Create reports Exception reporting• Ensure gas is tracked • Ensure gas is in date • Flexibility of concentrations• Change a fleet easily • Ensure unit is up to latest standards • No down time • Flexibility of use • Ensure correct gas is being used• Data reporting in graph form • Search by date• Full site record keeping • Site compliant • Tailored reporting• Print or save certificates • Ensure everyone is following site rules • Report on missing units • Flexibility on reports www.crowcon.com UK:Tel: +44 (0) 1235 557700Fax: +44 (0) 1235 557718Email: sales@crowcon.comUS:Tel: +1 859 957 1039Toll Free: 800 527 6926Fax: +1 513 957 1044Email: salesusa@crowcon.usNL:Tel: +31 10 421 1232Fax: +31 10 421 0542Email: eu@crowcon.comSG:Tel: +65 6745 2936Fax: +65 6745 0467Email: sales@crowcon.com.sgCN:Tel: +86 (0) 10 6787 0335Fax: +86 (0) 10 6787 4879Email: saleschina@crowcon.comIN:Tel: +91 22 6708 0400Fax: +91 22 6708 0405Email: salesindia@crowcon.comCrowcon reserves the right to change the design or specification of the product without notice.Check www.crowcon.com for updates. SizeWeightInput supplyI-Test backup batteryRTC backup batteryUSB interfaceInlets/Outlets RegulatorsStorage capacity Temperature specificationsHumidity Ingress protection P08015GB Issue 1 August 2013I-Test Specification:110 x 250 x 320mm (4.3 x 9.8 x 12.6 ins)2kg (70.5oz)9-12V @ 3A200 speedy bump tests with 15 second intervals bewteen tests 5 hours in standby with no bump testBattery life approximately 500 cycles Charge time 7 hours 3 year lifeOne standard USB type A socket for USB Flash Memory stick One standard USB type B socket for connections to PC Single gas inlet (requires demand flow regulator) Purge inlet (air)Exhaust Demand flow regulator required Internal 2GB MicroSD cardOperating temperature: -10oC to +50oCStorage temperature: -25oC to +60oCCharging temperature: 0oC to +40oC0% and 95% relative humidity (non-condensing) at +40oCIP20Accessories: Cylinder holderDemand flow regulator Calibration gas