Engineering E-Book (PDF 8.133 MB)

1. Understanding and choosing an appropriate skimmer.A. Abanaki Skimmer capacity.B. Abanaki Belts.C. Wiper Blade Materials.D. Types of motors.E. Optional equipment.2. Oil Grabber Model 823. Oil Grabber Model 44. Oil Grabber Model MB (Multi-Belt)5. Tote-It Portable6. PetroXtractor – Well Oil Skimmer7. Mighty-Mini Portable8. Grease Grabber9. Oil Boss10. Oil Concentrator11. Q-Vac 10012. Mighty Disk Skimmer13. Plastic Disk SkimmerTable of ContentsUnderstanding and choosing an appropriate skimmerABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0004040-1 www.abanaki.comAbanaki skimmers remove any free floating hydrocarbon (oil, fat or grease)from aqueous liquids. This includes: kerosene, Bunker C, gasoline, dieselfuel, tramp oils, motor oils, salad oils, tuna oil, chicken fat, trichlorethylene,perchlorethylene, and many others.Wastewater Sumps• To reclaim waste oils before ejecting the water into the sewage system. The skimmerpays for itself in no time.Coolant Tanks • To remove tramp oils from coolant. Results are longer coolant life, cleaner coolant,and smooth operating machinery.Heat Treating Quench Tanks • Remove waste oils so they do not disrupt the rest of the heat treating operation.Parts Washers • Removes tramp oils from washwater allowing water to be recycled. Parking Lots - Truck Washing Stations• Recovers oil runoff from the buried API separators before the water is ejected into thesewers.CNC Machine Beds • Removes tramp oil from coolant beds..Outdoor Ponds, Lakes, even Streams • Where floating oil contamination requires removal.Food Processing Facilities • To lift or remove any type of edible oil or fat. Typical applications include a pet foodfactory where pig grease is removed from processing vats, and a tuna canning facilitywhere fish oil is removed for reprocessing.In conjunction with Filtration Equipment• Removes floating oil before filtration, preventing clogging, and prolonging the life ofthe filter.Monitoring Wells • Removes oil and fuel from underground aquifers.Understanding and choosing an appropriate skimmerABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0004040-2 www.abanaki.comINDUSTRIES WHERE ABANAKI PRODUCTS ARE OPERATED:Manufacturers of :• Food and kindred products• Textiles• Wood and paper products, including furniture and containers• Printing, publishing, and related products• Chemicals and related products• Petroleum refining and related industries• Rubber and plastics products• Leather products• Stone, clay, glass and concrete products• Primary metals (steel, copper, foundries, etc.)• Fabricated metal products• Machinery• Electrical and electronic machinery, equipment and supplies• Transportation equipment• Medical related products (optics, drugs, instruments, etc.)Other Industries include:Agriculture, Forestry, and FishingOre MiningOil and Gas ExtractionMining and Quarrying of nonmetallic mineralsConstructionRailroad TransportationCommercial Shipping FleetsLocal, Suburban and Highway TransportationMotor Freight Transportation and warehousingCar and Truck Washing U.S. Postal ServiceU.S. Corp. of EngineersElectric and Gas utilitiesSanitary and Sewage treatmentWater utilitiesDry cleaning plants, industrial launders, and garment or uniform servicesAutomotive repair, services and garagesUnderstanding and choosing an appropriate skimmerABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0004040-3 www.abanaki.com EXPERIENCE:• Abanaki has been the leader in belt oil skimming technology for over thirty years. Unlikeothers, oil skimming has remained our specialty.EASE OF INSTALLATION, OPERATION, AND MAINTENANCE:• Depending on the unit, installation times range from 5 to 45 minutes. Abanaki skimmer'ssmall imprint allows easy installation with little or no modification to existing structures. Avariety of electrical sources can be used, so that the customer can specify electrical box /switch setup. And our concise installation instructions are the best in the industry.GREAT RANGE OF CAPACITIES:• Abanaki skimmers have removal rates ranging from 1 gallon per hour (3.8 liters per hour) tomore than 200 gph (757 lph). LIFTING POWER:• A single unit elevates and separates oil distances as little as 6 inches (15 cm) up to 100 feet(3048 cm) or more. OUTPUT QUALITY:• Our skimmers have satisfied EPA requirements of leaving less than 5ppm (parts per million)of oil in water. In addition, with an Abanaki Oil Concentrator™, the oil skimmer will pick upless than 1% water with the removed product. VALUE:• Operating an Abanaki skimmer can actually save you money. Our skimmers require littlelabor, conserve wash water, lengthen coolant life and reduce disposal costs while allowingremoved oil to be reused or recycled. All Abanaki skimmers are designed to give years ofoperation in the most demanding conditions.NEXT DAY DELIVERY ANYWHERE IN THE CONTINENTAL U.S.A.• Most of our standard oil skimmers and spare parts are stock items ready to ship. In case ofemergencies, we can have a skimmer at your door in less than 24 hours, ready to solve yourhydrocarbon contamination. Understanding and choosing an appropriate skimmerABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0004040-4 www.abanaki.comCapacityWhat is the maximum amount of oil to be removed, and the shortest period of time available todo it? Example:• For instance, total input may be 200 gallons within a 24-hour period, which is about 8.3gallons per hour. This data suggests a 4" Tote-It would be the skimmer ideal for thisapplication (see below). However, should this oil contamination require removal in a shorterperiod of time, then an Oil Grabber? Model 4 or 82 would be a better choice. Therefore, tohandle unforeseen emergencies, we recommend choosing a skimmer with twice the capacityyou would anticipate in normal conditions.Capacity MM*1” SSTMM*2” SSTTote-It/Petro 1"Tote-It/Petro 2"Tote-It/Petro 4"Oil Grabber4"Oil Grabber8"MB*2 x 8MB*3 x 8MB*5 x 81 GPH ? ? ? ? ? ? ? ? ? ?2 GPH ? ? ? ? ? ? ? ? ?3 GPH ? ? ? ? ? ? ? ?6 GPH ? ? ? ? ? ? ?12 GPH ? ? ? ? ? ?20 GPH ? ? ? ? ?40 GPH ? ? ? ?80 GPH ? ? ?120 GPH ? ?200 GPH ? * (MM – Mighty-Mini) * (MB – Multi-Belt)Capacity TubeTastic Tube Mighty Disk1 GPH ? ?3 GPH ?NOTE:• Skimmer capacity is not affected by the length of the belt.• The entire tail pulley must be under water for maximum skimmer efficiency.• Choose a belt length that will allow for easy mounting of the skimmer where oil discharge isconvenient, and has access for routine maintenance. Abanaki's ability to use belts to liftskimmed material well over 100-feet with almost no loss in capacity or efficiency is animportant feature for many users.Understanding and choosing an appropriate skimmerABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0004040-5 www.abanaki.com INFORMATION ABOUT ABANAKI BELTSCorrosion Resistant Belt Series - After years of research and testing, this has become the material ofchoice. The CR steel belt is made from a specially formulated stainless steel alloy that is high in chrome,low in molybdenum, and low in carbon. The CR belt stands up to high temperatures and harsh chemicals.With belts operating continuously for 10 years in some cases, applications for this belt are almost limitless.The only limitations on its' use are certain combinations of temperature, pH levels, and type of solutions.Elastomeric Belt Series - Our specially formulated elastomer is more attractive to oil and repellent to waterthan competitive products. It is an extremely durable material able to withstand rough handling duringinstallation and maintenance. The elastomer belt is ideal in applications where abrasive particles are presentor when physical abuse of the belt is likely. The single material belt will not delaminate and is designed forcontinuous operation. The ideal temperature range when using this material is between 50oF (10oC) and140oF (60oC). Elastomer is also UV sensitive, so prolonged exposure to the sun should be avoided. Poly-Belt - A polyester mono-filament with polyurethane liner, this material is available for demandingapplications such as turbulent solutions or explosive atmospheres. An ideal application for the poly-belt isoil remediation using existing monitoring wells. It is also recommended for excessive long distances to pullheavy oils with no stretching. The poly-belt has an operating temperature range between 14oF(-10oC) and170oF(77oC) continuous. The poly-belt is also effective for picking up certain types of floatingemulsified oils.Poly-XP – A NBR (textured pattern, blue) coated polyamide fabric, 1.25mm thick. Temperature range -4°F(-20°C) to 140°F (60°C) continuous, -22°F (-30°C) to 212°F (100°C) intermittent. This belt has a highstrength pre-set nylon core with superior resistance to flexing fatigue. Resistant to fats, oils, grease,gasoline, and many other chemicals & solvents. Not resistant to Phenol, Cresol, and concentrated acids.Poly-HT - The Poly-HT belt material can be used in applications where temperatures range between 14°F(-10°C) and 212°F (100°C) without stretching. It can also withstand harsh chemical environments such asthose found in the plating industry. LFO "Fuzzy" Polymer Belt - The Patent Pending LFO Polymer belt is specifically designed for highvolume recovery of light to medium weight oils. The pickup fibers are .18" in cut length with a density of18 denier and are mounted on a woven polymer backing at an angle of 45° in the direction of belt travel.Gasoline, diesel, jet fuels, etc. are recovered quickly and efficiently; expected recovery can be increased byas much as a factor of 95 from our other belts (SAE30 oil tested at a factor of 3). The belt is designed for33°F (.5°C) to 160°F (71°C) with pH levels of 3 to 11. Reinforced to prevent stretching, this belt hastremendous surface area with only minimal change to the footprint of our more "standard" belts.BELT SAMPLES ARE AVAILABLE FOR TESTING.Understanding and choosing an appropriate skimmerABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0004040-6 www.abanaki.comCHOOSING THE RIGHT BELT MATERIALAbanaki offers six different belt materials, each with its own properties. The chart below indicates the appropriatebelt for the most common applications. The guidelines below are general, actual performance of belts will dependon the variables of each application. Heat, for example, increases a belt's sensitivity to pH levels. To help choosethe right belt for your application, Abanaki offers free samples of the available belt material for testing.Belt Capabilities CorrosionResistant Steel Elastomer Poly-Belt Poly-XP Poly-HTLFO"Fuzzy"+ 150°F (66oC) YES NO YES YES YES YES pH down to 3 pH up to 13 YES YES YES YES YESYES (down to 3)NO (up to 11)Can operate in the presence ofgrit, fine and other suspendedparticlesYES YES YES YES YES YESBELT ORDERING INFORMATION:Oil Grabbers?:(Model 82, Model 4, MB)• The belt length is determined by the distance between the centers of the two pulleys. This is the center tocenter length. It is determined by measuring the distance from the mounting plane to the liquid at its lowestlevel, and adding 2 feet (61 cm). See "Belt Length Layout Drawing" for each model.• Oil Grabber? belts can be ordered in any size between 1'6" to 100' (feet), rounded off to the nearest 6 inches.All belt lengths up to 4 feet have the same base price with belt lengths over 4 feet priced on a cost per footbasis.Portables: (Tote-It?,PetroXtractor?)• The belt length is determined by the distance between the centers of the two pulleys. The center to centerlength is determined by measuring the distance from the mounting plane to the liquid at its lowest level, andadding 1 foot (30 cm). See "Belt Length Layout Drawing" for each model.• Tote-It belts can be ordered in any size between 1'6" to 5' (feet), rounded off to the nearest 6 inches. All beltlengths up to 5 feet are priced according to the unit. Belt lengths over 5 feet can be arranged using a specialadapter and are priced accordingly.• PetroXtractor belts can be ordered in any size up to 110’, typically in increments of 6”. (Mighty-Mini?SST)• The belt length is determined by measuring the distance from the mounting plane to the bottom of the tailpulley. Lengths available are 6”, 12”, 18” and 24” Steel belts should be handled with care(Nicks and Creases Substantially reduce the belt's life.) Abanaki products should only be used with approved Abanaki belts and wiper blades.Understanding and choosing an appropriate skimmerABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0004040-7 www.abanaki.comSPECIFYING WIPER BLADE MATERIALWiper blades are offered in five different materials to suit a variety of operating conditions. Thestandard material is Nitrile, which is appropriate for 95% of all applications. One of the optionalmaterials, CRV, is recommended for particularly harsh conditions.WHAT TYPE OF WIPER BLADES ARE BEST? The charts below illustrate characteristics of each material.PROPERTY NITRILE CRVMinimum recommended temp oF (oC) -25 (-32) -20 (-29)Maximum recommended temp oF (oC) +240 (+116) +400 (+204)Hardness (durometer) A40-95 A70-80Resistance to: Tearing Good Poor to fair Abrasion Good-Excellent Good Oxidation Good Outstanding Aliphatic hydrocarbons Excellent Excellent Aromatic hydrocarbons Good Excellent Oxygenated alcohol's Good Excellent Dilute or Concentrated acids Good Good-ExcellentPROPERTY CERAMIC STAINLESS STEEL HYBRIDMinimum recommended temp oF (oC) All Temperatures All Temperatures -40 (-40)Maximum recommended temp oF (oC) All Temperatures All Temperatures +140 (+60)Resistance to: Tearing N/A N/A Excellent Abrasion Excellent Excellent Excellent Oxidation Excellent Excellent Excellent Aliphatic hydrocarbons Excellent Excellent Excellent Aromatic hydrocarbons Excellent Excellent Excellent Oxygenated alcohol's Excellent Excellent Not Tested Dilute or Concentrated acids Excellent Excellent ExcellentNOTES:• Both Nitrile and CRV wiper blades have excellent resistance to heat aging.• CRV is recommended for outdoor use (Nitrile is sensitive to UV rays)(All data comes from Perry's Chemical Engineer's Handbook, 6th edition.)Understanding and choosing an appropriate skimmerABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0004040-8 www.abanaki.comTYPE OF MOTORAll Abanaki skimmers are designed to be driven by standard, industrially rated, motors with fullyenclosed speed reducing drives. Abanaki skimmers can be specified with the following motors:• Drip Proof• TEFC ( Totally Enclosed Fan Cooled )• Severe Duty• Explosion Proof - Class I, Group D Class II, Groups F & G• Weather Protected Type• Chemical Duty• 12vDCWHAT TYPE OF MOTOR DO YOU REQUIRE?The following are the standard motors available with Abanaki belt skimmers:Oil Grabbers?• 60Hz 1-ph 115/208-230v 1/4hp 1725rpm 56C Face TEFC• 60Hz 3-ph 208-230/460v 1/4hp 1725rpm 56C Face TEFC• 50Hz 1-ph 110/220v 1/2hp 1425rpm 56C Face TEFC• 50Hz 3-ph 220/380/440v 1/2hp 1425rpm 56C Face XPFCTote-It? Portable • gear motor, 60Hz 115v 1/20hp 12rpm • gear motor, 50Hz 110/220v 12.5rpm 60Hz 115/230v 15rpmMighty Mini? SST• gear motor, 60Hz 115v 30rpm needle bearing fan-cooled• gear motor, 50Hz 230v 30rpm needle bearing fan-cooledGrease Grabber?• 60Hz 1-ph 115/208-230v 1/4hp 1725rpm 56C Face TEFC• 50Hz 1-ph 110/220v 1/2hp 1425rpm 56C Face TEFCPetroXtractor?• gear motor, 60Hz 115v 1/20hp 30rpm • gear motor, 60Hz 115v 1/20hp 12rpm• gear motor, 50Hz 110/220v 12.5rpm 60Hz 115/230v 15rpmUnderstanding and choosing an appropriate skimmerABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0004040-9 www.abanaki.comThe following are the standard motors available with Abanaki disk and tube skimmers:Mighty? Disk Skimmer• Gear Motor, 60Hz 115v 7rpm• Gear Motor, 50Hz 260v 7rpm• Gear Motor, 60Hz 115v 3.5rpm• Gear Motor, 50Hz 260v 3.5rpmTubeTastic? Tube Skimmer • Gear Motor, 60Hz 115v 45rpm • Gear Motor, 50Hz 260v 45rpm If you are faced with an unusual requirement, contact the factory about the availability of specialmotors, controls and drive components.Understanding and choosing an appropriate skimmerABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0004040-10 www.abanaki.comOptional EquipmentAbanaki oil skimmers offers various options to adapt to different applications. Some of themost common options are listed below: Mounting stands: Concentrator and Options:Barrel mount support bracket for the Tote-It Tote-It mounting adapter5' storage stand for the Tote-it Stainless steel Concentrator (SS 316) - OC-110 Universal mounting stand 48" high Concentrator with heater OC-110 & OC-200Cage type stand for pits Other OptionsHeater hood for outdoors (Model 82 and 2x8)Yokes and chains for all skimmersBelt RetainerOil Grabber Portable Multi-Belt UnitsOPTIONS AND OTHERCAPABILITIES Model 82 Model 4 Tote-It 1",2",4"PetroXtractor1",2",4" MB 2x8 MB 3x8 MB 5x8HEATED DECANTER ? ? ? ? ? ?MORE THAN 10 FEET OFLIFTING DISTANCE ? ? ? ? ? ?HEATED HOOD FOROUTDOOR COLDWEATHER APPLICATIONS? ? ? ?AVAILABLE IN 316STAINLESS ? ? ? ? ? ? ?CORROSION RESISTANTSTEEL BELT ? ? ? ? ? ?OUTDOOR SHELTER ? ? ? ? ? ? ?BELOW GRADE UNIT ? ?VAPOR TIGHTENCLOSURE ? ?FLOAT SWITCHDRUM SHUTOFF ? ? ? ? ? ? ?Understanding and choosing an appropriate skimmerABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0004040-12 www.abanaki.comInstructions: copy sheets, complete worksheet and then fax to Abanaki.Name:_____________________________________, PH:________________, Fax:_______________Company:__________________________________________________________________________Address:___________________________________________________________________________Capacity in GPH MODEL OF SKIMMER ? one Quantity1 Mighty Mini 1" SST2 Mighty Mini 2" SST3 Tote-It Portable 1"PetroXtractor 1"6 Tote-It Portable 2"PetroXtractor 2"12 Tote-It Portable 4"PetroXtractor 4"20 Oil Grabber Model 440 Oil Grabber Model 8280 Multi-Belt 2x8 Unit120 Multi-Belt 3x8 Unit160 Grease Grabber200 Multi-Belt 5x8 UnitOptional SS construction (Y/N)? _____? one TYPE OF BELT LENGTH OF BELT(Length of belt measured ctr-ctr between head pulleys)STAINLESS STEELELASTOMERPOLY BELTPOLY-XPPOLY-HTLFO "Fuzzy"Capacity in GPH MODEL OF SKIMMER ? one Quantity1-1/2 TubeTastic Tube2 Mighty Disk 12”2 Mighty Disk 18”? one TubeTastic ? one Mighty Disk ? one Mighty Disk6” Tube 12” Standard Disk 12” High Temp. Disk12” Tube 18” Standard Disk 18” High Temp. Disk18” Tube24” TubeUnderstanding and choosing an appropriate skimmerABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0004040-12 www.abanaki.comWIPER BLADE MATERIAL ? oneNITRILE (Standard on Carbon Steel units)CRV (Standard on SS units)CeramicStainless SteelHybrid? HEATER FOR SKIMMER (single phase only). Available on Model 82 and Multi Belt units only.OIL SKIMMER STANDS AND MOUNTS Circle ChoiceMIGHTY MINI PETROXTRACTOR TOTE-IT MODEL 4 & 82 MULTI-BELT UNITS DUAL POSITION DRUM MOUNT DRUM MOUNT 4' STANDMOUNTING BRACKET 4' STAND 4' STAND SURFACE MOUNT MB STANDSTORAGE STAND CHANNEL MOUNTTAIL PULLEY options YOKE &TETHERBELTRETAINER SS CONSTRUCTION? all that applyCONCENTRATORS v CONCENTRATOR v OPTIONAL HEATER v OPTIONAL S.S.CONSTRUCTIONODM-100 Mighty-Mini 1" and 2",Tote-It 1" and 2" N/A N/AOC-110 Tote-It 4", PetroXtractor PX-A,PX-B and PX-C, Model 4, and Model 82OC-200 Multi-Belt UnitsMighty Disk N/AOutdoor Shelters, Below Grade Unit, and Vapor Tight Enclosure Options ? all that apply Model 82 Model 4 Tote-It 1",2",4" PetroXtractor 1",2",4" Multi-Belt UnitsOutdoor ShelterBelow Grade Unit N/A N/A N/A N/AVapor Tight Enclosure N/A N/A N/ADescription of application. Please include type of oil, pH and temperature of solution, and size of tank(dimensionally and gallon capacity). Include a sketch if possible. • Use these sheets when inquiring about possible configurations, always consult the factory for exact and up to date information.Thank you for specifying an Abanaki Skimmer.ABANAKIABANAKI CORPORA17387 Munn Road CPhone: 1-800-358Spec:0104041-1 wwwOil Grabber? Model 82Quick Summary:A heavy duty oil skimmer, using patented technology, to solve large oilcontamination problems. Special options available with the Model 82include: all stainless steel construction, vapor tight enclosure, infraredheater hood for non-explosive freezing applications and a completesystem control box. Also the Model 82 has the versatility of the standardchannel mount or optional flat surface mount. Applications include: truckwashes, heat treating plants and power plants.Highlights:1. A continuous 8" belt of corrosion resistant steel or elastomer up to100 feet center to center.2. Oil discharge is through 3" M.P.T. coupling odel, anda 5" channel on channel mount model.3. A removable steel guard for visual inspectio4. TEFC motor.5. Removes up to 40 gallons of medium weigh6. Adjustable wiper blade assembly.CAP.GAL. MODELBELTWIDTHBELTLENGTHRPMAMPS40 1 x 8 8" Up to100 ft.1725 RP5/2.6/2.40 1 x 8 8" Up to100 ft.1725 RP1.4/1.3/.Note: Additional motors, including explosion proof, are availablisting of motors. Always consult the factory for special aQuick Chart: on flat mount mTION © All rights reserved 2004hagrin Falls, Ohio 44023 U.S.A.-SKIM Fax: (440) 543-7404.abanaki.comn of drive pulley. t oil per hour.VOLTS Hz PHASERAM5115/208-23060Hz1 PHTEFC1427M65208-230/46060Hz3 PHTEFC1422/le per customer specification. See motopplications.STANDARD MOTORPMMPSVOLTSHz5 RPM.2/3.6110/22050Hz5 RPM1.2/1220/380/44050Hzr spec sheet for completeOPTIONAL MOTORABANAKISkimmer SpecificationsOil Grabber? Model 82ABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0104041-2 www.abanaki.comPART 1: GENERAL1.01 Construction1. Solid welded carbon steel with a baked onpowder coat finish.A. Color: Dark Safety Blue.2. Stainless Steel. 1.02 Pulley Types1. Drive Pulley (Head Pulley)A. Magnetic drive pulley. Two magnetassemblies per cross bar with 8 cross barsper head.2. Tail PulleyA. Solid drum type, free floating in belt. Withcollars for shaft when yoke & chain arerequired.B. High Capacity.1.03 Motor: (one of two motors standard)1/4 H.P. 1 PH 60Hz TEFC 1725 RPM 56 C-Face 115/208-230 Volt 5 / 2.6 / 2.5 Ampsor 1/4 H.P. 3 PH 60Hz TEFC1725 RPM 56 C-Face208-230/460 Volt1.4 / 1.3 / .65 Amp1.04 Gear Reducer1. Standard C-FaceA. 150:1 double reductionB. Oil filledC. Bronze gears/ball bearingsSee separate specification sheet for additional details1.05 Guard1. Solid cover over drive pulley area.1.06 Belt Material and Length1. Standard Corrosion Resistant Steel Belt.2. Length as required up to 100'.1.07 Wiper Blades1. Standard Material: Nitrile.A. Front Wiper Assembly - Spring tensionedwith single wiper insert.B. Rear Wiper Assembly - Stationary wiperholder, single wiper insert.1.08 Oil Discharge Outlet1. Standard Channel MountA. Dual troughs discharging into a single 5"channel to oil collection tank.2. Flat Surface Mount OptionalA. Dual troughs discharging through a 3"M.P.T.1.09 Mounting Arrangements1. Standard Skimmer ConfigurationA. 5 x 6.7 (5" channel) x 20" long minimum;also doubles as discharge outlet.2. Optional Skimmer ConfigurationsA. Flat Surface Mount with 3" M.P.T. forpiped discharge.B. 4 x 7.25 (4" channel) same as 1.09.1, useof 5 x 6.7 preferred.1.10 Weights and Size1. 61 lbs. skimmer + 20 lbs. motor = 81 lbs/unit2. Overall size of std. unit: 29-1/2"L x 16"W x20"H3. Overall size of unit w/heater: 29-1/2"L x 20"W x20"H1.11 Mounting Requirements1. Minimum Opening for Tail Pulley with Yoke:16" Dia.2. Minimum Opening for Tail Pulley with Yokeand Retainer: 18" Dia.3. Minimum Mounting Height: 20"4. Minimum Mounting Height w/optional 4' stand: A. Channel mount: 66-1/4" B. Flat mount: 69-3/8"1.12 Power Requirements1. Hard wired per motor and local/national code.1.13 Optional Mounting Arrangements1x8 Mounting Stand will support a single 1x8 and asingle OC-110 decanter. Stand is 48" high.ABANAKIElectric Motor ListOil Grabber? Model 82ABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0104041-3 www.abanaki.comStandard motors 60 Hz:1/4 H.P. 1 PH 60 Hz TEFC1725 RPM 56 C-Face115/208-230 Volt5 / 2.6 / 2.5 Ampor1/4 H.P. 3 PH 60Hz TEFC1725 RPM 56 C-Face208-230/460 Volt1.4 / 1.3 / .65 AmpOptional 50Hz motors:1/2 H.P. 1 PH 50 Hz TEFC1425 RPM 56 C-Face110/220 Volt7.2 / 3.6 Ampor1/2 H.P. 3 PH 50 Hz TEFC1425 RPM 56 C-Face220/380/440 Volts2 / 1.2 / 1 AmpOptional Explosion-Proof Motors 50 & 60 Hz:1/3 H.P. 1 PH 60 Hz EXP. 1725 RPM 56 C-Face115/208-230 Volt6 / 3.2 / 3 Amp1/3 H.P. 3 PH 60 Hz EXP. 1725 RPM 56 C-Face208-230/460 Volt1.8 / 1.6 / .8 Amp1/2 H.P. 3 PH 50 Hz EXP. 1425 RPM 56 C-Face220/380/440 Volt2 / 1.2 / 1 Amp1/2 H.P. 1 PH 50 Hz EXP. 1425 RPM 56 C-Face110/220 Volt7.2 / 3.6 AmpOptional 575 Volt Motors1/3 H.P. 3 PH 60 Hz TEFC1725 RPM 56 C-Face575 Volt.64 Amp1/2 H.P. 3 PH 60Hz EXP. 1725 RPM 56 C-Face575 Volt.9 Amp1/2 H.P. 3PH 60Hz TEFC1725 RPM 56 C-Face575 Volt.8 AmpKen Fagan10/12/99ABANAKIABANAKI CORPORA17387 Munn Road CPhone: 1-800-35Spec:0204042-1 wwwOil Grabber? Model 4Quick Summary:Essentially the same as the Model 82, the Model 4 and its patentedtechnology will fit into a smaller sump opening with its' 4" belt.Mounting and discharge using a 4" or 5" channel is standard.Other options include: a 4' mounting stand with 5" channelcombination, or a flat mount arrangement with discharge through a1-1/2" M.P.T. The Model 4 can accept any standard 56 C-Facemotor or metric D63C frame size motor with optional gearreducer.Highlights:1. A 4" continuous belt of corrosion resistant steel or elastomerup to 100 ft in length.2. Oil discharge is through 1-1/2" M.P.T. outlet3. A removable steel mesh guard for visual inspection of drivepulley.4. Belt removal requires no tools.5. TEFC motor std. 1PH or 3PH6. Removes up to 20 gallons of medium w7. Adjustable wiper blade assembly. CAP.GAL. MODELBELTWIDTHBELTLENGTHRPAM20 4 4" Up to100 ft.1725 5/2.620 4 4" Up to100 ft.1725 1.4/1Note: Additional motors, including explosion proof, are avacomplete listing of motors. Always consult the factorQuick Chart:TION © All rights reserved 2004hagrin Falls, Ohio 44023 U.S.A.8-SKIM Fax: (440) 543-7404.abanaki.comeight per hour. MPSVOLTS Hz PHASERPMAMPSVOLTSHzRPM/2.5115/208-23060Hz1 PHTEFC1425 RPM7.2/3.6110/22050HzRPM.3/.65208-230/46060Hz3 PHTEFC1425 RPM2/1.2/1220/380/44050Hzilable per customer specification. See motor spec sheet fory for special applications.STANDARD MOTOR OPTIONAL MOTORABANAKI Model 4SKIMMER SPECIFICATION SHEETABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0204042-2 www.abanaki.comPART 1: GENERAL1.01 Construction1. Solid welded carbon steel with a baked on powdercoat finish.A. Color: Dark Safety Blue.2. Stainless Steel. 1.02 Pulley Types1. Drive Pulley (Head Pulley)A. Magnetic drive pulley for metal belt. Twomagnet assemblies per cross bar with 8 crossbars per head.2. Tail PulleyA. Solid drum type, free floating in belt. Withcollars for shaft when yoke & chain arerequired.B. High Capacity.1.03 Motor: (one of two motors standard)1/4 H.P. 1 PH 60Hz TEFC 1725 RPM 56 C-Face 115/208-230 Volt 5 / 2.6 / 2.5 Ampsor 1/4 H.P. 3 PH 60Hz TEFC1725 RPM 56 C-Face208-230/460 Volt1.4 / 1.3 / .65 Amp1.04 Gear Reducer1. Standard C-Face A. 150:1 double reduction B. Oil filled C. Bronze gears/ball bearingsSee separate specification sheet for additional details1.05 Guard1. Standard enclosed steel housing with a flat steelmesh screen door for access for drive pulley area.1.06 Belt Material and Length1. Standard Corrosion Resistant Steel Belt.2. Length as required up to 100'. 1.07 Wiper Blades1. Standard Material: Nitrile.A. Front Wiper Assembly - Spring tensionedwith single wiper insert.B. Rear Wiper Assembly - Stationary wiperholder, single wiper insert.1.08 Oil Discharge Outlet1. Standard Channel MountA. Dual troughs discharging into a single 5"channel to oil collection tank.2. Flat Surface Mount OptionalA. Dual troughs discharging through a 1-1/2"M.P.T.1.09 Mounting Arrangements1. Standard Skimmer ConfigurationA. 5 x 6.7 (5" channel) x 20" long minimum;also doubles as discharge outlet.2. Optional Skimmer ConfigurationsA. Flat Surface Mount with 1-1/2" M.P.T. forpiped discharge.B. 4 x 7.25 (4" channel) same as 1.09.1, use of5 x 6.7 preferred.1.10 Weights and Size1. 62 lbs. skimmer + 20 lbs. motor = 82 lbs/unit2. Overall size of unit: 24-1/2"L x 18-1/4"W x 21-1/4"H1.11 Mounting Requirements 1. Minimum Opening for Tail Pulley with Yoke andRetainer: 16" Dia. 2. Minimum Opening for Tail Pulley with Yoke: 13"Dia. 3. Minimum Mounting Height: 21-1/4" 4. Minimum Mounting Height w/optional 4' stand: 69-1/2"1.12 Power Requirements1. Per customers motor spec.2. Hard wired per motor and local/national code.1.13 Optional Mounting Arrangements1. 1x8 Mounting Stand will support a single 1x4 anda single OC-110 decanter. Stand is 48" high.ABANAKIElectric Motor ListOil Grabber? Model 4 ABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0204042-3 www.abanaki.comStandard motors 60 Hz:1/4 H.P. 1 PH 60 Hz TEFC1725 RPM 56 C-Face115/208-230 Volt5 / 2.6 / 2.5 Ampor1/4 H.P. 3 PH 60Hz TEFC1725 RPM 56 C-Face208-230/460 Volt1.4 / 1.3 / .65 AmpOptional 50Hz motors:1/2 H.P. 1 PH 50 Hz TEFC1425 RPM 56 C-Face110/220 Volt7.2 / 3.6 Ampor1/2 H.P. 3 PH 50 Hz TEFC1425 RPM 56 C-Face220/380/440 Volts2 / 1.2 / 1 AmpOptional Explosion-Proof Motors 50 & 60 Hz:1/3 H.P. 1 PH 60 Hz EXP. 1725 RPM 56 C-Face115/208-230 Volt6 / 3.2 / 3 Amp1/3 H.P. 3 PH 60 Hz EXP. 1725 RPM 56 C-Face208-230/460 Volt1.8 / 1.6 / .8 Amp1/2 H.P. 3 PH 50 Hz EXP. 1425 RPM 56 C-Face220/380/440 Volt2 / 1.2 / 1 Amp1/2 H.P. 1 PH 50 Hz EXP. 1425 RPM 56 C-Face110/220 Volt7.2 / 3.6 AmpOptional 575 Volt Motors1/3 H.P. 3 PH 60 Hz TEFC1725 RPM 56 C-Face575 Volt.64 Amp1/2 H.P. 3 PH 60Hz EXP. 1725 RPM 56 C-Face575 Volt.9 Amp1/2 H.P. 3PH 60Hz TEFC1725 RPM 56 C-Face575 Volt.8 AmpKen Fagan12/11/98Ken Fagan12/09/98Ken Fagan11/19/96Ken Fagan11/19/96ABANAKIABANAKI CORPOR17387 Munn Road Phone: 1-800-3wSpec:0304043-1Oil Grabber? Model MB - Multi BeltsQuick Summary:A heavy duty oil skimmer to solve serious oil contamination problems.Special options available with the Model MB include: all stainless steelconstruction, infrared heater hood for non-explosive freezingapplications and a complete system control box. Applications include:truck washes, heat treating plants, oil refineries and power plants.Highlights:1. An 8" continuous belt of corrosion resistant steel or elastomer upto 100 feet center to center.2. Removable steel mesh guard for visual inspection of drive pulley.3. TEFC motor.4. Removes up to 40 gallons of medium weight oil per hour per 8"belt.CAP.GAL. MODELBELTWIDTHAREABELTLENGTHRPMAM80 2 x 8 2 x 8" Up to100 ft.1725 R5/2.680 2 x 8 2 x 8" Up to100 ft.1725 R1.4/1.3120 3 x 8 3 x8" Up to100 ft.1725 R5/2.6120 3 x 8 3 x 8" Up to100 ft.1725 R1.4/1.3200 5 x 8 5 x 8" Up to100 ft.1725 R5/2.6200 5 x 8 5 x 8" Up to100 ft.1725 R1.4/1.3Note: Additional motors, including explosion proof,are available per cuAlways consult the factory for special applications.Quick Chart:MB2X8SHOWNATION © All rights reserved 2004Chagrin Falls, Ohio 44023 U.S.A.58-SKIM Fax: (440) 543-7404ww.abanaki.comPSVOLTS Hz PHASEPM/2.5115/208-23060Hz1 PHTEFC147PM/.65208-230/46060Hz3 PHTEFC142PM/2.5115/208-23060Hz1 PHTEFC147PM/.65208-230/46060Hz3 PHTEFC142PM/2.5115/208-23060Hz1 PHTEFC147PM/.65208-230/46060Hz3 PHTEFC142stomer specification. See motor spec sheet for STANDARD MOTORRPMAMPSVOLTSHz25 RPM.2/3.6110/22050Hz25 RPM/1.2/1220/380/44050Hz25 RPM.2/3.6110/22050Hz25 RPM/1.2/1220/380/44050Hz25 RPM.2/3.6110/22050Hz25 RPM/1.2/1220/380/44050Hzcomplete listing of motors.OPTIONAL MOTORABANAKI Model MB 2 x 8SKIMMER SPECIFICATION SHEETABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404www.abanaki.comSpec:0304043-2PART 1: GENERAL1.01 Construction1. Solid welded carbon steel with a baked on powdercoat finish.A. Color: Dark Safety Blue.2. Stainless Steel. 1.02 Pulley Types1. Drive Pulley (Head Pulley)A. Magnetic drive pulley for metal belt. Twomagnet assemblies per cross bar with 8 crossbars per head.2. Tail PulleyA. Solid drum type, free floating in belt.B. Collars for shaft when used with yoke, chain& retainer.C. High Capacity.1.03 Motor: (one of two motors standard)1/4 H.P. 1 PH 60Hz TEFC 1725 RPM 56 C-Face 115/208-230 Volt 5/2.6/2.5 Ampsor 1/4 H.P. 3 PH 60Hz TEFC1725 RPM 56 C-Face208-230/460 Volt1.4 1.3 .65 Amp1.04 Gear Reducer1. Standard C-Face A. 150:1 double reduction B. Oil filled C. Bronze gears/ball bearings1.05 Guard1. Standard flat steel mesh screen over drive pulleyarea.1.06 Belt Material and Length1. Standard Corrosion Resistant Steel Belt.2. Length as required up to 100'.1.07 Wiper Blades1. Standard Material: Nitrile.A. Front Wiper Assembly - Spring tensionedwith single wiper insert.B. Rear Wiper Assembly - Stationary wiperholder, single wiper insert.1.08 Oil Discharge Outlet1. Standard Channel MountA. Dual troughs discharging into a single 5"channel to oil collection tank.1.09 Mounting Arrangements1. Standard Skimmer ConfigurationA. 5 x 6.7 (5" channel) x 20" long minimum;also doubles as discharge outlet.1.10 Weights and Size1. 74 lbs. skimmer + 20 lbs. motor = 94 lbs/unit2. Overall size of unit: 38"L x 16-1/2"W x 21-1/4"H3. Tail Pulley: 10 lbs. each1.11 Mounting Requirements1. Sump Opening size for Tail Pulleys with Yokes:12" x 24"2. Sump Opening size for Tail Pulleys with Yokesand Retainers: 14" x 24"3. Minimum Mounting Height: 20"4. Minimum Mounting Height w/optional stand: 66-3/8"1.12 Power Requirements1. Hard wired per motor and local/national code.1.13 Optional Mounting Arrangements1. 2x8 Mounting Stand will support up to a single 3x8skimmer and up to a single OC-200 decanter withpivot mount.ABANAKI Model MB 3 x 8SKIMMER SPECIFICATION SHEETABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404www.abanaki.comSpec:0304043-3PART 1: GENERAL1.01 Construction1. Solid welded carbon steel with a baked on powdercoat finish.A. Color: Dark Safety Blue.2. Stainless Steel. 1.02 Pulley Types1. Drive Pulley (Head Pulley)A. Magnetic drive pulley for metal belt. Twomagnet assemblies per cross bar with 8 crossbars per head.2. Tail PulleyA. Solid drum type, free floating in belt.B. Collars for shaft when used with yoke, chain& retainer.C. High Capacity.1.03 Motor: (one of two motors standard)1/4 H.P. 1 PH 60Hz TEFC 1725 RPM 56 C-Face 115/208-230 Volt 5 / 2.6 / 2.5 Ampsor 1/4 H.P. 3 PH 60Hz TEFC1725 RPM 56 C-Face208-230/460 Volt1.4 / 1.3 / .65 Amp1.04 Gear Reducer1. Standard C-Face A. 150:1 double reduction B. Oil filled C. Bronze gears/ball bearings1.05 Guard1. Standard flat steel mesh screen over drive pulleyarea.1.06 Belt Material and Length1. Standard Corrosion Resistant Steel Belt.2. Length as required up to 100'.1.07 Wiper Blades1. Standard Material: Nitrile.A. Front Wiper Assembly - Spring tensionedwith single wiper insert.B. Rear Wiper Assembly - Stationary wiperholder, single wiper insert.1.08 Oil Discharge Outlet1. Standard Channel MountA. Dual troughs discharging into a single 5"channel to oil collection tank.1.09 Mounting Arrangements1. Standard Skimmer ConfigurationA. 5 x 6.7 (5" channel) x 20" long minimum;also doubles as discharge outlet.1.10 Weights and Size1. 86 lbs. skimmer + 20 lbs. motor = 106 lbs/unit2. Overall size of unit: 42-1/2"L x 16-1/2"W x 20"H3. Tail Pulley: 10 lbs. each1.11 Mounting Requirements1. Sump Opening size for Tail Pulleys with Yokes:12" x 36"2. Sump Opening size for Tail Pulleys with Yokesand Retainers: 14" x 36"3. Minimum Mounting Height: 20"4. Minimum Mounting Height w/optional stand: 66-3/8"1.12 Power Requirements1. Hard wired per motor and local/national code.1.13 Optional Mounting Arrangements1. 2x8 Mounting Stand will support up to a single 3x8skimmer and up to a single OC-200 decanter withpivot mount..ABANAKI Model MB 5 x 8SKIMMER SPECIFICATION SHEETABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404www.abanaki.comSpec:0304043-4PART 1: GENERAL1.01 Construction1. Solid welded carbon steel with a baked on powdercoat finish.A. Color: Dark Safety Blue.2. Stainless Steel. 1.02 Pulley Types1. Drive Pulley (Head Pulley)A. Magnetic drive pulley for metal belt. Twomagnet assemblies per cross bar with 8 crossbars per head.2. Tail PulleyA. Solid drum type, free floating in belt.B. Collars for shaft when used with yoke, chain& retainer.C. High Capacity.1.03 Motor: (one of two motors standard)1/4 H.P. 1 PH 60Hz TEFC 1725 RPM 56 C-Face 115/208-230 Volt 5 / 2.6 / 2.5 Ampsor 1/4 H.P. 3 PH 60Hz TEFC1725 RPM 56 C-Face208-230/460 Volt1.4 / 1.3 / .65 Amp1.04 Gear Reducer1. Standard C-Face A. 150:1 double reduction B. Oil filled C. Bronze gears/ball bearings1.05 Guard1. Standard flat steel mesh screen over drive pulleyarea.1.06 Belt Material and Length1. Standard Corrosion Resistant Steel2. Length as required up to 100'.1.07 Wiper Blades1. Standard Material: Nitrile.A. Front Wiper Assembly - Spring tensionedwith single wiper insert.B. Rear Wiper Assembly - Stationary wiperholder, single wiper insert.1.08 Oil Discharge Outlet1. Standard Channel MountA. Dual troughs discharging into a single 5"square tube to oil collection tank.1.09 Mounting Arrangements1. Standard Skimmer ConfigurationA. 5" structural square tube 12ga. mount alsodoubles as discharge outlet.1.10 Weights and Size1. 110 lbs. skimmer + 20 lbs. motor = 130 lbs/unit2. Overall size of unit: 70-1/2"L x 18"W x 26-1/2"H3. Tail Pulley: 10 lbs. each1.11 Mounting Requirements1. Sump Opening size for Tail Pulleys with Yokes:12" x 60"2. Sump Opening size for Tail Pulleys with Yokesand Retainers: 14" x 60"3. Minimum Mounting Height: 20"4. Minimum Mounting Height w/optional stand: Per-customer1.12 Power Requirements1. Hard wired per motor and local/national code.1.13 Optional Mounting Arrangements1. per customer..ABANAKI Electric Motor ListOIL GRABBER? MODEL: MULTI BELTSABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404 www.abanaki.comSpec:0304043-5Standard motors 60 Hz:1/4 H.P. 1 PH 60 Hz TEFC1725 RPM 56 C-Face115/208-230 Volt5 / 2.6 / 2.5 Ampor1/4 H.P. 3 PH 60 Hz TEFC1725 RPM 56 C-Face208-230/460 Volt1.4 / 1.3 / .65 AmpOptional 50 Hz motors:1/2 H.P. 1 PH 50 Hz TEFC1425 RPM 56 C-Face110/220 Volt7.2 / 3.6 Ampor1/2 H.P. 3 PH 50 Hz TEFC1425 RPM 56 C-Face220/380/440 Volts2 / 1.2 / 1 AmpOptional Explosion-Proof Motors 50 & 60 Hz:1/3 H.P. 1 PH 60 Hz EXP. 1725 RPM 56 C-Face115/208-230 Volt6 / 3.2 / 3 Amp1/3 H.P. 3 PH 60 Hz EXP. 1725 RPM 56 C-Face208-230/460 Volt1.8 / 1.6 / .8 Amp1/2 H.P. 3 PH 50 Hz EXP. 1425 RPM 56 C-Face220/380/440 Volt2 / 1.2 / 1 Amp1/2 H.P. 1 PH 50 Hz EXP. 1425 RPM 56 C-Face110/220 Volt7.2 / 3.6 AmpOptional 575 Volt Motors1/3 H.P. 3 PH 60 Hz TEFC1725 RPM 56 C-Face575 Volt.64 Amp1/2 H.P. 3 PH 60 Hz EXP. 1725 RPM 56 C-Face575 Volt.9 Amp1/2 H.P. 3PH 60 Hz TEFC1725 RPM 56 C-Face575 Volt.8 AmpKen Fagan02/12/98ABANAKIABANAKI CORPORATION 17387 Munn Road ChagrinPhone: 1-800-358-SKIMSpec:0404044-1 www.abaTote-It? Portable Oil Skimmer: 1", 2", 4"Quick Summary:A small rugged portable oil skimmer with a wide range of applications.The Tote-It is an industrial oil skimmer designed for years of continuousoperation. The Tote-It features: high oil removal capacity; dual wiperblade system; stabilizer bar; and a steel guard cover over the drivepulley. The Tote-It is currently found in such locations as parts washers,machine shops, assembly plants, automobile garages or any site that aunit can be carried to and plugged in. The Tote-It with 1, 2 and 4-inchbelt sizes allows for a variety of application possibilities. Highlights:1. A 1,2 or 4" continuous belt of corrosion resistant steel or elastomer. 2. Oil discharge is through a 1-1/4" N.P.T. coup3. 8 foot grounded power cord w/plug.4. Fan-cooled fractional horsepower gear motor5. Removes up to 12 gallons of oil per hour.6. Available in stainless steel construction.CAP.GAL. MODELBELTWIDTHBELTLENGTHRPMAMP3 TI-01 1"1'-6"to5'-0" 12 RP1.4 6 TI-02 2"1'-6"to5'-0"12 RP1.4 12 TI-04 4"1'-6"to5'-0"12 RP1.4 Note: Additional motors, including explosion proof, are availablcomplete listing of motors. Always consult the factory for Quick Chart:ling. © All rights reserved 2004 Falls, Ohio 44023 U.S.A. Fax: (440) 543-7404naki.com. SVOLTS Hz PHASE AM 11560Hz1PHTEFC11.21.3M 11560Hz1PHTEFC11.21.3M 11560Hz1PHTEFC11.21.3e per customer specification. See mspecial applications.STANDARD MOTOR RPMMPSVOLTSHz5/12.5/.61amp/.65amp115/230v110/220v50/60Hz5/12.5/.61amp/.65amp115/230v110/220v50/60Hz5/12.5/.61amp/.65amp115/230v110/220v50/60Hzotor spec sheet forOPTIONAL DUALVOLT MOTORABANAKI Tote-It? 1" Skimmer Specification SheetABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0404044-2 www.abanaki.comPART 1: GENERAL1.01 Construction1. Solid welded carbon steel with a baked on powdercoat finish.2. Color: Dark Safety Blue. 1.02 Pulley Types1. Drive Pulley (Head Pulley)A. Magnetic drive pulley for metal belt. Onemagnet assembly per cross bar, with 8 crossbars per unit.2. Tail Pulley (Solid drum type)A. With hub for elastomer belt.B. Without hub for metal belt.1.03 Motor 1. 115 Volt, 60Hz. @ 12 RPM 1.4 Amp shaded polegear motor, TEFC U.L. and C.S.A. approved.1.04 Guard1. Standard steel drive pulley area cover, bolt inplace.1.05 Belt Material and Length1. Standard Corrosion Resistant Steel Belt.2. Length 1'-6" to 5'-0" center-center1.06 Wiper Blades1. Standard Material: Nitrile. A. Adjustable wiper: outboard screw type fortensioning, with single wiper insert. B. Fixed: inboard to center belt, with single wiperinsert.1.07 Oil Discharge Outlet1. Dual troughs discharging into a single 1-1/4"N.P.T. coupling.1.08 Standard Mounting Arrangement1. Two 7/16" clearance holes for mounting on flatsurface.1.09 Weight and Size1. Weight of unit with gear motor is 22 lbs. for 1"unit.2. Overall size of unit: 12-7/8"L x 7-3/4"W x 12"H1.10 Mounting Requirements1. Sump Opening size for Tail Pulley: 4-1/2" x 5"w/stablizer bar.2. Minimum Mounting Height: 12"1.11 Power Requirements1. 3 - prong grounded 110 volt outlet. Unit comeswith 8' cord.1.12 Optional Mounting Arrangements1. Tote-It storage stand, for storing skimmer whilenot in use.2. Universal Mounting Stand: 48" tall, for mountingTote-It skimmer and ODM-100 decanter.3. Tote-It drum mount, for operating skimmer andone ODM-100 decanter on a 55 gallon drum.ABANAKI Tote-It? 2" Skimmer Specification SheetABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0404044-3 www.abanaki.comPART 1: GENERAL1.01 Construction1. Solid welded carbon steel with a baked on powdercoat finish.2. Color: Dark Safety Blue. 1.02 Pulley Types1. Drive Pulley (Head Pulley)A. Magnetic drive pulley for metal belt. Onemagnet assembly per cross bar with 8 crossbars per unit.2. Tail Pulley (Solid drum type)A. With hub for elastomer belt.B. Without hub for metal belt.1.03 Motor1. 115 Volt, 60Hz. @ 12 RPM 1.4 Amp shaded polegear motor, TEFC U.L. and C.S.A. approved.1.04 Guard1. Standard steel drive pulley area cover, bolt inplace.1.05 Belt Material and Length1. Standard Corrosion Resistant Steel Belt.2. Length 1'-6" to 5'-0" center-center1.06 Wiper Blades1. Standard Material: Nitrile.A. Adjustable wiper: outboard screw type fortensioning, with single wiper insert.B. Fixed: inboard to center belt, with singlewiper insert.1.07 Oil Discharge Outlet1. Dual troughs discharging into a single 1-1/4"N.P.T. coupling.1.08 Standard Mounting Arrangement1. Two 7/16" clearance holes for mounting on flatsurface.1.09 Weight and Size1. Weight of unit with gear motor is 34 lbs. for 2"unit.2. Overall size of unit: 12-7/8"L x 7-3/4"W x 12"H1.10 Mounting Requirements1. Sump Opening size for Tail Pulley: 4-1/2" x 5"w/stablizer bar.2. Minimum Mounting Height: 12"1.11 Power Requirements1. 3 - prong grounded 110 volt outlet. Unit comeswith 8' cord.1.12 Optional Mounting Arrangements1. Tote-It storage stand, for storing skimmer whilenot in use.2. Universal Mounting Stand: 48" tall, for mountingTote-It skimmer and ODM-100 decanter.3. Tote-It drum mount, for operating skimmer andone ODM-100 decanter on a 55 gallon drum.ABANAKI Tote-It? 4" Skimmer Specification SheetABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0404044-4 www.abanaki.comPART 1: GENERAL1.01 Construction1. Solid welded carbon steel with a baked on powdercoat finish.2. Color: Dark Safety Blue. 1.02 Pulley Types1. Drive Pulley (Head Pulley)A. Magnetic drive pulley for metal belt. Twomagnet assemblies per cross bar with 8 crossbars per unit.2. Tail Pulley (Solid drum type)A. With hub for elastomer belt.B. Without hub for metal belt.1.03 Motor1. 115 Volt, 60Hz. @ 12 RPM 1.4 Amp shaded polegear motor, TEFC U.L. and C.S.A. approved.1.04 Guard1. Standard steel drive pulley area cover, bolt inplace.1.05 Belt Material and Length1. Standard Corrosion Resistant Steel Belt.2. Length 1'-6" to 5'-0" center-center.1.06 Wiper Blades1. Standard Material: Nitrile. A. Adjustable wiper:outboard screw type fortensioning, with single wiper insert. B. Fixed: inboard to center belt, with single wiperinsert.1.07 Oil Discharge Outlet1. Dual troughs discharging into a single 1-1/4"N.P.T. coupling.1.08 Standard Mounting Arrangement1. Two 7/16" clearance holes for mounting on flatsurface.1.09 Weight and Size1. Weight of unit with gear motor is 34 lbs. for 4"unit.2. Overall size of unit: 14-7/8"L x 7-3/4"W x 12"H1.10 Mounting Requirements1. Sump Opening size for Tail Pulley: 5" x 7"w/stablizer bar.2. Minimum Mounting Height: 12"1.11 Power Requirements1. 3 - prong grounded 110 volt outlet. Unit comeswith 8' cord.1.12 Optional Mounting Arrangements1. Tote-It storage stand, for storing skimmer whilenot in use.2. Universal Mounting Stand: 48" tall, for mountingTote-It skimmer and OC-110 decanter.3. Tote-It drum mount, for operating skimmer andone OC-110 decanter on a 55 gallon drum.ABANAKI Electric Motor List Tote-It? Portables: 1", 2", 4" UnitsABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0404044-5 www.abanaki.comStandard gearmotor 60 Hz:1/20 H.P. 1 PH 60 Hz TEFC12 RPM 115 Volt1.4 AmpOptional 50Hz gearmotor:1/15 H.P. 1 PH 60/50 Hz TEFC15/12.5 RPM115/230v 110/220v1.3/.65 - 1.2/.61 AmpOptional Explosion-Proof Motors 50 & 60 Hz:Note: These are 56 C-Face motors1/3 H.P. 1 PH 60 Hz EXP. 1725 RPM 56 C-Face115/208-230 Volt6 / 3.2 / 3 Amp1/3 H.P. 3 PH 60 Hz EXP. 1725 RPM 56 C-Face208-230/460 Volt1.8 / 1.6 / .8 Amp1/2 H.P. 3 PH 50 Hz EXP. 1425 RPM 56 C-Face220/380/440 Volt2 / 1.2 / 1 Amp1/2 H.P. 1 PH 50 Hz EXP. 1425 RPM 56 C-Face110/220 Volt7.2 / 3.6 AmpOptional 575 Volt Motors1/3 H.P. 3 PH 60 Hz TEFC1725 RPM 56 C-Face575 Volt.64 Amp1/2 H.P. 3 PH 60Hz EXP. 1725 RPM 56 C-Face575 Volt.9 Amp1/2 H.P. 3PH 60Hz TEFC1725 RPM 56 C-Face575 Volt.8 AmpABANAKIABANAKI CORPORATION 17387 Munn Road ChagrinPhone: 1-800-358-SKIMSpec:0504045-1 www.abaPetroXtractor? Well Oil Skimmer: 1", 2", 4" Belts Quick Summary:For oil removal applications requiring access through a 2", 4" or 6" wellcasing, the PetroXtractor offers a versatile solution. Capable ofskimming hydrocarbon contaminants from your well, the PetroXtractorcan be configured for both a permanent or portable skimming system.With many available mounting arrangements, the PetroXtractor can bemounted nearly anywhere as a complete system or as a stand alone unit.For remote locations or special demands, alternative power requirementsand shelters are available. Also available, the PetroXtractor can bemounted underground in a manway, or above ground in a vapor tightenclosure.Highlights:1. The 1", 2" or 4" continuous belt is available lengths of up to 110 feet.2. Oil discharge is through a 1-1/4" N.P.T. cou3. Weighted P.V.C. tail pulley is designed to re4. Fan-cooled fractional horsepower gear moto5. A special non-abrasive, non-impact drive sylife.6. Choice of two different belt materials: LFO CAP.GAL. MODELBELTWIDTHBELTLENGTHRPMAMP3 PX-A 1"Up to100 ft.30 RP1.4A6 PX-B 2" Up to100 ft.30 RP1.4A12 PX-C 4" Up to100 ft.30 RP1.4ANotes: 1. Motors: Additional motors, including explosion proof, are availablemotors.2. Any listed motor may be used with adapter to gear reducer.3. Gear Reducers: Various ratios are available upon request, per custo4. Variable speed control: If air is available, it is the most practical & cprohibitive.5. Always consult the factory for special applications.Quick Chart: © All rights reserved 2004 Falls, Ohio 44023 U.S.A. Fax: (440) 543-7404naki.comin center to centerpling.tain belt.r.stem, which adds to belt“Fuzzy” and Poly.SVOLTS Hz PHASE MM 11560Hz 1 PHM 11560Hz 1 PHM 11560Hz 1 PH per customer specification. See motor specmer specification. Consult factory for moreost efficient. Variable speed electric's can STANDARD MOTORAIROTORD.C.MOTOROPT. OPT.OPT. OPT.OPT. OPT. sheet for complete listing of information.be furnished, but can be costOPTIONAL MOTORABANAKI PetroXtractor? PX-A Skimmer Specification SheetABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0504045-2 www.abanaki.comPART 1: GENERAL1.01 Construction1. Solid welded carbon steel with a baked on powdercoat finish. (except as specified below)2. Color: Dark Safety Blue.3. Optional: 316 Stainless Steel 1.02 Pulley Types1. Drive Pulley (Head Pulley)A. Head Pulley with nitrile lagging.B. Additional traction wheel with viton band.2. Tail PulleyA. P.V.C. housing and pulley; cage typehousing with weight per application.1.03 Motor1. 1/20H.P. 115 Volt, 60Hz. @ 30 RPM 1.4 Ampshaded pole gear motor, TEFC U.L. and C.S.A.approved.1.04 Guard1. Standard steel drive pulley area cover, bolt inplace.1.05 Belt Material and Length1. Standard Material (1" wide): choice of LFO“Fuzzy” or Poly.2. Length: As required up to 110'.1.06 Wiper Blades1. Standard Material: Hybrid.A. Adjustable wiper: screw type for tensioning,with single wiper insert.B. Fixed: in place to center belt, with singlewiper insert.1.07 Oil Discharge Outlet1. Dual troughs discharging into a single 1-1/4"N.P.T. coupling.1.08 Standard Mounting Arrangement1. Two 7/16" clearance holes for mounting on flatsurface.1.09 Weight and Size1. Weight of unit with gear motor is 34 lbs. for 1"unit.2. Overall size of unit: 11-3/8"L x 7-3/4"W x 12"H1.10 Mounting Requirements1. Pipe opening size for Tail Pulley: 2" well casing -minimum.2. Minimum Mounting Height: 12" from base to topof skimmer.1.11 Power Requirements1. 3 - prong grounded outlet. Unit comes with 8' cordfor standard motor configuration.2. Optional motors, e.g. explosion proof, are to behard wired.1.12 Optional Mounting Arrangements1. PetroXtractor Stand: 48" tall, for mounting anyskimmer, OC-110 Concentrator, and otheroptional equipment.2. Drum mount, for operating skimmer and one OC-110 Concentrator on a 55 gallon drum.3. Below grade mounting in manway.4. Vapor Tight Enclosure well skimmer system.ABANAKI PetroXtractor? PX-B Skimmer Specification SheetABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0504045-3 www.abanaki.comPART 1: GENERAL1.01 Construction1. Solid welded carbon steel with a baked on powdercoat finish. (except as specified below)2. Color: Dark Safety Blue.3. Optional: 316 Stainless Steel 1.02 Pulley Types1. Drive Pulley (Head Pulley)A. Head Pulley with nitrile lagging.B. Additional traction wheel with viton band.2. Tail PulleyA. P.V.C. housing and pulley; cage typehousing with weight per application.1.03 Motor1. 1/20 H.P. 115 Volt, 60Hz. @ 30 RPM 1.4 Ampshaded pole gear motor, TEFC U.L. and C.S.A.approved.1.04 Guard1. Standard steel drive pulley area cover, bolt inplace.1.05 Belt Material and Length1. Standard Material (2" wide): choice of LFO“Fuzzy” or Poly.2. Length: As required up to 110'.1.06 Wiper Blades1. Standard Material: Hybrid.A. Adjustable wiper: screw type for tensioning,with single wiper insert.B. Fixed: in place to center belt, with singlewiper insert.1.07 Oil Discharge Outlet1. Dual troughs discharging into a single 1-1/4"N.P.T. coupling.1.08 Standard Mounting Arrangement1. Two 7/16" clearance holes for mounting on flatsurface.1.09 Weight and Size1. Weight of unit with gear motor is 34 lbs. for 2"unit.2. Overall size of unit: 12-3/8"L x 7-3/4"W x 12"H1.10 Mounting Requirements1. Pipe opening size for Tail Pulley: 4" well casing -minimum.2. Minimum Mounting Height: 12" from base to topof skimmer.1.11 Power Requirements1. 3 - prong grounded outlet. Unit comes with 8' cordfor standard motor configuration.2. Optional motors, e.g. explosion proof, are to behard wired.1.12 Optional Mounting Arrangements1. PetroXtractor Stand: 48" tall, for mounting anyskimmer, OC-110 Concentrator, and otheroptional equipment.2. Drum mount, for operating skimmer and one OC-110 Concentrator on a 55 gallon drum.3. Below grade mounting in manway.4. Vapor Tight Enclosure well skimmer system.ABANAKI PetroXtractor? PX-C Skimmer Specification SheetABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0504045-4 www.abanaki.comPART 1: GENERAL1.01 Construction1. Solid welded carbon steel with a baked on powdercoat finish. (except as specified below)2. Color: Dark Safety Blue.3. Optional: 316 Stainless Steel 1.02 Pulley Types1. Drive Pulley (Head Pulley)A. Head Pulley with nitrile lagging.B. Additional traction wheel with viton band.2. Tail PulleyA. P.V.C. housing and pulley; cage typehousing with weight per application.1.03 Motor1. 1/20 H.P. 115 Volt, 60Hz. @ 30 RPM 1.4 Ampshaded pole gear motor, TEFC U.L. and C.S.A.approved.1.04 Guard1. Standard steel drive pulley area cover, bolt inplace.1.05 Belt Material and Length1. Standard Material (4" wide): choice of LFO“Fuzzy” or Poly.2. Length: As required up to 110'.1.06 Wiper Blades1. Standard Material: Hybrid.A. Adjustable wiper: screw type for tensioning,with single wiper insert.B. Fixed: in place to center belt, with singlewiper insert.1.07 Oil Discharge Outlet1. Dual troughs discharging into a single 1-1/4"N.P.T. coupling.1.08 Standard Mounting Arrangement1. Two 7/16" clearance holes for mounting on flatsurface.1.09 Weight and Size1. Weight of unit with gear motor is 36 lbs. for 4"unit.2. Overall size of unit: 14-3/8"L x 7-3/4"W x 12"H1.10 Mounting Requirements1. Pipe opening size for Tail Pulley: 6" well casing -minimum.2. Minimum Mounting Height: 12" from base to topof skimmer.1.11 Power Requirements1. 3 - prong grounded outlet. Unit comes with 8' cordfor standard motor configuration.2. Optional motors, e.g. explosion proof, are to behard wired.1.12 Optional Mounting Arrangements1. PetroXtractor Stand: 48" tall, for mounting anyskimmer, OC-110 Concentrator, and otheroptional equipment.2. Drum mount, for operating skimmer and one OC-110 Concentrator on a 55 gallon drum.3. Below grade mounting in manway.4. Vapor Tight Enclosure well skimmer system.ABANAKI Electric Motor List PetroXtractor?:1", 2", 4" Belt UnitsABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0504045-5 www.abanaki.comStandard gear motor 60 Hz:1/20 H.P. 1 PH 60 Hz TEFC30 RPM 115 Volt1.4 AmpOptional 50Hz gear motor:1/15 H.P. 1 PH 60/50 Hz TEFC15/12.5 RPM115/230 - 110/220 Volt1.3/.65 - 1.2/.61 AmpOptional Explosion-Proof Motors 50 & 60 Hz:Note: These are 56 C-Face motors1/3 H.P. 1 PH 60 Hz EXP. 1725 RPM 56 C-Face115/208-230 Volt6 / 3.2 / 3 Amp1/3 H.P. 3 PH 60 Hz EXP. 1725 RPM 56 C-Face208-230/460 Volt1.8 / 1.6 / .8 Amp1/2 H.P. 3 PH 50 Hz EXP. 1425 RPM 56 C-Face220/380/440 Volt2 / 1.2 / 1 Amp1/2 H.P. 1 PH 50 Hz EXP. 1425 RPM 56 C-Face110/220 Volt7.2 / 3.6 AmpOptional 575 Volt Motors1/3 H.P. 3 PH 60 Hz TEFC1725 RPM 56 C-Face575 Volt.64 Amp1/2 H.P. 3 PH 60Hz EXP. 1725 RPM 56 C-Face575 Volt.9 Amp1/2 H.P. 3PH 60Hz TEFC1725 RPM 56 C-Face575 Volt.8 Amp• Gear Reducers: Various ratios are available upon request, per customer specification. Consult factory for moreinformation. Some of the available ratios are 50:1, 75:1, 150:1, 300:1.MODEL PX-AMODEL PX-BMODEL PX-CKen Fagan01/01/02ABANAKIABANAKI CORPORATION 17387 Munn Road ChagrinPhone: 1-800-358-SKIMSpec:0604046-1 www.abaMighty Mini? Stainless Steel w/TimerPortable Oil Skimmer: 1", 2"Quick Summary:A low cost oil skimmer for light duty applications. The Mighty Minioffers features found on our larger models such as a dual wiper bladesystem and a self-tensioning pulley system along with four standardsizes. The Mighty Mini currently operates in the following types oflocations: production machines (CNC, lathes, milling operations); partswashers; marine craft (pleasure boats, tug boats); as well as on a 55-gallon drum.Highlights:1. A 1" or 2" continuous belt of corrosion resistant steel or elastomer.2. Oil discharge via a 3-foot 3/4-inch diameter clear plastic hose withclamp.3. 304 S.S. Glass Beaded Finish.4. 24 hour timer.5. 8-foot grounded power cord w/plug.6. Fractional fan-cooled gear motor.7. Removes one or two gallons of medium weCAP.GAL. MODELBELTWIDTHBELTLENGTHRPAM1 MM100ST-06 1" 6" 30 R1.5 -21 MM100ST-12 1" 12" 30 R1.5 - 1 MM100ST-18 1" 18" 30 R1.5 - 1 MM100ST-24 1" 24" 30 R1.5 - 2 MM200ST-06 2" 6"30 R1.5 -22 MM200ST-12 2" 12" 30 R1.5 - 2 MM200ST-18 2" 18" 30 R1.5 - 2 MM200ST-24 2" 24" 30 R1.5 - Quick Chart: © All rights reserved 2004 Falls, Ohio 44023 U.S.A. Fax: (440) 543-7404naki.comight oil per hour.MPSVOLTS Hz PHASEPM.0A11560Hz 1 PHPM2.0A11560Hz 1 PHPM2.0A11560Hz 1 PHPM2.0A11560Hz 1 PHPM.0A11560Hz1 PHPM2.0A11560Hz 1 PHPM2.0A11560Hz 1 PHPM2.0A11560Hz 1 PHSTANDARD MOTORRPMAMPSVOLTSHz30 RPM1.5 -2.0A26050Hz30 RPM1.5 - 2.0A26050Hz30 RPM1.5 - 2.0A26050Hz30 RPM1.5 - 2.0A26050Hz30 RPM1.5 -2.0A26050Hz30 RPM1.5 - 2.0A26050Hz30 RPM1.5 - 2.0A26050Hz30 RPM1.5 - 2.0A26050HzOPTIONAL MOTORABANAKI Stainless Steel Mighty Mini? 1" Skimmer Specification SheetABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0604046-2 www.abanaki.comPART 1: GENERAL1.01 Construction1. 304 Stainless Steel with glass beaded finish. 1.02 Pulley Types1. Drive Pulley (Head Pulley) A. Splined drive pulley for belt traction.2. Tail Pulley (Solid drum type) A. Spring loaded tension bar for automatictensioning on belt.1.03 Motor 1. Standard: 115 Volt, 60Hz. @ 30 RPM, fan cooledgear motor, U.L. and C.S.A. approved. A. Optional: 260 Volt, 50Hz. @ 30 RPM, fancooled gear motor, U.L. and C.S.A. approved.1.04 Guard1. Stainless Steel motor area cover, bolt in place withhandle.1.05 Belt Material and Length1. Corrosion Resistant Steel A. Lengths: 6", 12", 18", 24" - measured frommounting surface to bottom of tail pulley. B. Optional material: Elastomer, Poly, Poly-HT,and LFO “Fuzzy”.1.06 Wiper Blades1. Standard Material: Pretension Elastomer. A. Single wiper insert for front and rear wiper.1.07 Oil Discharge Outlet1. Dual troughs discharging into a trough outlet with3/4" dia. x 3' clear hose fastened with clamp.1.08 Standard Mounting Arrangement1. Two 5/16" x 1/2" slotted holes for mounting on flatsurface.1.09 Weight and Size1. Weight of unit with gear motor is 7 lbs. for 1" unit.2. Overall size of unit: 6.62"L x 6.31"W x 6.06"H1.10 Mounting Requirements1. Sump Opening size for Tail Pulley: 2" Dia.2. Minimum Mounting Height: 6.06"3. Overall Height (Unit + Belt length)(Top of handleto bottom of Tail Pulley) A. 6" belt - 12.06" total B. 12" belt - 18.06" total C. 18" belt - 24.06" total D. 24" belt - 30.06" total1.11 Power Requirements1. 3 - prong grounded 110 volt outlet. Unit comeswith 8' cord.1.12 Optional Mounting Arrangements1. Universal Mounting Bracket for mounting onstraight wall or 90° angle.2. ODM-100 Oil Concentrator Decanter mountingbracket for attaching ODM-100 to Mighty Miniskimmer's base.ABANAKI Stainless Steel Mighty Mini? 2" Skimmer Specification SheetABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0604046-3 www.abanaki.comPART 1: GENERAL1.01 Construction1. 304 Stainless Steel with glass beaded finish. 1.02 Pulley Types1. Drive Pulley (Head Pulley) A. Splined drive pulley for belt traction.2. Tail Pulley (Solid drum type) A. Spring loaded tension bar for automatictensioning on belt.1.03 Motor 1. Standard: 115 Volt, 60Hz. @ 30 RPM, fancooled gear motor, U.L. and C.S.A. approved. A. Optional: 260 Volt, 50Hz. @ 30 RPM, fancooled gear motor, U.L. and C.S.A.approved.1.04 Guard1. Stainless Steel motor area cover, bolt in placewith handle.1.05 Belt Material and Length1. Corrosion Resistant Steel A. Lengths: 6", 12", 18", 24" - measured frommounting surface to bottom of tail pulley. B. Optional material: Elastomer, Poly, Poly-HT, and LFO “Fuzzy”.1.06 Wiper Blades1. Standard Material: Pretension Elastomer. A. Single wiper insert for front and rear wiper.1.07 Oil Discharge Outlet1. Dual troughs discharging into a trough outletwith 3/4" dia. x 3' clear hose fastened withclamp.1.08 Standard Mounting Arrangement1. Two 5/16" x 1/2" slotted holes for mounting onflat surface.1.09 Weight and Size1. Weight of unit with gear motor is 7 lbs. for 2"unit.2. Overall size of unit: 7.75"L x 6.31"W x 6.06"H1.10 Mounting Requirements1. Sump Opening size for Tail Pulley: 2" x 3"2. Minimum Mounting Height: 6.06"3. Overall Height (Unit + Belt length)(Top ofhandle to bottom of Tail Pulley) A. 6" belt - 12.06" total B. 12" belt - 18.06" total C. 18" belt - 24.06" total D. 24" belt - 30.06" total1.11 Power Requirements1. 3 - prong grounded 110 volt outlet. Unit comeswith 8' cord.1.12 Optional Mounting Arrangements1. Universal Mounting Bracket for mounting onstraight wall or 90° angle.2. ODM-100 Oil Concentrator Decanter mountingbracket for attaching ODM-100 to Mighty Miniskimmer's base.ABANAKIABANAKI CORPORA17387 Munn Road CPhone: 1-800-35Spec:0704047-1 wwwGrease Grabber? Systems:Quick Summary:The Grease Grabber?,with its patented technology, wasdesigned and developed for the removal and discharge ofnon-flowing grease at ambient temperature. The mainfeature of this unit is a temperature controllehopper. The hopper is heated electrically to grease for discharge. Other features for handgrease are two grooved vulcanized rubber prrolls and a 4-inch SCH-40 discharge pipe noptional screw feed assembly is also availabthe heavy grease out of the heated dischargefeatures include: a totally enclosed drive meprotected by guards and a safety sensor switprevents accidental startup of the unit duringHighlights:1. An 8" continuous poly-belt up to 100 fe2. Dual safety covers for drive and motor 3. Safety sensor, which cuts power to motguard is removed.4. Dual wiper blade system5. Removes up to 160 gallons of heavy lubper hour.26. Electrically heated hopper.CAPGPH MODELBELTWIDTHBELTLENGTHRPMAMPS160 GR. 8 8" UP TO100 ft.1725 RP5/2.6/2Notes: 1. Additional motors, including explosion proof, are avalisting of motors. Always consult the factory for speci2. Actual removal rate will vary with application. Remoother components in ordinary water.Quick Chart:d dischargeflow heavyTION © All rights reserved 2004hagrin Falls, Ohio 44023 U.S.A.8-SKIM Fax: (440) 543-7404.abanaki.comling heavyessure driveipple. Anle to help pull pipe. Safetychanismch which maintenance.et or more.area.or when drivericating grease VOLTS Hz PHASEM.5115/208-23060Hz1 PHTEFC171.ilable per customer specification. See moal applications.val rate is based on Brooks Technology PSTANDARD MOTORRPMAMPSVOLTSHz25 RPM4/1.3/.65208-230/4603PH-60Hztor spec sheet for completelexelene 750TM grease andOPTIONAL MOTORABANAKI Grease Grabber?Standard Skimmer Specification SheetABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0704047-2 www.abanaki.com1.01 Construction1. Solid welded carbon steel with a baked on powdercoat finish.2. Color: Dark Safety Blue. 1.02 Pulley Types/Rolls1. Drive Rolls A. Dual grooved vulcanized rubber rolls w/1"shafts.2. Idler Pulley A. 3/4" shaft with dual bearing mount.3. Tail Pulley A. Standard yoke and chain assembly withretainer.1.03 Motor: 1/4 H.P. 1 PH 60Hz TEFC1725 RPM 56 C-Face115/208-230 Volt5 / 2.6 / 2.5 Ampsor optional1/4 H.P. 3 PH 60Hz TEFC1725 RPM 56 C-Face208-230/460 Volt1.4 / 1.3 / .65 Amprequires magnetic starter w/3 PH control panel1.04 Gear Reducer1. Standard Right Angle 56C-Face A. 60:1 reduction B. Oil filled C. Bronze gears/ball bearings1.05 Guards1. Standard steel motor area guard w/gas spring.2. Standard steel guard w/power cut-off switch overdrive rolls.1.06 Hopper1. Six 400watt electric heaters, thermostaticallycontrolled.1.07 Belt Material and Length1. Standard material: 8" wide Poly A. Optional material: Elastomer2. Length as required per application.1.08 Wiper Blades1. Standard Material: Hybrid Ceramic2. Top and bottom Wiper Assembly. A. Fixed wiper, with single insert, preset anglefor optimum wiping.1.09 Oil Discharge Outlet1. Double walled, thermostat controlled hopper with4" SCH-40 pipe nipple x 6" long for flange orcoupling mounting and/or discharge.1.10 Mounting Arrangements1. 2" steel angle frame 18" high for minimumclearance for flat surface mounting and shipping.1.11 Weights and Size1. Weight of skimmer without belt and tail pulley:240 lbs. (109kg) A. Skimmer has two lift hooks for lifting straps. B. Add 10 lbs. (4.5kg) for Tail Pulley weight.2. Overall size of unit: 31-1/2"L x 24"W x 14-3/16"H A. Does not include minimum mounting height.1.12 Mounting Requirements1. Sump Opening size for Tail Pulley: 12" x 24"2. Minimum Mounting Height will be determined byoil discharge requirements.1.13 Power Requirements1. 1 PH 110volt 60Hz2. 3 PH requires control panel. 1.14 Optional Mounting Arrangements1. Boom mast mount. A. New or existing 6" mast. B. Mast pivots for servicing.ABANAKI Grease Grabber?Skimmer Systems Specification SheetABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0704047-3 www.abanaki.comSystem A: Grease Grabber Mat Buster• Standard skimmer specifications• Mat Buster: 24", 36" or 44” dia. blades - requires additional tail pulley clearance requirements.• Mat Buster weight: 10lbs. (4.5 kg)• 24" blade - 18" x 28" clearance• 36" blade - 20" x 40" clearance• 44” blade - 20” x 44” clearanceSystem B: Grease Grabber Screw Feed Discharge• Standard skimmer specifications• Screw Feed Discharge• Motor - 1/4hp, 115/208-230VAC, 1PH, 60Hz., 5/2.6-2.5amps, 56C-face, TEFC, 1725RPM• Gear Reducer - 48:1 right angle• Auger - 4" right hand helical flighting welded to 1-1/4" sch-40 pipe.System C: Grease Grabber Transfer Package• Standard skimmer specifications• Transfer Package• Transfer Tank (volume user specified)• Transfer Tank Immersion Heater (sized to tank)• Hinged hood on tank for easy access.• Positive Displacement Pump• Transfer Tank Level ControlNote: All systems can be adapted to your application.ABANAKI Oil BossABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0804048-1 www.abanaki.comQuick Summary:A unit built to last. All stainless steel construction is built tostand up to the most punishing use and harshestenvironments without special maintenance orprotection.Controls and electrical connections are moistureresistant, and the sealed gearmotor is fully enclosedrequiring no maintenance. Applications include: nuclearpower plants and installations where food grade quality isnecessary.Highlights:1. A 4" continuous stainless steel or elastomer belt up to100 feet.2. One piece cover exposes entire mechanism forinspection.3. All stainless steel construction.4. Dual wiper blade system5. 115v plug-in and switch-on.Quick Chart: CAPGPH MODELBELTWIDTHBELTLENGTHRPMAMPSVOLTS Hz PHASERPMAMPSVOLTSHz12 Oil Boss 4" UP TO100 ft.12 RPM1.411560Hz1 PHTEFC15/12.51.2/.61amp1.3/.65amp115/230v110/220v50/60HzSTANDARD MOTOR OPTIONAL MOTORABANAKI Oil BossSpecification SheetABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0804048-2 www.abanaki.comPART 1: GENERAL1.01 Construction1. Stainless steel construction. 1.02 Pulley Types1. Drive Puley (Head Pulley) A. Magnetic drive pulley for metal belt.2. Tail Pulley A.Drum type w/yoke & chain.1.03 Motor: 1/20H.P. 1 PH 60Hz TEFC13.9 normal RPM/12 RPM at full load115 Volt1 amp normal/ 1.4 amp max.1.04 Guard1. Fully enclosed one piece stainless steel w/two easyopen positive locking latches.1.05 Belt Material and Length1. Standard material: Stainless Steel A. Optional material: Elastomer2. Length as required per application.1.06 Wiper Blades1. Standard Material: Nitrile or optional CRV.A. Fixed: with single wiper insert.B. Adjustable: with screw for tensioning,with single wiper insert.1.07 Oil Discharge Outlet1. Dual troughs discharging to a single 1-1/2" N.P.T.coupling.1.08 Standard Mounting Arrangement1. Four 7/16" clearance holes for flat surfacemounting.1.09 Weight and Size1. Weight of unit without belt and tail pulley: 50 lbs.2. Overall size of unit: 23"L x 12"W x 12"H1.10 Mounting Requirements1. Sump Opening size for Tail Pulley: 6" x 12"2. Minimum height needed from mounting surface tolift off cover: 21"1.11 Power Requirements1. 3-prong grounded 110v outlet. Unit comes with 8'cord.1.12 Optional Mounting Arrangement1. 4' stand w/angle plate brackets.Oil Skimming SystemOil Skimming SystemOFFONABANAKIABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:0904049-1 www.abanaki.comOil Concentrator?: ODM-100, OC-110, OC-200Quick Summary:The Abanaki Oil Concentrator? offers complete oil/water separation for reuse or disposal ofeither liquid. Mounted at the discharge end of the oil skimmer, the Oil Concentrator receives theskimmed liquid directly from the skimmer. Based on the principle of gravity separation, water isdecanted from the bottom, the lighter weight oil is removed from the top. Highlights:1. Non-electrical with no moving parts. 2. Sludge screen keeps large debris out of skimmed oil.3. Minimal maintenance.4. No skimmer modifications.5. Easy mounting.6. 3 sizes available.7. The OC-110 offers a channel mount for indoor or outdoor aplications, or a bracket mount foran open or sealed concentrator.Quick Chart:MODEL CAPACITY MATERIAL OPTIONALHEATEROPTIONALHOSE KITSKIMMERMODELODM-100 .56 gallons2.1 liters Fiberglass NO YESMighty Mini 1" & 2"Tote-It 1" & 2"OC-110 2.93 gallons11 litersSteel w/corrosion-resistant coating YES YESTote-It 4"PetroXtractor PX-A, PX-Band PX-CModel 4Model 82OC-200 16.87gallons63.8 litersSteel w/corrosion-resistant coating YES YES Multi-Belt UnitsABANAKIABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404www.abanaki.comMIGHTY-MINI WITHODM-100 OIL CONCENTRATORTOTE-IT WITHODM-100OIL CONCENTRATORABANAKIABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404www.abanaki.comMODEL 82 OIL SKIMMER WITHCHANNEL MOUNT OUTDOOROC-110 OIL CONCENTRATORABANAKIABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404www.abanaki.comMODEL 82 OIL SKIMMER WITHCHANNEL MOUNT INDOOROC-110 OIL CONCENTRATORKen Fagan05/13/97Ken Fagan07/24/97Ken Fagan07/24/97ABANAKIABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:10040410-1 www.abanaki.comQ-VAC? 100Quick Summary:The Abanaki Q-VAC 100 Pump is a wet suction unit intended for suction of non-dustingindustrial waste and is mounted directly on a standard barrel (bung barrel or ring lock barrel incold-rolled or stainless steel plate, volume 55, 30 or 16 gallons). It is important that the barrelused is in good condition. To eliminate the risk of the barrel being sucked in by the vacuumcreated, the barrel must not be damaged in any way. OptionalDrum DollyOptionalDrum Girdle2-way valvecompressed airconnection.Q-VACPumpOptionalDrum Cover90° angle withquick releaseconnection.SuctionHoseFloor attachmentwith rubber glides.Straight chromemetal handle.(1 of 2)Bent chromemetal handleStraight chromeMetal handle.(2 of 2)ABANAKIABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:11040411-1 www.abanaki.comMighty? Disk SkimmerQuick Summary:The inexpensive way to remove unwanted tramp oils from coolants and parts washers. Use italmost anywhere a flat surface is available for mounting. Weighs less than 10 pounds and installsin no time. Put it to work right out of the box, or add the optional coolant saving decanter for amore efficient skimming system.Highlights:1. Disk available in 12” and 18” diameters.2. 110v 60Hz. fan-cooled motor.3. High temperature disk material available. 4. Quality construction.5. Available in Stainless Steel with timer.6. Removes up to 1-1/2 gallons of medium weight oil per hour.Optional coolant saving decanter available.ABANAKIABANAKI CORPORATION © All rights reserved 200417387 Munn Road Chagrin Falls, Ohio 44023 U.S.A.Phone: 1-800-358-SKIM Fax: (440) 543-7404Spec:12040412-1 www.abanaki.comPlastic Disk SkimmerQuick Summary:The inexpensive way to remove unwanted tramp oils from coolants and parts washers. New,sturdy, all plastic construction. Use it almost anywhere a flat surface is available for mounting.Weighs less than 9 pounds and installs in no time. Put it to work right out of the box.Highlights:1. Disk available in 12” and 18” diameters.2. 110v 60Hz. fan-cooled motor.3. High temperature disk material available. 4. Quality all plastic construction.5. Removes up to 1-1/2 gallons of medium weight oil per hour. Table of Contents General Skimmer Information Skimmer Capacity Abanaki Belts Choosing the right belt material Belt Ordering Information Wiper Blade Material Types of Motors Oil Grabbers Tote-It Portable Mighty-Mini Grease Grabber PetroXtractor Mighty Disk Skimmer Optional Equipment Oil Grabber Model 8sq. Model 8sq. Specifications Belt Length Layout Drawing Oil Grabber Model 4 Model 4 Specifications Belt Length Layout Drawing Oil Grabber Multi Belts Multi Belt 2x8 Multi Belt 3x8 Multi Belt 5x8 Tote-It Portable Oil Skimmer Tote-It 1" Specifications Tote-It 2" Specifications Tote-It 4" Specifications Belt Length Layout Drawing PetroXtractor Well Oil Skimmer Model PX-A Specifications Model PX-B Specifications Model PX-C Specifications Belt Length Layout Drawing Mighty-Mini Portable Oil Skimmer Mighty-Mini 1" Specifications Mighty-Mini 2" Specifications Grease Grabber Systems Grease Grabber Standard Grease Grabber Systems Belt Length Layout Drawing Oil Boss Oil Boss Specifications Oil Concentrator Q-Vac 100 Mighty Disk Skimmer Plastic Disk Skimmer