Geo Products, L.L.C. - EnviroGrid Cellular Confinement (Geocell)
- Home
- Companies & Suppliers
- Geo Products, L.L.C. - EnviroGrid ...
- Downloads
- EnviroGrid - Paver Possesses Datasheet
EnviroGrid - Paver Possesses Datasheet
EnviroGrid® Paver The EnviroGrid Paver creates a porous stable surface that will help you comply with new stormwater management regulations. The use of the EnviroGrid Paver reduces runoff volumes and helps protect and conserve natural areasSection and cell size will change as each section is expanded to the required dimension. Section length can be incdecreased by adding or subtracting cells at no additional charge. Standard sections are manufactured from 58 strips of HDPE, resulting in a section length of 29 cells and 10 cells wstrip is the appropriate width and 82 inches (2.08m) in length. Weld spacing is 8.0 in ± .12 in (203 ± 3mm). MATERIAL PROPERTIES TEST METHOD UNIT TEST VALUMinimum Polymer Density ASTM D 1505 g/cm3 (lb/ft3) 0.940 (58.7)Environmental Stress Crack Resistance ASTM D 1693 hrs 3400 Carbon Black Content ASTM D 1603 % by weight 1.5% minimuNominal Sheet Thickness ASTM D 5199 mm (mils) 1.25 (50)±5% PHYSICAL PROPERTIES UNIT TYPICAL VALUE Nominal-Expanded Cell Size (width x length) mm (in) 146 (5.75) x 127 (5) Nominal-Expanded Cell Area cm2 (in2) 92.9 (14.4) Nominal-Expanded Section (width x length) m (ft) 1.46 (4.8) x 3.68 (12.08) Nominal-Expanded Section Area (width x length) M2 (ft2) 5.4 (58) Cell Depth mm (in) 50 (2.0) 75 (3.0) 100 (4.0) 125 (5Seam Peel Strength1 N (lbs) 710 (160) 1065 (240) 1420 (320) 1775 (4Flexural Strength -- 15 layers of a 102mm (4.0 in) perforated material shall be tested for fstrength (simply supported beam) per ASTM D 790 modified. MinimumFlexural Stiffness (EI) of 40,000 (lb-in2), cross-head speed 0.5, in/minPL3/48fc Section Weight Kg(lbs) 7.48 (16.5) 11.22 (24.75) 15 (33) 18.7 (41Sections per Pallet -- 100 60 50 40 Seam Hang Strength -- A 102mm (4.0in) weld joint supporting a load of 72.5 kg (160 lbs) for 3minimum or a 102mm (4.0in) weld joint supporting a load of 72.5 kg (160days minimum while undergoing temperature change from 23°C (74°F)(130°F) on a 1 hour cycle. 1 Seam Peel Strength per U.S. Army Corps of Engineers Technical Report GL-86-19, Appendix A 2 Licensed from the United States Army under Patent No. 4,797,026. GEO PRODUCTS, LLC 8615 Golden Spike Lane ? Houston, TX 77086 Phone: (281) 820-5493 ? Fax: (281) 820-5499 www.geoproducts.org This information is provided for reference purposes only and is not intended as a warranty or guarantee. Geo Products, LLC assumes no liconnection with the use of this information. Check with Geo Products, LLC for current, standard minimum quality assurance procedures. . reased or ide. Each E m .0) 00) lexural value , EI = .25) 0 days lbs) for 7 to 54°C 10/24/05ability in
Most popular related searches
