E.R.Technical Services Brochure

www.drainage-support.com 01704 512469Over the last few years the Drainage Industry hasundergone a number of changes, E.R.TechnicalServices has been established to assist itscustomers to react to these changes. Its FounderGraham Evans is building on his success withinthe E.R.Systems Group and developing thecustomer service and support angle to a newdimension. The services offered go further to assistcustomers to develop their own business withinour ever changing environment.Many contracts now require an array of requirementsthat are new to long established small drainagecompanies developing new markets , from methodstatements, risk assessments through to trainingcertificates, spec compliance documentation and morerecently Environmental and Carbon footprint policies.Many one off contracts also require specialist knowledge,equipment and on-site assistance. Contractors need to look to new areas to develop theirbusiness and be aware of the latest technology toenhance their services we at E.R.Technical Services areavailable to assist. E.R. Technical Services will continue to supply liningmaterials to customers from its new base in the NorthWest and will add the following enhanced technical supportservices to assist customers reacting to a changingmarket :New Solutions to Age Old Problems• Formal Certificated Training• Chemical Resistance & Material Selection• On Site Assistance• Specialist Equipment Hire• Specialist advise for Vinyl Ester resins• Specialist Ancillary equipment• Solution Management• Assistance with testing & methods of work• Product Development• Bespoke Renovation Solutions• Proactive new product ranges• Manhole Renovation solutionsFor further Informationcontact Graham on01704 512469www.drainage-support.comTrainingwww.drainage-support.com 01704 512469A Foundation Course in Cured In Place Lining(Ambient & Heat Assisted Cure) 2 Days?What’s Included?Background• To understand the purpose and limitations of CIPP lining• To Identify different Lining Carrier Materials and their selection [from a number of material suppliers]• To Identify different resin types and their selection [Polyester / Epoxy / Silicate]• To understand the differences between [Ambient / Heat Assisted Cure / Hot Cure]• An Introduction to testing and why liner thickness changesInstallation• Understand the importance of Impregnation [the minimum requirements to produce a good liner]• To Know the different installation techniques and identify best practice• To understand the handling and mixing of resins• To understand Health & Safety Risks During Site Operations• Liner Defects and identification of causeE.R.Technical Services [North West] Ltd are Approved to supply Training and technical Support forthe products supplied by :We believe that Training is far more than a couple of days in a classroom and apretty certificate. E.R.Technical Services [North West] Ltd have thereforepartnered with key industry suppliers to develop an Industry inclusive trainingprogram that is not system specific and has no sales agenda. By combining ourmanufacturer supported course with on site workshops we are able to offer acertificate that has credibility throughout the industry.Approved InstallerEco Hybrid ResinsAn exciting new Lining Material with incredible potential that has the advantagesof many of the existing resins in one easy to use product. This product has beenexclusively designed for us using advanced chemical techniques to our requiredcriteria and ticks all the boxes.We have Vinyl Ester available from stock toassist our customers react to the specificchemical resistance requirements of certainsites. A high grade Epoxy vinyl ester, whichcombines exceptional chemical resistance andan outstanding combination of heat resistanceand flexibility. The resin is resistant to manyalkaline media and hot water and offers goodperformance in contact with organic solvents.Our Product is 17% lower in reactive monomercontent than standard Isophalic resins.Epoxy Vinyl Ester is a widely excepted provenproduct that is not well known by smaller drainage contractors , partly because ofits specialist nature and partly because it is not stocked as a common product bysuppliers. As many contractors venture into new markets where chemical resistance and heatstability become more of an issue, Epoxy Vinyl Ester becomes a more versatilesolution.For advice or information on chemical resistance and the use of Epoxy Vinyl Ester just give us a call.Vinyl Ester ResinsResinswww.drainage-support.com 01704 512469Advantages • High Structural performance• Strength retention at High Temperatures• Established Corrosion Resistance Information• Good performance in Caustic Environments• Suitable where other resins are not• Ambient Cure or Heat Cure• No shrinkage• Minimal Smell• Solvent Free• BS-EN13556-4 & WIS 04-34-04 compliant• Uses existing catalyst systems• Installed using existing lining equipment• Pot life between 1Hr and 80Hrs• High Chemical Resistance• Sensibly PricedNewTop HatsA cost effective package toenable customers to successfullyinstall Top Hat repairs to defectiveconnections.E.R. Technical Services are constantly looking for new solutions for ourcustomers and have therefore sourced and introduced this proven system tothe UK.Top Hatswww.drainage-support.com 01704 512469Call GrahamTODAY tobook yourDemonstrationThese systems are available• To Purchase• To Hire• Or through our SpecialistInstallation Service.• The system is initiallyavailable in 150mm / 150mm &225mm / 150mm / 100mmranges however other sizes areavailable on request.• The Repair materials areavailable as a boxed kit foreach application.Many contractors use a number ofboiler models for variousapplications within the industry.Many of the available systems havelimited range in terms of pipediameter and length.Our new range includes the followingversatile options as well as bespokesteam generators for up to 450mmdiameter.Boilerswww.drainage-support.com 01704 512469Call GrahamTODAY tobook yourWorkshopSmall Boilerssuitable for Heat assisted cure ofpolyester resin and re-circulated hotcure of epoxy & BrawoRe-circulation pumps are aseparate itemSteam Hot Box Advanced development using highpressure pump technology enablesus to offer a small compact steamunit capable of heating lengths up to50m of 225mm using steamresulting in reduced cure times.Subjects Include :Installation of Patch Repairs.Mixing and impregnation of Hot Cure Liners.Epoxy Resin site installation.Use of Inversion Drums. Use of the RS Linergun.Leak sealing of Manholes and Chambers.Top Hat Installation.Using Boilers and re-circulation.“Premium”Boiler TechnologyOn Site Workshops?“Premium” Range Boilersincluding built in recirculation pump, dry running protection andaccessories Range [full hot cure]:• 50m of 225mm• 30m of 300mmIn addition to formal training we offer a range of Bespoke On-SiteWorkshops to assist site staff to observe best practise and develop confidencein a site environment.New for 2010www.drainage-support.com 01704 512469“In order to provide our customers with the ability to tackledifficult drainage problems we are continually searching for anddeveloping new solutions.”From January our proactiveproduct range will include:Brawo 3D – From Stock to enableour customers to carry out diameterchanges without compromising onliner thickness.Building on our success Introducing costeffective “Top Hat” repairs we will beintroducing a new system for 100mm pipesand connections.Multiple Bend Packers available in lengthsup to 2m to enable the contractor to installFlexible liners in difficult locations withminimal creasing. Also available are a number of new optionsfor roof gulleys.High Torque Branch Cutters.Twin mixing paddle mixers.ER Technical Servicessetting the standard by providing proactive solutionsCall GrahamTODAY for detailsof all our products& servicesNEWfor2010Service & Repairwww.drainage-support.com 01704 512469In line with our philosophy to introduce proactive products andservices to assist our customers, ER Technical Services are now ableto provide a Service & Repair facility for lining equipment, regardlessof manufacturer.In association with a number ofequipment suppliers and industrycontacts we are able to source orfabricate parts for many items oflining equipment.The key element for installing a quality liner, regardless of material supplier is impregnation. Manyliners are impregnated using a clumsy version of River Dance. The first step to improving the qualityof a liner is to ensure that the resin is distributed throughout the carrier in the correct quantity to givethe required cured density. This is achieved using avac and roller combination with a set roller gapdependent on the liner.ER Technical Services supply a range ofimpregnation equipment to suit our customersrequirements and are happy to demonstrate thequality improvements that are possible. Service & RepairImproving QualityCall GrahamTODAY for detailsof all our products& servicesEquipment is avaluable asset thathas no value if itdoesn't work”“