Evac Prestige Toilet - Technical Brochure

EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTECHNICAL DATADate: Doc.17 Sep 2009 001991-16543418 EVAC 910, WALL MODEL, PRESTIGE SILENT, WHITE6543419 EVAC 910, WALL MODEL, MOSAIK, WHITE* Prestige seat and cover fulfill ANSI Z124.5 - 1997 [Plastic Toilet ( Water closet ) Seats] requirements.** See available colours in document 002003-2Materials Bowl: White vitreous china**Seat; *Prestige: UF-S**, Mosaik: PP**Cover; *Prestige: UF-S **, Mosaik: PP**Pneumatic push button: White plastic, ABSDischarge valve; plastic parts: PP, rubber parts: NROperating data Water pressure: 3 - 10 barOperating vacuum: -0.3 ... - 0.6 barWater consumption: ~1.2 ±0.15 litres/flush ( water pressure: 4 bar, vacuum: -0.4 bar )Air consumption: ~60 ±10 litres/flush (normal atmospheric air)Connections Water supply: 1/2" MPT, flexible hoseDischarge: Discharge connection Ø50, connection sleeve includes two hose clampsto O.D. 48 - 52mm pipesShipping data P/N 6543418 Evac 910, wall model, Prestige Silent:Net weight: 20.8 kgShipping weight: 23.1 kgShipping volume: 0.168m3P/N 6543419 Evac 910, wall model, Mosaik:Net weight: 17.7 kgShipping weight: 19.7 kgWater supply 1/2”Shut-off valveVacuum breakerP/N 6541458 Pneumatic push button, whiteMax. 420230550Max. 45011036550430Seat and cover:Prestige* or MosaikBowlConnection sleeveDischarge connection250400Flexible waterconnection hose45Edge stripØ50EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTECHNICAL DATADate: Doc. 17 Sep 2009 001996-26543420 EVAC 910, WALL MODEL USPH, PRESTIGE SILENT, WHITE6543421 EVAC 910, WALL MODEL USPH, MOSAIK, WHITE6544766 EVAC 910, WALL MODEL USPH, OPEN FRONT, WHITEMaterials Bowl: White vitreous china**Seat; *Prestige: UF-S**, Mosaik: PP**, Open front: UF-S**Cover; *Prestige: UF-S**, Mosaik: PP**, Open front: UF-S**Pneumatic push button: White plastic, ABSDischarge valve; plastic parts: PP, rubber parts: NROperating data Water pressure: 3 - 10 barOperating vacuum: -0.3 ... - 0.6 barWater consumption: ~1.2 ±0.15 litres/flush ( water pressure: 4 bar, vacuum: -0.4 bar )Air consumption: ~ 60 ±10 litres/flush (normal atmospheric air)Connections Water supply with USPH: 1/2" MPT, flexible hoseDischarge: Discharge connection Ø50, connection sleeve includes two hose clampsto O.D. 48 - 52mm pipesShipping data P/N 6543420 EVAC 910, wall model USPH, Prestige Silent:Net weight: 21.6 ±0.5kgShipping weight: 25.1 ±0.5kgShipping volume: 0.168m3P/N 6543421 EVAC 910, wall model USPH, Mosaik:Net weight: 18.6 ±0.5kgShipping weight: 20.6 ±0.5kgShipping volume: 0.168m3P/N 6544766 EVAC 910, wall model USPH, Open front:Net weight: 20.4 ±0.5kgShipping weight: 22.9 ±0.5kgShipping volume: 0.168m3* Prestige seat and cover fulfill ANSI Z124.5 - 1997 [Plastic Toilet ( Water closet ) Seats] requirements.** See available colours on document 002003-2.P/N 6541458 Pneumatic push button, whiteMax. 420230550Max. 45011036550430Water supply 1/2”Shut-off valveEdge stripSeat and cover:Prestige*, Mosaik or Open frontBowlConnection sleeveDischargeconnection250400Flexible waterconnection hose45USPH vacuum breakerØ50EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTECHNICAL DATADate: Doc.Materials Bowl: White vitreous china *Seat; Silent: PP*, Aniara: PP*Cover; Silent: PP*, Aniara: PP*Pneumatic push button: PlasticDischarge valve: Plastic parts: PP, rubber parts: NROperating data Water pressure: 3 ...10 barOperating vacuum: -0.3 ... -0.5 barWater consumption: ~1.2 ±0.15 litres/flush ( water pressure: 4 bar, vacuum: -0.4 bar )Air consumption: ~ 60 ±10 litres/flush (normal atmospheric air)Connections Water supply: 1/2" MPT, flexible hoseDischarge: Rubber elbow 90°, two hose clamps are included in the rubber elbow 90° to O.D.48 - 52mm pipe.Shipping data P/N 6545825 EVAC 910, floor model, Silent:Net weight: 22.6 ±0.5kgShipping weight: 24.6 ±0.5kgShipping volume: 0.168m3P/N 6545826 EVAC 910, floor model, Aniara:Net weight: 20.7 ± 0.5kgShipping weight: 19.4 ±0.5kgShipping volume: 0.168m318 May 2009 002245-16545825 EVAC 910, FLOOR MODEL, SILENT (EVACINHUSH), WHITE6545826 EVAC 910, FLOOR MODEL, ANIARA, WHITE* See available colours indocument 002003-2150560Max. 465Max. 390195 90 150Dischargeconnection Ø50Rubberelbow 90°Water supply 1/2"Shut-off valveVacuum breakerSeat and cover,Silent or AniaraBowlFlexible waterconnection hoseØ10P/N 6544996 Pneumatic push buttonP/N 6541057 Optional pneumatic push button kit,wall installation, push button: white plastic Ø50EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTECHNICAL DATADate: Doc. 002246-118 May 20096545827 EVAC 910, FLOOR MODEL USPH, SILENT (EVACINHUSH), WHITE6545828 EVAC 910, FLOOR MODEL USPH, ANIARA, WHITE6545829 EVAC 910, FLOOR MODEL USPH, OPEN FRONT, WHITEMaterials Bowl: White vitreous china*Seat; Silent: PP*, Aniara: PP*, Open front: UF-S*Cover; Silent: PP*, Aniara: PP*, Open front: UF-S*Pneumatic push button: PlasticDischarge valve: Plastic parts: PP, rubber parts: NROperating data Water pressure: 3 ... 10 barOperating vacuum: -0.3 ... -0.50 barWater consumption: 1.2 ±0.15 litres/flush ( water pressure: 4 bar, vacuum: -0.4 bar )Air consumption: 60 ±10 litres/flush (normal atmospheric air)Connections Water supply: 1/2" MPT, flexible hoseDischarge: Rubber elbow 90°, two hose clamps are included in the rubber elbow 90° toO.D. 48-52mm pipe.Shipping data P/N 6545827 EVAC 910, floor model USPH, Silent:Net weight: 23.6 ±0.5kgShipping weight: 25.6 ±0.5kgShipping volume: 0.168m³P/N 6545828 EVAC 910, floor model USPH, Aniara:Net weight: 21.7 ±0.5kgShipping weight: 23.7 ±0.5kgShipping volume: 0.168m³P/N 6545829 EVAC 910, floor model USPH, Open front:Net weight: 23.6 ±0.5kgShipping weight: 25.6 ±0.5kgShipping volume: 0.168m³* See available colours ondocument 002003-2P/N 6544996 Pneumatic push buttonP/N 6541057 Optional pneumatic push button kit,wall installation, push button: white plastic150560Max. 465Max. 390195 90 150DischargeconnectionRubberelbow 90°Seat and cover,Silent, Aniara or Open frontBowlFlexible waterconnection hoseVacuum breakerUSPHWater supply 1/2"Cu-pipeØ12Ø10 Ø50Shut-off valveEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTECHNICAL DATADate: Doc.12 May 2008 1:01005F6541458 PNEUMATIC PUSH BUTTON, WHITEMaterials Cover: ABS, whiteButton: PBT, whiteBottom plate: POM, naturalConnections Hose nipple Ø4Shipping data Net weight: 0.2kg405817060Ø 4.5EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTECHNICAL DATADate: Doc. 18 May 2009 002247-16544996 PNEUMATIC PUSH BUTTON Pneumatic push buttonMaterials Push button: PlasticConnections Hose nipple Ø4/Ø2Shipping data Net weight: 0.05kgEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTECHNICAL DATADate: Doc. 31 Aug 2009 1:01197E6541057 OPTIONAL PNEUMATIC PUSH BUTTON KITMaterials Pneumatic push button, cover and button: White plasticCover plate: Nickel-plated brassProtecting pipe: White color PVCConnections Hose nipple Ø4/Ø2Shipping data Net weight: 0.2kgPneumatic push buttonCover plateProtecting pipeInstallation kitPneumatic pushbuttonØ10900Cover plateProtecting pipeEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTECHNICAL DATADate: Doc.06 Jul 2009 002003-5STANDARD COLOURS, EVAC 910, WALL MODELS AND FLOOR MODELSBowl, seat and cover are available in white and in standard colours. Standard colours are shown in the standardcolour palette. NOTE: Evac 910 vacuum toilets with the Mosaik, Aniara or Open front seats and covers are available only inwhite colour.When you order a toilet in standard colour you must give the toilet's part number, the name and the standardcolour code. Example: 6544794 Wall model USPH, Prestige Silent, 30 Light green. You can order the Prestige and the Silent seats and covers in additional colours only in large series. When youorder seat and cover in additional colours you must give an international colour code like the Muncell or RAL.01 White 10 Light grey 68 Pergamon,light beige30 Light greenStandard colour palette* COLOURS FOR WALL MODEL TOILETS Toilet bowl Seat and cover Product no. Toilet name Standard colour code Standard colour code Additional colours* min. 250 pcs/order min.1000 pcs/order min.1000 pcs/order6543418 Wall model, Prestige Silent 01 white 01 white X6543419 Wall model, Mosaik 01 white 01 white6543420 Wall model, USPH, Prestige Silent 01 white 01 white X6543421 Wall model, USPH, Mosaik 01 white 01 white6544766 Wall model, USPH, Open front 01 white 01 white6544791 Wall model, USPH, Prestige Silent, autoflush 01 white 01 white X 10 Light grey 10 Light grey6544792 Wall model, USPH, Prestige Silent, autoflush 30 Light green 30 Light green X 68 Pergamon, light beige 68 Pergamon, light beige 10 Light grey 10 Light grey6544793 Wall model, Prestige Silent 30 Light green 30 Light green X 68 Pergamon, light beige 68 Pergamon, light beige 10 Light grey 10 Light grey6544794 Wall model, USPH, Prestige Silent 30 Light green 30 Light green X 68 Pergamon, light beige 68 Pergamon, light beige6545030 Wall model, B15, Prestige Silent 01 white 01 white X6545031 Wall model, USPH, B15, Prestige Silent 01 white 01 white X6545818 Wall model, USPH, Prestige Silent, autoflush 01 white 01 white X 10 Light grey 10 Light grey6546081 Wall model, USPH, Prestige Silent, autoflush 30 Light green 30 Light green X 68 Pergamon, light beige 68 Pergamon, light beige COLOURS FOR FLOOR MODEL TOILETS Toilet bowl Seat and cover Product no. Toilet name Standard colour code Standard colour code Additional colours* min. 250 pcs/order min.1000 pcs/order min.1000 pcs/order6543422 Floor model, Silent 01 white 01 white X6543423 Floor model, Aniara 01 white 01 white6543424 Floor model, USPH, Silent 01 white 01 white X6543425 Floor model, USPH, Aniara 01 white 01 white6544797 Floor model, USPH, Open front 01 white 01 white6545825 Floor model, Silent 01 white 01 white X6545826 Floor model, Aniara 01 white 01 white6545827 Floor model, USPH, Silent 01 white 01 white X6545828 Floor model, USPH, Aniara 01 white 01 white6545829 Floor model, USPH, Open front 01 white 01 whiteEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.12 Jan 2009 001998-36543418 EVAC 910, WALL MODEL, PRESTIGE SILENT6543419 EVAC 910, WALL MODEL, MOSAIK220330140160220*(Water supply hose) NOTE: Recommended place for the button.If place is changed, consult EVAC.AAU-beam(Not included in EVAC supply)Fasten the beam to a solid structure.130P/N 5433572Straight connection hosePneumatic push button50Seat and cover:Prestige or Mosaik11045Ø50Shut-off valve1/2" MPTFlexible water hoseVacuum breakerDischarge pipealignment toleranceto be ±3.0 mmP/N 6544769Rubber elbow 90°, optional connection* The vacuum breaker air inlet must be located at a minimum of150mm (6") above the overflow point of the toilet.*150 NOTE: Overflow point is inside the toilet bowlOverflow pointVacuum breaker installation,see doc. 002017-1EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 2EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.12 Jan 2009 001998-36543418 EVAC 910, WALL MODEL, PRESTIGE SILENT6543419 EVAC 910, WALL MODEL, MOSAIKInstallation kit 6540972 consists of:Plastic nut M12 2 pcsGuiding nut 2 pcsEdge strip 1 pcMounting instruction 1 pcStraight connection hose 1 pcHose clamp 2 pcsToilet supporting beams for wall modelsCross section A - AEdge stripTotal length of bolt = T + 65 ± 2T 65±2Beam Toilet bowlBolt M12 (not EVAC supply) to be welded. NOTE: Thread on the bolt must be full length.Ø13230Dimensions of toilet service opening through the wall37021020090R20Bolt M12 to be welded(not EVAC supply)Length according tothe space available230220380200U-beam 50x30x2 (not EVAC supply)EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.12 May 2008 002017-16543418 EVAC 910, WALL MODEL, PRESTIGE SILENT6543419 EVAC 910, WALL MODEL, MOSAIK• Connect the water connection hose A to the water valve.• Install the back plate assembly on the wall using the bowl fastening bolts B (M12, not included) and the guidingnuts C (M12). The guiding nuts are necessary.• Connect the hose D from the flushing ring to the water valve. Do not use any kind of grease duringinstallation Secure with hose clamps. Tighten the hose clamps with pliers. NOTE: Install the hose D from the flushing ring in the toilet bowl to the right side of the discharge valve and belowall other hoses.• Lift bowl onto the fastening bolts and tighten the securing nuts E. Tightening torque is 15-20 Nm. NOTE: Check hoses through the toilet service opening in the wall that the hoses run smoothly. The hoses shallnot have any kinks.• Fit the edge strip as shown in figure 1. Place the joint of the strip to the bottom side of the bowl.• Install a seat and a cover. Look at The Prestige’s hinges installation in the picture above.• Connect the discharge connection. Secure with the hose clamps.• Connect the shut-off valve/vacuum breaker assembly to the water supply. The shut-off valve must be installed tothe water supply piping's side to ensure the correct flow direction in the vacuum breaker. Note that the vacuumbreaker must be installed vertically as shown.• Connect the water connection hose A to the shut-off valve/vacuum breaker assembly.• Install the pneumatic push button (See document 002002-1).EA, hose (EPDM) L=400,braid of stainless steel wireDWater valveBPneumatic push buttonEdge stripMosaikPrestigeFig.1CVacuum breakerShut-off valve,1/2” MPT BSPShut-off valve /vacuum breakerassemblyDischarge valve(See notes)HingeWasherNutHingebodyorPrestige’s hingesinstallationCorrect hinge installationFresh water connectionBack plateassemblyPipe Ø12EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.12 Jan 2009 002000-46543420 EVAC 910, WALL MODEL USPH, PRESTIGE SILENT6543421 EVAC 910, WALL MODEL USPH, MOSAIK6544766 EVAC 910, WALL MODEL USPH, OPEN FRONTOverflow point* The vacuum breaker air inlet must be located at a minimum of150mm (6") above the overflow point of the toilet.*15070 NOTE: Overflow point is inside the toilet bowl220 140160220(Water supply hose)AAU-beam(Not included in EVAC supply)Fasten the beam to a solid structure.130P/N 5433572Straight connection hosePneumatic push button50Seat and cover:Prestige, Mosaik orOpen front11045Shut-off valve1/2" MPTFlexible water hoseUSPH Vacuum breakerDischarge pipealignment toleranceto be ±3.0 mmP/N 6544769Rubber elbow 90°, optional connection*(USPH wall bracket)See also doc.002001-190Min. 280330 NOTE: Recommended place for the button.If place is changed, consult EVAC. Vacuum breaker installation,see doc. 002001-1Ø50EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 2EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.12 Jan 2009 002000-46543420 EVAC 910, WALL MODEL USPH, PRESTIGE SILENT6543421 EVAC 910, WALL MODEL USPH, MOSAIK6544766 EVAC 910, WALL MODEL USPH, OPEN FRONTInstallation kit 6540972 consists of:Plastic nut 2 pcsGuiding nut 2 pcsEdge strip 1 pcMounting instruction 1 pcStraight connection hose 1 pcHose clamp 2 pcsToilet supporting beams for wall modelsCross section A - AEdge stripTotal length of bolt = T + 65 ± 2T 65±2Beam Toilet bowlBolt M12 (not EVAC supply) to be welded. NOTE: Thread on the bolt must be full length.Bolt M12 to be welded(not EVAC supply)Length according tothe space available230220380200U-beam 50x30x2 (not EVAC supply)Ø13230Dimensions of toilet service opening through the wall37021020090R20EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.6543420 EVAC 910, WALL MODEL USPH, PRESTIGE SILENT6543421 EVAC 910, WALL MODEL USPH, MOSAIK6544766 EVAC 910, WALL MODEL USPH, OPEN FRONT18 Feb 2008 002001-1• Connect the water connection hose A to the water valve.• Install the backplate assembly on the wall using the bowl fastening bolts B (M12, not included) and the guidingnuts C (M12). The guiding nuts are necessary.• Connect the hose D from the flushing ring to the connecting nipple on the backplate (see drawing: Watersupply). Do not use any kind of grease during installation Secure with hose clamps. Tighten the hoseclamps with pliers. NOTE: Install the hose D to the right side of the discharge valve and below the hose F.• Lift bowl onto the fastening bolts and tighten the securing nuts E. Tightening torque is 15-20 Nm. NOTE: Check hoses through the toilet service opening in the wall that the hoses run smoothly. The hoses shallnot have any kinks.Nut EADWater valveBPneumatic push buttonorEdge strip MosaikPrestigeFig.1CShut-off valveFDischarge valve(See notes)HingebodyHingeWasherUSPH vacuum breaker(see drawing: Water supply)Open frontorBack plateassemblyEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 2EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.6543420 EVAC 910, WALL MODEL USPH, PRESTIGE SILENT6543421 EVAC 910, WALL MODEL USPH, MOSAIK6544766 EVAC 910, WALL MODEL USPH, OPEN FRONT18 Feb 2008 002001-1• Fit the edge strip as shown in the figure 1. Place the joint of the strip to the bottom side of the bowl.• Install a seat and a cover. See drawing: The Prestige’s hinges installation.• Connect the USPH vacuum breaker to the back plate's connecting nipples (see drawing: Water supply).• Fix the USPH vacuum breaker on the wall (see drawing: Water supply and see dimensionsfrom document 002000-2).• Connect the discharge connection. Secure with the hose clamps.• Connect the shut-off valve to the water supply. The shut-off valve must be installed to the water supply piping'sside to ensure the correct flow direction in the vacuum breaker. Note that the vacuum breaker must be installedvertically as shown.• Connect the water connection hose A to the shut-off valve.• Install the pneumatic push button (see document 002002-1).Prestige’s hinges installationCorrect hinge installationWater supplyBack plate assemblyHose (EPDM), L=500Hose (EPDM), L=810VacuumbreakerHose to the flushing ringin the toilet bowlWater valveFresh waterconnectionPipe Ø12Shut-off valve,1/2” MPT BSPHose (EPDM) L=400Braid of steinless steel wire NOTE: For non-U.S. flag vesselsEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.13 May 2009 002248-16545825 EVAC 910, FLOOR MODEL, SILENT (EVACINHUSH)6545826 EVAC 910, FLOOR MODEL, ANIARAOptional discharge connectionDischarge pipe alignment toleranceto be ± 3.0mm. P/N 5433572Straight connection15020Min.120* The vacuum breaker air inlet must be installed min.150mm (6”) above the overflow point of the toilet.OverflowpointØ 48-52390465225360°Min. 150*350195 90120380560Max.100Min.120Flexible water connection hoseShut-off valveVacuum breaker Pneumatic push buttonP/N 5610010Cover support(not included)Discharge pipealignment toleranceto be ± 3.0mmWater supply1/2" MPT150 510 ±10186EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 2EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.13 May 2009 002248-16545825 EVAC 910, FLOOR MODEL, SILENT (EVACINHUSH)6545826 EVAC 910, FLOOR MODEL, ANIARAFixing to the floor with a fixing plate and wood screws52 ± 2Welded bolt M8(not included)Installation kit P/N 5824900 consists of:Wood screw 5x45 2 pcsRubber elbow 1 pcHose clamp 2 pcsPlastic washer 2 pcsNut M8 2 pcsMounting instruction 1 pc20P/N 5779920 Fixing plate, plastic(not included)Max. 10Section ASection B180190~ 15A AOptional fixing points150195Optional fixing points170 B BFixing to the floor with welded boltsEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.13 May 2009 002249-26545827 EVAC 910, FLOOR MODEL USPH, SILENT (EVACINHUSH)6545828 EVAC 910, FLOOR MODEL USPH, ANIARA6545829 EVAC 910, FLOOR MODEL USPH, OPEN FRONTDischarge pipe alignment toleranceto be ± 3.0mm. P/N 5433572Straight connection15020Min.120350Min. 150*195Ø 48-5290120380390465360°560Max.100Min.120Flexible water connection hoseShut-off valveVacuum breakerUSPHPneumatic push buttonP/N 5610010Cover support(not included)Discharge pipealignment toleranceto be ± 3.0mmWater supply 1/2" MPT150Optional discharge connection510 ±10*The vacuum breaker air inlet must be installed min.150mm (6”) above the overflow point of the toilet.Overflowpoint225186EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 2EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.13 May 2009 002249-26545827 EVAC 910, FLOOR MODEL USPH, SILENT (EVACINHUSH)6545828 EVAC 910, FLOOR MODEL USPH, ANIARA6545829 EVAC 910, FLOOR MODEL USPH, OPEN FRONTFixing to the floor with a fixing plate and wood screwsInstallation kit P/N 5824900 consists of:Wood screw 5x45 2 pcsRubber elbow 1 pcHose clamp 2 pcsPlastic washer 2 pcsNut M8 2 pcsMounting instruction 1 pc20P/N 5779920 Fixing plate, plastic(not included)Max. 10Section A180190~ 15A AOptional fixing points52 ± 2Welded bolt M8(not included)Section B150195Optional fixing points170 B BFixing to the floor with welded boltsEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.6545825 EVAC 910, FLOOR MODEL, SILENT (EVACINHUSH)6545826 EVAC 910, FLOOR MODEL, ANIARA6545827 EVAC 910, FLOOR MODEL USPH, SILENT (EVACINHUSH)6545828 EVAC 910, FLOOR MODEL USPH, ANIARA6545829 EVAC 910, FLOOR MODEL USPH, OPEN FRONT13 May 2009 002250-1• Connect the water connection hose A to the water valve B.• Connect the pipes from the USPH vacuum breaker to the connecting nipples of the backplate. Note the correctflow direction (see water supply in the USPH models in the next page).• If you have an optional wall push button follow the installation instructions on the document 002002-1.• Lift the toilet bowl on it´s place, fix it on a floor using the screws/nuts and the washers. Use silicone compoundto seal joining between the bowl and the floor.• Connect the discharge connection. Secure with hose clamps.• Fix the USPH vacuum breaker on the wall (only in the USPH models).• Connect the shut-off valve/vacuum breaker assembly (the vacuum breaker assembly is not included in the USPHmodels) to the water supply. The shut-off valve must be installed to the water supply piping's side to ensure thecorrect flow direction in the vacuum breaker. Note that the vacuum breaker must be installed vertically as shown.• Connect the water connection hose A to the shut-off valve/vacuum breaker.• Install the seat and the cover.AShut-off valveBSilentAniaraVacuum breakerassembly(not in USPH models)orUSPH vacuum breaker(only in USPH models)ororOpen frontHingebodyWasherHingeDischarge connection pipeHose clampsWater supplyEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 2EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.6545825 EVAC 910, FLOOR MODEL, SILENT (EVACINHUSH)6545826 EVAC 910, FLOOR MODEL, ANIARA6545827 EVAC 910, FLOOR MODEL USPH, SILENT (EVACINHUSH)6545828 EVAC 910, FLOOR MODEL USPH, ANIARA6545829 EVAC 910, FLOOR MODEL USPH, OPEN FRONT13 May 2009 002250-1Shut-off valve 1/2” MPT BSPFresh water connection pipe, Ø12USPH vacuum breakerHose to flushing ring in bowlWater valveHose (EPDM), L=400,braid of stainless steel wireConnection nipple(from the USPH vacuum breaker)Connection nipples(to the USPH vacuumbreaker)Pipe Ø12 Cu(chromium plated)Water supply in the USPH modelsEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.15 Feb 2008 002002-16541458 PNEUMATIC PUSH BUTTON, EVAC 910, WALL MODELS6541057 OPTIONAL PNEUMATIC PUSH BUTTON KIT, EVAC 910, FLOOR MODELSInstalling the push button on the wall, floor models withthe optional push button kit.(Hose and protecting pipe on the surface of the wall)Control mechanism1. Drill Ø6 mm hole for the hose A.2. Connect the plastic hose A from the control mechanism tothe bellow B. Warm the end of the hose if needed to helpinstallation.3. Install the body C of push button on the wall using screws D(not included).4. Snap the cover E of the push button bellow in its place. NOTE: Secure, that the hose A is not flattened afterinstallation. Air impulse must always flow free.1. Thread the hose from the control mechanism through theprotection pipe A.2. Install the protection pipe A on the wall using screws andclamps B.3. Cut off the film of the bushing for the plastic hose in thebottom side of the push buttons cover.4. Connect plastic hose from the control mechanism to thebellow C. Snap the plastic hose on the clip behind thebottom plate.5. Install the push button body D to the wall using screws (notincluded).6. Snap the cover of the push button bellow E in its place.EØ 6A D3.CFrom the controlmechanism6060ABCDEBFrom the controlmechanismMake sure, that the plastic hose does not get loose from thecontrol mechanism.Plastic hose to thepush buttonControlmechanismEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 2EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.15 Feb 2008 002002-16541458 PNEUMATIC PUSH BUTTON, EVAC 910, WALL MODELS6541057 OPTIONAL PNEUMATIC PUSH BUTTON KIT, EVAC 910, FLOOR MODELSInstall the protecting pipe under the discharge pipe.Recommended place for the button NOTE: Make sure, that cover does not hit the push buttonwhen opened. (*In Aniara/Mosaik models dimension is 100mmsmaller due to the flexible cover.) If the place is changed,consult EVAC.Control mechanism~290330*130~640*110Optional push button(Floor models)Floor modelsOptional pneumatic push button kitDischarge pipeEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETOPERATION AND MAINTENANCEDate: Doc.04 Jun 2008 002029-26543418 EVAC 910, WALL MODEL, PRESTIGE SILENT, WHITE6543419 EVAC 910, WALL MODEL, MOSAIK, WHITE6543420 EVAC 910, WALL MODEL USPH, PRESTIGE SILENT, WHITE6543421 EVAC 910, WALL MODEL USPH, MOSAIK, WHITE6544766 EVAC 910, WALL MODEL USPH, OPEN FRONT, WHITEStart-up• Clean the bottom of the toilet bowl.• Check that the mini-check valve and the discharge valve are clean and working correctly.• Check that the water supply hose and the filter of the water valve are not blocked up.• Check that sufficient vacuum (-0.3 bar) is available.• Open the water supply valve in the water supply piping.• Press the toilet push button. Pressing the button starts the flushing sequence. The discharge valve opens andthe contents of the bowl are extracted by vacuum. At the same time the bowl is rinsed by water.• When the discharge valve has been closed water level is restored in the bowl by the closing time delay of thewater valve.Monitoring the vacuum toilet in the normal operation• Check that the water valve provides the rinse water to the bowl at the same time as the discharge valve extractsthe bowl contents when the push button is pressed.• Check that the push button returns to it´s non-activated state.• Check that after the discharge valve closes, the water valve continues to provide water to the bowl. If the watervalve time delay is correctly adjusted, there should be a pool of water at the bottom of the bowl.• Check that there are no water or air leaks. NOTE: Water consumption is dependent on the water supply pressure and the vacuum level.Preparation for a toilet not to be used for a long period• Close the water supply valve.• Run a flush cycle by pressing the push button.• Close the toilet seat cover.Water valveFlushing ringDischarge valvePush button on the wall(wall model toilets)ControlmechanismMini-checkvalveDirection ASeat coverFilter of thewater valveWater supply pipingWater supply valveAEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETOPERATION AND MAINTENANCEDate: Doc.04 Jun 2008 002028-26543418 EVAC 910, WALL MODEL, PRESTIGE SILENT, WHITE6543419 EVAC 910, WALL MODEL, MOSAIK, WHITE6543420 EVAC 910, WALL MODEL USPH, PRESTIGE SILENT, WHITE6543421 EVAC 910, WALL MODEL USPH, MOSAIK, WHITE6544766 EVAC 910, WALL MODEL USPH, OPEN FRONT, WHITEOperationThe toilet is flushed by pressing the push button. The pneumatic push button is connected to the control mechanismwith a control hose, which transports the air pulse from the push button to the control mechanism. The air pulse startsthe flushing sequence and the control mechanism connects vacuum to the control connections of the water valve andthe discharge valve. The water valve opens and lets rinsing water flow into the bowl through the flushing ring. After ashort delay vacuum acts in discharge valve housing and forces the rubber diaphragm in discharge valve to open.Contents of the bowl is drained to the vacuum sewer by a pressure difference between the bowl and vacuum sewer.The flushing cycle in the control mechanism starts the closing cycle. Vacuum enters to the relief valve. The relief valveopens the port between athmospheric air and the discharge valve. Athmospheric air enters to the discharge valve witchcloses immediatelly. After a short delay the atmospheric air pulse reaches to the water valve and the relief valve. Thewater valve closes and lets a certain level of water at the bottom in the bowl.After the flushing cycle has stopped the push button and the system will be ready for the next flush.Discharge valvePneumatic push buttonFlushing ringWater valveWater supplyconnectionControlmechanismControl hoseBowlRelief valveEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETOPERATION AND MAINTENANCEDate: Doc.18 May 2009 002251-16545825 EVAC 910, FLOOR MODEL, SILENT (EVACINHUSH)6545826 EVAC 910, FLOOR MODEL, ANIARA6545827 EVAC 910, FLOOR MODEL USPH, SILENT (EVACINHUSH)6545828 EVAC 910, FLOOR MODEL USPH, ANIARA6545829 EVAC 910, FLOOR MODEL USPH, OPEN FRONTStart-up• Clean the bottom of the toilet bowl.• Check that the mini-check valve and the discharge valve are clean and working correctly.• Check that the water supply hose and the filter of the water valve are not blocked up.• Check that sufficient vacuum (-0.3 bar) is available.• Open the water supply valve in the water supply piping.• Press the toilet push button. Pressing the button starts the flushing sequence. The discharge valve opens andthe contents of the bowl are extracted by vacuum. At the same time the bowl is rinsed by water.• When the discharge valve has been closed water level is restored in the bowl by the closing time delay of thewater valve.Monitoring the vacuum toilet in the normal operation• Check that the water valve provides the rinse water to the bowl at the same time as the discharge valve extractsthe bowl contents when the push button is pressed.• Check that the push button returns to it´s non-activated state.• Check that after the discharge valve closes, the water valve continues to provide water to the bowl. If the watervalve time delay is correctly adjusted, there should be a pool of water at the bottom of the bowl.• Check that there are no water or air leaks. NOTE: Water consumption is dependent on the water supply pressure and the vacuum level.Preparation for a toilet not to be used for a long period• Close the water supply valve.• Run a flush cycle by pressing the push button.• Close the toilet seat cover.Water valveDischarge valvePush buttonControlmechanismMini-checkvalveDirection ASeat coverFilter of the water valveWater supply pipingWater supply valveAEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETOPERATION AND MAINTENANCEDate: Doc.18 May 2009 002252-16545825 EVAC 910, FLOOR MODEL, SILENT (EVACINHUSH)6545826 EVAC 910, FLOOR MODEL, ANIARA6545827 EVAC 910, FLOOR MODEL USPH, SILENT (EVACINHUSH)6545828 EVAC 910, FLOOR MODEL USPH, ANIARA6545829 EVAC 910, FLOOR MODEL USPH, OPEN FRONTOperationThe toilet is flushed by pressing the push button. The pneumatic push button is connected to the control mechanismwith a control hose, which transports the air pulse from the push button to the control mechanism.The air pulse starts the flushing sequence and the control mechanism connects vacuum to the control connectionsof the water valve and the discharge valve. The water valve opens and lets rinsing water flow into the bowl through theflushing ring.After a short delay vacuum acts in discharge valve housing and forces the rubber diaphragm in discharge valve to open.Contents of the bowl is drained to the vacuum sewer by a pressure difference between the bowl and vacuum sewer.The flushing cycle in the control mechanism starts the closing cycle. Vacuum enters to the relief valve.The relief valve opens the port between athmospheric air and the discharge valve.Athmospheric air enters to the discharge valve witch closes immediatelly. After a short delay the atmospheric air pulsereaches to the water valve and the relief valve. The water valve closes and lets a certain level of water at the bottom inthe bowl. After the flushing cycle has stopped the push button and the system will be ready for the next flush.Discharge valvePneumatic push buttonFlushing ring Water valveWater supplyconnectionControlmechanismControlhoseBowlRelief valveEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETOPERATION AND MAINTENANCEDate: Doc.13 May 2008 002030-15775500 CONTROL MECHANISM, EVAC 910, WALL MODELS AND FLOOR MODELSDescription of the flushing sequenceIn the standby position FIG.1The control valve 1 is closed. Vacuum in the chambers 2 and3 is equalized by the jets 4 and 5. Force of the spring 6 holdsthe mechanism in a non-activated position.In the position immediately after the push button hasbeen pressed FIG.2Air pressure applied from the flush button to the chamber 7has lifted the lever 8 and opened control valve 1. Atmosphericair has entered chamber 3 through filter 9 and valve 1. Theforce from the pressure difference between 2 and 3 has movedthe shaft 10 to the left and the following sequence of eventshas occured:The inlet valve 11 has closed. Vacuum valve 12 has opened.Vacuum is distributed via check valve 13 to discharge valve18 and water valve 19 which will both open. Chamber 14 isalso subjected to vacuum through check valve 21.This vacuum will pull lever 8 and close valve 1 and the timerfunction will start. Chamber 3 will be evacuated through jet 5and the pressure difference 2-3 equalizes. At a certain level,the counterforce from spring 6 will outweigh and the cycle willgo in the opposite direction:The vacuum valve 12 will close. The air inlet valve 11 will openand vacuum will enter the relief valve 22, athmospheric airenters the water valve, the discharge valve and the chamber14. The discharge valve 18 will close and somewhat later(because of the jet 17), the water valve 19 closes when asuitable water level has been reached at the bottom of thebowl. The relief valve closes.Returning to the standby position FIG.3 The whole system goes to standby position ready for anotherVT-flush. NOTE: Diaphragm 16 has the same effective area as the airinlet valve 11 to balance the vacuum forces. FIG.3 NOTE: Check valve 13 ensures that connected valves inactivated position are unaffected by changes in the vacuumsupply level. NOTE: If vacuum is too low or absent the function is delayed.Control valve 1 stays open until chamber 14 is subject tovacuum.EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETOPERATION AND MAINTENANCEDate: Doc.13 May 2008 002032-15775500 CONTROL MECHANISM, EVAC 910 WALL MODELS AND FLOOR MODELSOperationThe functioning of the vacuum toilet is entirely controlled by the control mechanism. The operation of the controlmechnism is based on vacuum in the sewage piping system.Description of flushing sequence see document 002030-1.Jet 1 (document 002030-1 pos. 5) controls the discharge valve opening time.Jet 2 (document 002030-1 pos. 4) counters the effect of quick changes in the vacuum supply.Jet 3 (document 002030-1 pos. 15) delays the vacuum changes in the chamber 14 (see document 002030-1).Thisprevents a new flushing procedure to start before the previous procedure has stopped.MaintenanceMaintenanceMaintenanceMaintenanceMaintenanceCheck that the air filters 4 and 5 are not blocked.Check hoses and pipe connections for leaks.Toilet discharge timeJet 1 Short discharge period Red jet 1.5 sec.Normal discharge period Blue jet 2.0 sec.Longer discharge period White jet 2.5 sec.Less restriction shortens the timeWater valve opening timeJet 6 Normal bowl water level White jetLow bowl water level Blue jetPush buttonFilter 4Jet 1Jet 2Control mechanismJet 6(inside plastic cover)Water valveDischarge valveMini-check valveFilter 5(athmospheric air inlet for relief valve)Jet 3Control mechanismRelief valveEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETOPERATION AND MAINTENANCEDate: Doc.22 Oct 2008 002033-26543002 DISCHARGE VALVE, EVAC 910, WALL MODELS AND FLOOR MODELSOperationClosed condition:The control mechanism shuts off connection between the vacuum piping and the discharge valve housing. As thevalve housing is under atmospheric pressure the spring-loaded closing mechanism closes the rubber diaphragm andisolates the bowl from the vacuum piping.Open condition:As the control valve opens the discharge valve housing is subjected to vacuum, thus forcing the closing mechanismto open. This in turn allows the rubber diaphragm to open, and connects the bowl to the vacuum pipe line.Closing sequence:The vacuum pulse enters to the relief valve. The relief valve opens the port between athmospheric air and the dischargevalve. Athmospheric air enters to the discharge valve witch closes immediatelly. After a short delay the atmosphericair pulse reaches to the water valve and the relief valve. The water valve closes and lets a certain level of water at thebottom in the bowl.MaintenanceSee document 002034-1 for scheduled maintenance.CLOSEDCONDITIONClosingmechanismControl mechanismBowlsideVacuumpipingVacuum hoseConnectionpipeOPEN CONDITION CLOSING SEQUENCERubber diaphragmRubbersleeveRubbersleeveRelief valveDischargevalveDischarge valveAtmospheric airEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETMAINTENANCEDate: Doc.06 Jul 2009 002034-3EVAC 910, WALL MODELS AND FLOOR MODELSCleaning instruction for the seat• The seat is easy to clean, with just a few simple directions for you to observe.• Use a mild soap solution or biological cleaners.• Seat and hinges should not be left damp, but be dried with a soft cloth.• When using abrasive, corrosive or chlorine based cleaners for the bowl, avoid contact with the seat and hinges.Therefore, when cleaning the bowl, make sure that seat and cover are in an upright position until all the cleaner hasbeen flushed away.Scheduled maintenance programMaintenance Program is based on 20 toilet flushes per day and 20 years operation.Every year:• Change flap of Mini-check valve in every toilet.• Check operation, push button, seat and cover, rinse pattern, discharge pattern.• Check possible water and vacuum leakage.• Clean Filter ( not in USPH models ) in water supply.Every 5 years:• Change Flap of mini-check valve in every toilet.• Open and clean Water valve filter 5774150.• Clean Control mechanism air filter 5778600.• Check operation, push button, seat and cover, rinse pattern, discharge pattern.• Check possible water and vacuum leakage.• Check Flushing ring 6541025 or 6540968 and flushing operation.Every 10 years:• Change Flap of mini-check valve in every toilet.• Change Discharge valve rubbers: Rubber sleeve 6542990 (2pcs), Rubber diaphragm 6542989 and Diaphragm 6543134in relief valve.• Change Water valve diaphragm 5774400.• Open and clean Water valve filter 5774150.• Clean Control mechanism air filter 5778600.• Check operation, push button, seat and cover, rinse pattern, discharge pattern.• Check possible water and vacuum leakage.• Check Flushing ring 6541025 or 6540968 and flushing operation. NOTE: Use only genuine Evac spare parts.Discharge valve Water sypply Control mechanismFlushing ringFloor models:6541025 Flushing ringWall models:6540968 Flushing ring5778600Air filterWater valve5774400Diaphragm5774150Filter6541458Push button5860303Push buttonPneumatic push buttons6542990Rubbersleeve6542989RubberdiaphragmMini-checkvalveFilterRelief valve6544996Push buttonEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTROUBLE SHOOTINGDate: Doc.Filter ( not in USPH models )04 Jun 2008 002031-2EVAC 910, WALL MODELSPush buttonWater valveDischarge valveVacuumhoseControl mechanismMini-check valveFlushing ringShut-off valveSeal ( not in USPH models )Vacuum breakerWater supply hoseTroubleToilet is discharging continuously(discharge valve open)Bowl does not become emptywhen flushedNo water or too little rinsingwaterToilet is overflowingToilet does not flush.Cause• Foreign object in bowl orin discharge valve• Blocked air relief tubing• Quick relief valve malfunction• Discharge valve blocked• Leak in discharge valve housing• Discharge pipe blocked• Rubber sleeves leaking• Water shut-off valve closed• No water pressure• Filter full or dirt in water valve• Flush ring loose• Flush ring clogged• Filter blocked up in water supply• Water valve jammed in openposition• Bowl clogged or discharge valve notoperating• Misuse (buckets of water thrown inthe bowl)• Too low vacuum (less than 30%) toflush• No vacuum or low vacuum (lessthan 30kPa)• Clogged mini-check valve• No impulse from push button• Jammed control mechanism• Jammed quick relief valveRemedy• Shut off the problematic branch linevalve• Remove foreign object• Change discharge valve• Check and if necessary changecontrol mechanism• Check relief valve operation• Clear stoppage, if any, in dischargevalve• Sharp tools may damage rubber• Check that rubber sleeves areundamaged and correctly fitted• Check relief valve operation• Open valve• Provide water pressure• Clean filter• Connect flushing ring• Clean flushing ring• Clean filter• Close water shut-off valve• Clean / change water valve nozzles,springs, rubbers• Discharge bowl, valve and pipingwith normally flushing• Check vacuum level, removeblockage in piping• Clean / change mini-check valve• Check hoses andmembrane of pushbutton• Change control mechanism• Check air filter condition. It shouldbe place.• Check relief valve operationRelief valveEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTROUBLE SHOOTINGDate: Doc.06 Jun 2008 002050-1EVAC 910, FLOOR MODELSTroubleToilet is discharging continuously(discharge valve open)Bowl does not become emptywhen flushedNo water or too little rinsingwaterToilet is overflowingToilet does not flush.Cause• Foreign object in bowl orin discharge valve• Blocked air relief tubing• Quick relief valve malfunction• Discharge valve blocked• Leak in discharge valve housing• Discharge pipe blocked• Rubber sleeves leaking• Water shut-off valve closed• No water pressure• Filter full or dirt in water valve• Flush ring loose• Flush ring clogged• Filter blocked up in water supply• Water valve jammed in openposition• Bowl clogged or discharge valve notoperating• Misuse (buckets of water thrown inthe bowl)• Too low vacuum (less than 30%) toflush• No vacuum or low vacuum (lessthan 30kPa)• Clogged mini-check valve• No impulse from push button• Jammed control mechanism• Jammed quick relief valveRemedy• Shut off the problematic branch linevalve• Remove foreign object• Change discharge valve• Check and if necessary changecontrol mechanism• Check relief valve operation• Clear stoppage, if any, in dischargevalve• Sharp tools may damage rubber• Check that rubber sleeves areundamaged and correctly fitted• Check relief valve operation• Open valve• Provide water pressure• Clean filter• Connect flushing ring• Clean flushing ring• Clean filter• Close water shut-off valve• Clean / change water valve nozzles,springs, rubbers• Discharge bowl, valve and pipingwith normally flushing• Check vacuum level, removeblockage in piping• Clean / change mini-check valve• Check hoses andmembrane of pushbutton• Change control mechanism• Check air filter condition. It shouldbe place.• Check relief valve operationFilter ( not in USPH models )Push buttonWater valveDischarge valveVacuumhoseControl mechanismMini-check valveFlushing ringShut-off valveSeal ( not in USPH models )Vacuum breakerWater supply hoseRelief valveEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTROUBLE SHOOTINGDate: Doc.06 Jun 2008 002037-26543002 DISCHARGE VALVE, EVAC 910, WALL MODELS AND FLOOR MODELSRemoval of the discharge valve (wall models)1. Remove the bowl.2. Disconnect the rubber hose A from the water valveor from the connecting nipple (only in USPHmodels).3. Loose (only in USPH models) water valve from thecomponent plate.4. Disconnect the hose C with the elbow from therelief valve.5. Unscrew two screws**.Hose AWater valveHose BElbowConnectingnippleRelief valveHose CScrew**Fig. 1 Fig. 21. Disconnect the water supply hose from the watervalve and the discharge pipe from the backplate.2. Unscrew two screws* (see fig.2).3. Disconnect the rubber hose A from the water valveor from the hose nipple (only in USPH models).4. Loose (only in USPH models) water valve from thecomponent plate.5. Disconnect the hose from the relief valve.6. Unscrew two screws** (see fig.1).From the cabin side: From the service space side:Screws*WatervalveDischarge pipeWater supplyhoseBack plateRemoval of the discharge valve (floor models)Water supply valve Water hosePipesRubber bendScrews***Water valveConnection nipplesVacuum breaker(USPH models) Back plateVacuum breaker(not in USPH models)Discharge piping1. Close the water supply valve.2. Disconnect the water hose from the water valve.3. Disconnect the pipes of the vacuum breaker fromthe connection nipples4. Disconnect the toilet from the rubber bend.5. Remove the toilet if needed.6. Remove the screws***.7. Disconnect the rubber hose A from the water valveor the connecting nipple (only in the USPHmodels).8. Remove the back plate.ComponentplateDischarge valveEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 2EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTROUBLE SHOOTINGDate: Doc.06 Jun 2008 002037-26543002 DISCHARGE VALVE, EVAC 910, WALL MODELS AND FLOOR MODELSDismantling of the discharge valveRubber sleeveCoverSpringRubber sleeveCoverSpringPressPressDischarge valve bodyClosing mechanismRubber sleeve and braceFig. 3 Fig. 41. Remove the rubber sleeves, the covers and the springs.(see fig.3).2. Press lightly the closing mechanisms and remove therubber sleeve with the brace (see fig.4).9. Loose (only in the USPH models) water valvefrom the component plate.10. Disconnect the hose from the relief valve.11. Unscrew two screws*.Rubber hose A Connecting nipple(only in USPH models)Water valveComponentplateHose B(only in USPH models)ElbowHose CRelief valveScrews*Discharge valveEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.15 May 2008 002035-16543418 EVAC 910, WALL MODEL, PRESTIGE SILENT, WHITE6543419 EVAC 910, WALL MODEL, MOSAIK, WHITE NOTE: *When ordering:Toilet bowl - state type and standard colourSeat and cover - state type and standard colourP/N 6543418 includes Prestige seat and cover (P/N 6542928)P/N 6543419 includes Mosaik seat and cover (P/N 6540973)5432548Vacuum breaker5431884Shut-off valve6540936Edge strip5990759Nut (x2)5779098Guiding nut (x2)5433594Hose clamp (x2)5433572Connection sleeve6540972 INSTALLATION KIT6540967*Toilet bowl,includes flushing ring, springand hose clamp6540968Flushing ring5805900Hose to push button6541458Push button6542981Back plate assembly(document 002039-1)6540973*Seat and cover,Mosaik6542928*Seat and cover,Prestige6542402Hose clamp5432728Seal5980801WATER SUPPLY KIT5433215Water connectionhose with twoseals6542318Spring6543414FilterEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.6542318Spring NOTE: *When ordering:Toilet bowl - state type and standard colourSeat and cover - state type and standard colour05 Dec 2008 002040-16543420 EVAC 910, WALL MODEL USPH, PRESTIGE SILENT6543421 EVAC 910, WALL MODEL USPH, MOSAIK6544766 EVAC 910, WALL MODEL USPH, OPEN FRONTP/N 6543420 includes Prestige seat and cover (P/N 6542928)P/N 6543421 includes Mosaik seat and cover (P/N 6540973)P/N 6544766 includes Open front seat and cover (P/N 5441801)6540936Edge strip5990759Nut (x2)5779098Guiding nut (x2)5433594Hose clamp (x2)5433572Connection sleeve6540972 INSTALLATION KITConnectionhose withsealsShut-off valve6542928*Seat and cover,Prestige6541458Pneumatic push button6540973*Seat and cover,Mosaik654982Back plate( document 002039-3)6540968Flushingring5805900Hose to push button6540967*Toilet bowl,includes flushing ring, spring and hose clamp6542402Hose clampVacuumbreaker5441801*Seat and cover,Open front6541772WATER SUPPLY KIT(document 6:01024i)EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.21 Oct 2009 002266-16545825 EVAC 910, FLOOR MODEL, SILENT (EVACINHUSH)6545826 EVAC 910, FLOOR MODEL, ANIARA6541025Flushing ring6543060*Toilet bowl,includes flushing ring,spring and hose clamp5433215Water connectionhose with twoseals5432548Vacuumbreaker5431884Shut-off valve 5980801 WATER SUPPLY KIT5432728Seal6541922*Seat and cover, Silent(EvacInhush),(with metal hinges)5442101*Seat and cover, AniaraP/N 6545825 includes Silent (EvacInhush) seat and cover (P/N 6541922)P/N 6545826 includes Aniara seat and cover (P/N 5442101)5433266Wood screw5 x 45, (x2)or6542983Back plate(document 002043-2)6544996Pneumaticpush button6542402Hose clamp5433594Hose clamp (x2)6544769Rubber bend6544897INSTALLATION KIT5990724Nut M8, (x2)5825300Plastic washer, (x2)6542318Spring NOTE: *When ordering:Toilet bowl - state type and standard colourSeat and cover - state type and standard colour6543414FilterSee recommended spare part kits in spare part document:Doc no. 001923-1 Water valve6544898Plug2618192BoltP/N 6543422 is replaced by P/N 6545825P/N 6543423 is replaced by P/N 6545826EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.21 Oct 2009 002254-26545827 EVAC 910, FLOOR MODEL USPH, SILENT (EVACINHUSH)6545828 EVAC 910, FLOOR MODEL USPH, ANIARA6545829 EVAC 910, FLOOR MODEL USPH, OPEN FRONT6541922*Seat and cover,Silent(EvacInhush),with metal hinges6542984Back plate(document 002043-2)5980802WATER SUPPLY KIT( document 6:01024 i )VacuumbreakerUSPHConnectionhose withsealsShut-offvalve5433594Hose clamp6544769Rubber bend6544897INSTALLATION KIT5433266Wood screw5x45, (x2)5990724Nut M8, (x2)6541025Flushing ring5442101*Seat and cover,AniaraP/N 6543424 is replaced by P/N 6545827P/N 6543425 is replaced by P/N 6545828P/N 6544797 is replaced by P/N 6545829P/N 6543424 includes Silent (EvacInhush) seat and cover (P/N 6541922)P/N 6543425 includes Aniara seat and cover (P/N 5442101)P/N 6544797 includes Open front seat and cover (P/N 5441801)6544996Pneumatic push button6542402Hose clamp6543060Toilet bowl,includes flushing ring,spring and hose clamp5825300Plastic washer, (x2)or6542318Spring NOTE: *When ordering:Toilet bowl - state type and standard colourSeat and cover - state type and standard colour5441801Seat and cover,Open frontSee recommended part kitsin spare part document:Doc no. 001923-2 Water valve2618192Bolt6544898PlugEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.23 Oct 2009 002039-46542981 BACK PLATE ASSEMBLY, EVAC 910, WALL MODELS6542982 BACK PLATE ASSEMBLY, EVAC 910, WALL MODELS USPH5775500Control mechanismValve seatO-ringValve flap6545051VALVE STEM KIT6543072Back plate5736326Hose, L=2706543002Discharge valve5507000ElbowHose6542997Water valve5481004Hose, L=390(only in part 6542982)6542402Hose clamp(only in part 6542982)6545052MINI-CHECKVALVE KITHoseHoseNut and hose nipple(only in part 6542982)6542995Wall support,left and rightEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.17 Jul 2008 002043-26542983 BACK PLATE, EVAC 910, FLOOR MODELS6542984 BACK PLATE, EVAC 910, FLOOR MODELS USPH5775500Control mechanismValve seatO-ringValve flap6545051VALVE STEM KIT6543072Back plate(not including support plate)5736326Hose, L=2706543002Discharge valve5507000ElbowHose6542997Water valve5481004Hose, L=390(only in part 6542984)6542402Hose clamp(only in part 6542984)6545052MINI-CHECKVALVE KITHoseHoseNut and hose nipple(only in part 6542984)Support plateEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.28 Sep 2009 002038-26543002 DISCHARGE VALVE6543127Brace6545041Spare part kit6543133Air valve cover6543132Cover6544240Spring6542991Spring6542987Single yoke6542985Housing6542986Double yoke6542988Yoke cover6542991SpringEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.20 Oct 2009 001923-36542997 WATER VALVE6543030 RECOMMENDED SPARE PART KIT:1 x 3790009 V-ring1 x 5774150 Filter1 x 5774400 Diaphragm1 x 5774701 Valve washer + Jet5774400Diaphragm5774500Slider5774800Permanent magnet5522700Conic spring5774300Bottom5774150Filter6542998Solenoid valve3790009V-ring5990740Screw5774600Cover3752211O-ringValve washerJet5774701Valve washer + Jet6542826MembraneEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.08 Dec 2008 6:132 i5775500 CONTROL MECHANISM5881000 SPARE PART KIT FOR THE CONTROL MECHANISM5778000Jet carrier complete5778001Jet carrier complete5778001 Jet carrier complete (as standard), which controls flushing periodAlternative for this jet available:5778000 Jet carrier complete*5778002 Jet carrier complete*5778004 Jet carrier complete*5778600Air filter*Jet Carrier identification:P/N Colour Size Effect5778004 Yellow 0.20 Extra long flushing period5778000 White 0.30 Long flushing period5778001 Blue 0.40 Normal flushing period5778002 Red 0.50 Short flushing period NOTE: See also document 3:111 i, Control mechanism for Evac 900 model toilets.See also document 002032-1, Control mechanism for Evac 910 model toilets.P/N 5775500 Control mechanismP/N 5881000 Spare part kit for the control mechanism:P/N Description Pcs5778600 Air filter 15778001 Jet carrier complete 25778000 Jet carrier complete 15778700 Filter 15959902 Mini-check valve 1EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc. 01 Jan 2010 6:01122F6542928 PRESTIGE, SEAT AND COVER, EVACINHUSH FOR EVAC 900 AND 910 WALL MODEL TOILETS NOTE: Seat and cover sold as complete only.Prestige seat and cover fulfills ANSI Z124.5 - 1997 [ Plastic Toilet ( Water closet ) Seats ] requirements.6542950HINGE KIT6542951Clamping bush6545761Buffer for cover (x2)6545760Buffer for seat (x4)6545946StrapsEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.03 Apr 2008 6:01019E6540973 SEAT AND COVER, MOSAIK, EVAC 900 AND EVAC 910, WALL MODEL NOTE; When ordering: Seat and cover -state type and colour. NOTE: Seat and cover sold as complete only.2 x Hinge body2 x Nut6542726Hinge kitEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.14 Jul 2008 6:01021F5442101 SEAT AND COVER, ANIARA FOR EVAC 90 WALL AND FLOOR MODELS, EVAC 900 AND EVAC910 FLOOR MODELS NOTE: When ordering: Seat and cover -state type and colour. NOTE: Seat and cover sold as complete only.5442601 (x2)Hinge pin5442801Hinge body, left5442701Hinge body, right5445201 (x2)Nut6542732HINGE KITEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.14 Jul 20086541922 EVACINHUSH, SILENT SEAT AND COVER FOR EVAC 90 WALL AND FLOOR, EVAC 900 ANDEVAC 910 FLOOR MODELS5446401 (x2)Hinge pin6541241 (x2)Hinge5445201 (x2)Nut6540931 (x2)WasherP/N 5446101 is replaced by P/N 6541922. NOTE: Seat and cover sold as complete only. NOTE; When ordering: Seat and cover -state type and colour.6:01109CEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.11 Apr 2008 6:01024 i6541772 WATER SUPPLY KIT, USPH, FOR EVAC 900 AND EVAC 910 TOILETS, WALL MODELS5980802 WATER SUPPLY KIT, USPH, FOR EVAC 90, EVAC 900 AND EVAC 910 TOILETS, FLOOR MODELSP/N 6541772 Water supply kit, USPH5432548Vacuum breaker5433215Water connection hose(includes: 2 x seal )5431884Shut-off valve6541409 VACUUM BREAKER COMPLETE, USPH,WALL MODELP/N 5980802 Water supply kit, USPH5910601 (x2)Cu pipe Ø12x15431884Shut- off valve5430164Elbow5432548Vacuum breaker5430166Coupling G1/25432728Gasket5430166Coupling5957210Elbow wallfast flange5435336 VACUUM BREAKER ASSEMBLY, USPH5430166Coupling 5433215Water connection hose(includes: 2 x seal)5432728Seal5432728SealEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.20 Oct 2009 6:01012K6541458 PNEUMATIC PUSH BUTTON, EVAC 900 AND EVAC 910, WALL MODELS6541057 OPTIONAL PNEUMATIC PUSH BUTTON KIT, EVAC 900 AND EVAC 910, FLOOR MODELS5430105Installation kit5430108Protecting pipe6541458Pneumatic push buttonP/N 6541458 Pneumatic push buttonP/N 6541057 Optional pneumatic push button kit6543767Cover plate6541272Bellows6540932Spring6541457ButtonP/N 6540917 is replaced by P/N 6541458EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.18 May 2009 002255-16544996 PNEUMATIC PUSH BUTTON FOR EVAC 910 FLOOR MODELS6542438Button6544997Connection flange3510100Bellows complete6542449Locking ring