Evac Stainless Steel Vacuum Toilet - Technical Brochure

EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTECHNICAL DATADate: Doc. 16 Apr 2009 1:141J5327002 EVAC 90, STAINLESS STEEL, FLOOR MODEL, *SHOCK TESTEDMaterials Bowl: Stainless steel EN 1.4404Seat: White plastic laminated woodCover: White plastic laminated woodPneumatic push button: White plastic, ABSOperating data Water pressure: 200 ...1000kPaOperating vacuum: -30 ... -50kPaWater consumption: 1.2 ±0.15 litres/flush, ( water pressure: 400kPa, vacuum: -40kPa )Air consumption: 60 ±10 litres/flush (normal atmospheric air)Connections Water supply: 1/2” MPTDischarge: 90o rubber elbow to pipe size 48...52mm O.D.Shipping data Net weight: 20.2 ±0.5kgShipping weight: 22.2 ±0.5kgShipping volume: 0.168m³290270390~450Vacuum breaker390Shut-off valveFresh waterconnectionGasketFlexible water hosePneumatic push button5304 x Ø975200420525Dischargeconnection Ø50,turnable 360°90+2 0* Passed by the MIL-SPEC 901D (Navy) Grade B, Class 1, Type A shock test with addition: For passing the test the push button cover has to be fastened by means of self tapping screws. Screws do not include in the toilet assembly P/N 5327002. (See installation document 2:01015C)StrainerSeat and coverWater supply 1/2”EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTECHNICAL DATADate: Doc.16 Apr 2009 1:01191D6542534 EVAC 90, STAINLESS STEEL, FLOOR MODEL, SEAT WITHOUT COVER,* SHOCK TESTEDMaterials Bowl: Stainless steel EN 1.4404Seat: White plastic laminated woodPneumatic push button: White plastic, ABSOperating data Water pressure: 100 ...1000kPaOperating vacuum: -30... -50kPaWater consumption: ~1.2 litres/flushAir consumption: ~60 ±10 litres/flush (normal atmospheric air)Connections Water supply: 1/2” MPTDischarge: 90o rubber elbow to pipe size 48...52mm O.D.Shipping data Net weight: 18.4 ±0.5kgShipping weight: 20.4 ±0.5kgShipping volume: 0.168 m³* Passed with shock test requirements as per NES814, NES1004, DS28 Code “AB” (Captive)90270~420Vacuum breaker390Shut-off valveFresh waterGasketFlexible water hosePneumatic push button( See also installation of push buttonin shock tested toilet, doc 2:01015C )5304 x Ø975200420 Dischargeconnection Ø50,turnable 360°+2 0StrainerSeatWater supply connection 1/2”EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTECHNICAL DATADate: Doc. 31 Aug 2009 1:01017D5900204 PNEUMATIC PUSH BUTTON KITMaterials Pneumatic push button: White plastic, ABSProtecting pipe: PVCConnections Hose nipple Ø4/Ø2Shipping data Net weight: 0.2kg805080Pneumatic push buttonInstallation kitProtecting pipeØ10900EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.20 Apr 2009 2:01014F5327002 EVAC 90, STAINLESS STEEL, FLOOR MODEL, SHOCK TESTED6542534 EVAC 90, STAINLESS STEEL, FLOOR MODEL, SEAT WITHOUT COVER, SHOCK TESTEDInstallation kit P/N 5433243 consists of:Pneumatic push button 1 pcRubber bend 1 pcConnection hose 1 pcHose clamp 2 pcsWasher 4 pcsCap nut M8 4 pcsShut-off valve 1/2" 1 pcStrainer 1 pcVacuum breaker 1 pcMounting instruction 1 pcRubber plate 1 pcFixing to the deck with welded bolts Optional discharge connectionRubber plateSection AWelded bold M8(not included)5433572Connection hose802010Min. 120~120Shut-off valve 1/2" BSPVacuum breaker 1/2" BSPPneumatic push button(See installationdoc 2:01015C)2904 x Ø9690Flexible waterconnection 1/2" BSP530450360°180390Cover support(not included)Max. 100~55~45Min.120Ø48...5290140 NOTE: Recommended place for the push button.If the place is changed consult Evac.Seat and cover(for P/N 5327002)orSeat(for P/N 6542534)StrainerGasketEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETINSTALLATIONDate: Doc.25 Jan 2005 2:01015C5900204 PNEUMATIC PUSH BUTTONRemove the film out from the cover for protecting pipe.Put the slide guide tap to the groove on a cover.Snap the cover with the bellow on to the bottom plate.Recommended place for the pneumatic push button NOTE: Make sure, that cover does not hit the push buttonwhen opened. If the place is changed, consult EVAC.Controlmechanism640Slide guideGroovePneumatic push button installationInstall the plastic hose to the bellow.Put the plastic hose on clip behind the bottom plate.Install the pottom plate on the wall.5353 BellowPlastic hoseProtecting pipe ClampProtecting pipe installationThread the plastic hose through the protecting pipe.Install the protecting pipe under the discharge pipe.Install the protecting pipe using installation clamps andscrews.Protecting pipeDischarge pipeControlmechanismBottom plateCoverInstallation of pneumatic push button in shock testedtoilet NOTE: **Screws are needed only for a shock tested toiletinstallation. NOTE: *Holes are drilled when the pushbutton is installed.*Ø4.5*20*20*20*20*Ø4.5** Screws Ø4.2 x 50mmPush buttonEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETOPERATION AND MAINTENANCEDate: Doc. 20 Apr 2009 3:01010D5327002 EVAC 90, STAINLESS STEEL, FLOOR MODEL, SHOCK TESTED6542534 EVAC 90, STAINLESS STEEL, FLOOR MODEL, SEAT WITHOUT COVER, SHOCK TESTED5327004 EVAC 90, STAINLESS STEEL, FLOOR MODEL USPHStart-up• Clean the bottom of the toilet bowl.• Check that the mini-check valve and discharge valve are clean and working correctly.• Check that the water supply hose and the filter of water valve are not blocked.• Check that sufficient vacuum (-30kPa) is available.• Open the water supply valve in water supply piping.• Press the toilet push button: the discharge valve opens, the bowl contents are extracted and the bowl is rinsed withwater.• Once the discharge valve has closed, the water level is restored in the bowl from water valve with it´s closing timedelay.Monitoring the vacuum toilet in normal operation• Check that the water valve provides the rinse water to the bowl at the same time as the discharge valve extracts thebowl contents when the push button is pressed.• Check that the push button returns to it’s non-activated state.• Check that after the discharge valve closes, the water valve continues to provide water to the bowl. If the water valvetime delay is correctly adjusted, there should be a pool of water at the bottom of the bowl.• Check that there are no water or air leaks. NOTE: Water consumption is dependent on water supply pressure.Preparation for a toilet not to be used for a long period• Close the water supply valve.• Run a flush cycle by pressing the push button.• Close the toilet seat cover.WatervalveMini-check valve Discharge valvePneumaticpush buttonHose to thepneumatic pushbuttonSeat and coverorseatBowlDischargevalveWatervalveFilterRubberdiaphragmsWater supplyvalveEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETOPERATION AND MAINTENANCEDate: Doc.20 Apr 2009 3:01011E5327002 EVAC 90, STAINLESS STEEL, FLOOR MODEL, SHOCK TESTED6542534 EVAC 90, STAINLESS STEEL, FLOOR MODEL, SEAT WITHOUT COVER, SHOCK TESTED5327004 EVAC 90, STAINLESS STEEL, FLOOR MODEL USPHDischarge valvePneumatic push buttonFlushing ringWater valveWater supply connectionOperationThe toilet is flushed by pressing the push button. The pneumatic push button is connected to control mechanism witha control hose, which transports the air pulse from push button to control mechanism. The air pulse starts the flushingcycle and connects the vacuum to water valve and discharge valve.The water valve opens and lets rinsing water into the bowl through a flushing ring. After a short delay, the vacuum actsin discharge valve housing and forces the rubber diaphragm in discharge valve to open, thus connecting the bowl tovacuum sewer. The contents of bowl are forced into the vacuum sewer by a pressure difference between the bowl andvacuum sewer.The flushing cycle in the control mechanism starts the closing cycle. Athmospheric air pulse enters the dischargevalve, which closes. After a short delay, athmospheric air pulse reaches water valve, which closes and lets a certainlevel of water at the bottom in the bowl.After the flushing cycle has stopped, the push button and system will be ready for next flush.Control mechanismBowlEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETOPERATION AND MAINTENANCEDate: Doc.20 Apr 2009 3:01012D5775500 CONTROL MECHANISM, EVAC 90, STAINLESS STEEL, FLOOR MODELSDescription of flushing sequenceIn the standby position FIG.1Control valve 1 is closed. Vacuum in chambers 2 and 3 isequalized by the jets 4 and 5. Spring force 6 holds themechanism in the non-activated position.In the just switched position FIG.2Air pressure applied from the flush button to chamber 7 haslifted the lever 8 and opened control valve 1. Atmospheric airhas entered chamber 3 through filter 9 and valve 1. The forcefrom the pressure difference between 2 and 3 has moved theshaft 10 to the left and the following sequence of events hasoccured:The inlet valve 11 has closed. Vacuum valve 12 has opened.Vacuum is distributed via check valve 13 to discharge valve 18and water valve 19 which will both open. Chamber 14 is alsosubjected to vacuum through check valve 21.This vacuum will pull lever 8 and close valve 1 and the timerfunction will start. Chamber 3 will be evacuated through jet 5and the pressure difference 2-3 equalizes. At a certain level,the counterforce from spring 6 will outweigh and the cycle willgo in the opposite direction:The vacuum valve 12 will close. The air inlet valve 11 will openand atmospheric air enters discharge valve, water valve andchamber 14. The discharge valve 18 will close and somewhatlater (because of the jet 17), the water valve 19 closes when asuitable water level has been reached at the bottom of thebowl.Returning to standby position FIG. 3The whole system goes to standby position ready for anotherVT-flush. NOTE: Diaphragm 16 has the same effective area as the airinlet valve 11 to balance the vacuum forces. FIG.3 NOTE: Check valve 13 ensures that connected valves inactivated position are unaffected by changes in the vacuumsupply level. NOTE: If vacuum is too low or absent the function is delayed.Control valve 1 stays open until chamber 14 is subject tovacuum.EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETOPERATION AND MAINTENANCEDate: Doc.20 Apr 2009 3:01102B5775500 CONTROL MECHANISM, EVAC 90, STAINLESS STEEL, FLOOR MODELSOperationThe functioning of the vacuum toilet is entirely controlled by the control mechanism.Vacuum in the sewage piping system is the actuating medium.Description of flushing sequence see document 3:01012D.Jet 1 (document 3:01012D pos 5) controls the discharge valve opening time.Jet 2 (see document 3:01012D pos 4) counters the effect of quick changes in the vacuum supply.Jet 3 (document 3:01012D pos 15) delays the vacuum changes in chamber 14 (see document 3:01012D). Thisprevents a new flushing procedure to start before the previous procedure has stopped.MaintenanceCheck that the air filters 4 and 5 are not blocked.Check hoses and pipe connections for leaks.Toilet discharge timeJet 1 Short discharge period Red jet 1.5 sec.Normal discharge period Blue jet 2.0 sec.Longer discharge period White jet 2.5 sec.Less restriction shortens the timeWater valve opening timeJet 6 Normal bowl water level White jetLow bowl water level Blue jetPneumatic push buttonControl mechanismJet 6Water valveDischarge valveFilter 4 Filter 5 (Inlet for atmospheric air tothe discharge and the watervalve) Jet 3By-pass valveJet 2 Jet 1EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETOPERATION AND MAINTENANCEDate: Doc.20 Apr 2009 3:103D5435015 DISCHARGE VALVE, EVAC 90, STAINLESS STEEL, FLOOR MODELSOPENCLOSEDRubber sleeveBowl sideClosingmechanismRubberdiaphragmRubbersleeveVacuum pipingConnectionpipeVacuum hoseControl mechanismOperationClosed condition:In the closed position, the control valve shuts off the connection between the vacuum piping and the dischargevalve housing. As the valve housing then is under atmospheric pressure, the spring-loaded closing mechanismcloses the rubber diaphragm and isolates the bowl from the vacuum piping.Flushing condition:As the control valve opens, the discharge valve housing is subjected to vacuum, thus forcing the closingmechanism to open. This in turn allows the rubber diaphragm to open, and connects the bowl to the vacuum pipeline.MaintenanceSee document 3:01009H for scheduled maintenance.EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETOPERATION AND MAINTENANCEDate: Doc.20 Apr 2009 3:01009H5327002 EVAC 90, FLOOR MODEL, STAINLESS STEEL, SHOCK TESTED6542534 EVAC 90, FLOOR MODEL, STAINLESS STEEL, SEAT WITHOUT COVER, SHOCK TESTED5327004 EVAC 90, FLOOR MODEL, STAINLESS STEEL USPHCleaning instruction for the seat• The seat is easy to clean, with just a few simple directions for you to observe.• Use a mild soap solution or biological cleaners.• Seat and hinges should not be left damp, but be dried with a soft cloth.• When using abrasive, corrosive or chlorine based cleaners for the bowl, avoid contact with the seat and hinges.Therefore, when cleaning the bowl, make sure that seat and cover are in an upright position until all the cleanerhas been flushed away.Scheduled maintenance programEvery year:• Change mini-check valve 5959902 if toilet is connected to the riser pipe.• Check operation, push button, seat and cover, rinse pattern, discharge pattern.• Check possible water and vacuum leakage.• Clean strainer (not in USPH model) in water supply.Every 5 years:• Change mini-check valve 5959902 in every toilet.• Open and clean water valve filter 5774150.• Clean control mechanism air filter 5778600.• Check operation, push button, seat and cover, rinse pattern, discharge pattern.• Check possible water and vacuum leakage.• Check flushing ring 5433471 and flushing operation.Every 10 years:• Change mini-check valve 5959902 in every toilet.• Change discharge valve rubbers: rubber sleeve 5435181 (2pcs), rubber diaphragm 5435169.• Change water valve diaphragm 5774400.• Open and clean water valve filter 5774150.• Clean control mechanism air filter 5778600.• Check possible water and vacuum leakage.• Check flushing ring 5433471 and flushing operation. NOTE: Use only genuine Evac spare partsStrainer(not inUSPHmodel)Control mechanism Water valve5435169Rubberdiaphragm5435181Rubbersleeve5435181RubbersleeveDischarge valve5778600Air filter5774150Filter5433471Flushing ring5774400Diaphragm5900204Pneumatic pushbuttonWatersupply5959902Mini-checkvalveEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTROUBLE SHOOTINGDate: Doc. 20 Apr 2009 4:01003F5327002 EVAC 90, STAINLESS STEEL, FLOOR MODEL, SHOCK TESTED6542534 EVAC 90, STAINLESS STEEL, FLOOR MODEL, SEAT WITHOUT COVER, SHOCK TESTED5327004 EVAC 90, STAINLESS STEEL, FLOOR MODEL USPHTroubleToilet is dischargingcontineously (dischargevalve open)Bowl is not emptying, butwater run (high water inbowl)No water, but otherwiseflushing or too little rinsingwaterToilet is overflowingToilet does not flush.Cause• Foreign object in the bowl or in thedischarge valve• Blocked bowl• Blocked discharge valve• Loose / clogged hoses• Water shut-off valve closed• No water pressure• Filter in water valve full of dirt• Flushing ring loose• Flushing ring clogged• Strainer (not in USPH model) blocked up• Water valve jammed in open position• Bowl clogged or discharge valve notoperating• Misuse (buckets of water thrown in thebowl)• Too low vacuum (less than 30kPa) to flush• Too low vacuum (less than 30kPa)• Clogged mini-check valve• No impulse from flush knob• Jammed control mechanismRemedy• Shut off the problematic branch line valvehoses• Remove the foreign object• Change discharge valve• Check and if necessary change the controlmechanism.• Clean bowl• Clean discharge valve with by-pass• Check / connect hoses.• Open valve• Provide water pressure• Clean filter• Check / connect flushing ring• Clean flushing ring• Clean strainer• Close water shut-off valve• Clean / change water valve, nozzles,springs, rubbers• Clean bowl, check / replace dischargevalve• Discharge bowl, valve and pipingwith normally flushing• Check vacuum level, remove blockage inpiping• Check vacuum level, remove blockage inpiping• Clean / change mini-check valve• Check hoses and flush knob membrane• Change the control mechanismDischarge valvePneumatic push button Control mechanismFlushing ringWater connection hoseWatervalveFilterShut-off valveStrainer (not in USPH model)Vacuum breakerMini-check valveEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETTROUBLE SHOOTINGDate: Doc.12 Jan 2007 4:01004C5435015 DISCHARGE VALVE, EVAC 90, FLOOR MODELS, STAINLESS STEELThe triangle must face upwards and thetip of triangle must point towards thesewage piping.SewagepipingsideToiletbowlsideN.B When assembling, better sealing of rubber diaphragmis achieved if a screwdriver handle is inserted as shown.Also check that rubber diaphragm is in right position.(See picture above).Fig. 2Fig. 1 Fig. 4Fig. 3Rubber sleeveRubber sleeveRubber diaphragmLightlyspreadDismantling of the discharge valve:1. Compress the closing mechanism (Fig. 1).2. Remove the rubber diaphragm (Fig.2).3. Release the rubber sleeve; free and remove themechanism (Fig. 3).4. Unscrew the locking screws and take theassembly apart. Lightly spread upper pistonretainers to free lower piston (Fig. 4).TroubleBowl does not become emptywhen flushedCause• Discharge valve blocked• Leak in discharge valve housing• Discharge pipe clogged• Rubber sleeves leakingRemedy• Clear stoppage, if any, in discharge valve• Sharp tools may damage rubber• Check that rubber sleeves areundamaged and correctly fittedEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc. 10 Dec 2009 6:150 J5327002 EVAC 90, FLOOR MODEL, STAINLESS STEEL, SHOCK TESTED6542534 EVAC 90, FLOOR MODEL, STAINLESS STEEL, SEAT WITHOUT COVER, SHOCK TESTED5900204Pneumatic push button(See doc 6:159E)5431884Shut-off valve5432548Vacuum breaker5778995Connection hose5805900Hose5430318Screw5432728Gasket5434203Hinge5434483Washer5441201Seat and cover with hinges(in P/N 5327002)6542702Seat with hinges(in P/N 6542534)5327031Toilet bowl(in P/N 5327002)6542701Toilet bowl(in P/N 6542534)5433471Flushing ring2715210Nut5433244Rubber plate5430225Fastening rod5433358O-ring5778991Nipple5435331Console5610202Flush unit(See doc 6:152D)5481006Hose5433572Straight connection5433594Hose clamp5434552Wing nut5433583Rubber elbow5328200Cover platecomplete5328220Lock plate5328210Cover plate2618001Screw2722008Washer6541056Outlet pipe5434519Fastening plate2716103Nut2677175Screw5435015Discharge valve(document 6:110F)6543414FilterSee recommended spare part kitsin documents:Doc no 6:110F Discharge valveDoc no 6:131H Water valve5980800WATER SUPPLY KITEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.16 Dec 20085435014 DISCHARGE VALVE5435015 DISCHARGE VALVEP/N 43501.3 and P/N 5435013 are replaced by P/N 5435014P/N 5435015 Discharge valve (see drawing below).P/N 5435014 Discharge valve includes Discharge valve P/N 5435015 + Hose (L=210mm) P/N 5736314.5435137Closing mechanism(sold only as a kit)5435169Rubber diaphragm5435181Rubber sleeve5435181Rubber sleeve5435069HousingVacuumconnectionnipple6:110F6543029 RECOMMENDED SPARE PART KIT:1 x 5435169 Rubber diaphragm2 x 5435181 Rubber sleeveRECOMMENDEDSPARE PART KIT(only for toilets):P/N 6544681EvacInflux silent kit(only in P/N 5435015)(doc. 002169-1)5736314Hose (only in P/N 5435014)EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.12 Jan 2007 6:152D5610202 FLUSH UNIT, EVAC 90, FLOOR MODELS, STAINLESS STEEL5774000Water valve5778994Console5775500VT-control5472708Screw5433278Vacuum hose withcheck valve5481102Hose5433277Hose + elbow5990760Hose clip5805900Hose to push buttonEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.31 Jul 2008 6:131H5774000 WATER VALVEV-ring5774100Solenoid valve5990740Screw5774600Cover3752211O-ringJetValve washer5774200Fixing bracket5522700Conic spring5774300Bottom5774800Permanent magnet5774500SliderDiaphragmFilterValve washer + Jet6543030 RECOMMENDED SPARE PART KIT:1 x 3790009 V-ring1 x 5774150 Filter1 x 5774400 Diaphragm1 x 5774701 Valve washer + JetEVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.08 Dec 2008 6:132 i5775500 CONTROL MECHANISM5881000 SPARE PART KIT FOR THE CONTROL MECHANISM5778000Jet carrier complete5778001Jet carrier complete5778001 Jet carrier complete (as standard), which controls flushing periodAlternative for this jet available:5778000 Jet carrier complete*5778002 Jet carrier complete*5778004 Jet carrier complete*5778600Air filter*Jet Carrier identification:P/N Colour Size Effect5778004 Yellow 0.20 Extra long flushing period5778000 White 0.30 Long flushing period5778001 Blue 0.40 Normal flushing period5778002 Red 0.50 Short flushing period NOTE: See also document 3:111 i, Control mechanism for Evac 900 model toilets.See also document 002032-1, Control mechanism for Evac 910 model toilets.P/N 5775500 Control mechanismP/N 5881000 Spare part kit for the control mechanism:P/N Description Pcs5778600 Air filter 15778001 Jet carrier complete 25778000 Jet carrier complete 15778700 Filter 15959902 Mini-check valve 1EVAC reserves the right to make alterations to this specification without prior notice.© Copyright Evac Oy. All rights reserved. 1EVACCommercial Marine EquipmentVVVVVAAAAACUUM CUUM CUUM CUUM CUUM TTTTTOILETOILETOILETOILETOILETSPARE PARTSDate: Doc.12 Jan 2007 6:159E5900204 PNEUMATIC PUSH BUTTON, EVAC 90, FLOOR MODELS, STAINLESS STEEL5900200Push button, complete5430105Installation kit5430108Protecting pipe3510100Bellow