FFT-Solution® Petroleum Remediation Product Line

FFT-SOLUTION®Petroleum Remediation Product LineFOG Free Technologies4365 Dorchester RoadBldg. 300, Suite 301North Charleston, SC 29405(843) 735-6626www.fogfreetechnologies.com Fog Free Technologies Petroleum Remediation Products FFT-Solution® Nontoxic Oil Dispersant Listed on the EPA NCP Product Schedule FFC-500LF™ Low foaming oily water decontamination chemical treatment FFT Petroleum Cleaning Agent Concentrated cleaner for equipment degreasing and parts cleaning during maintenance FFT Sediment Treatment Agent Contaminated soil remediation FFT Rig Wash Surface cleaning agent for oil rig work areas FFT Rig Wash 51 Ready-to-use surface cleaning agent for oil rig work areas FFT Laundry Cleaner Speci?cally designed for ?re retardant industrial work clothing used by workers in petroleum laundry operations. FFT Power Powder Detergent Speci?cally designed for ?re retardant industrial work clothing used by workers in petroleum laundry operations. Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT Power Powder DetergentEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company Identification Product Name: FFT Power Powder DetergentChemical Use: Powdered Laundry DetergentChemical Family: Coupling Blend MSDS Issue Date: April 30, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFT Power Powder Detergent is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT Power Powder.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 Solubility in Water: Completely Vapor Pressure: < 0.01 Torr @ 15°C pH: 7-8.1Appearance: White Powder Odor: Fresh ScentSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.FFT-SOLUTION®Petroleum Remediation Product Line Executive Summary of FFT ProductsFFT-SOLUTION® products are nontoxic and represent the next generation of green petroleum remediation and cleaning agents. The development of six top-tier products to handle petroleum contamination issues ranging from oil spills to oily water remediation allow petroleum industry companies to solve contamination problems efficiently and cleanly. Summarizing major points, FFT-SOLUTION® products:• are pH neutral and nontoxic when used as directed• are highly efficient and rapidly create nanoscale micelles thatenhance bioavailability of hydrocarbons• remediate petroleum pollution in many ecosystems ranging fromopen oceans to uplands, marshes, swamps, and wetlands• are currently used in major petroleum industry applicationsincluding decontamination and cleaning of work clothing madefrom fire retardant materialsAll FFT-SOLUTION® products are application safe and nontoxic. This is a welcome change for workers using these products on a daily basis. Industry standard application methods are used. FFT staff and its trained professional engineering distributors provide advice and assistance.The use of FFT-SOLUTION® products to eliminate all forms of hydrocarbon pollution in both aqueous and terrestrial contamination environments in time frames of less than a week is a demonstrated fact. Assuming mobilization costs are the same, if you could choose a product that takes a week to work or a product that takes months to work, which would you pick? Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT Power Powder DetergentEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company Identification Product Name: FFT Power Powder DetergentChemical Use: Powdered Laundry DetergentChemical Family: Coupling Blend MSDS Issue Date: April 30, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFT Power Powder Detergent is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT Power Powder.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 Solubility in Water: Completely Vapor Pressure: < 0.01 Torr @ 15°C pH: 7-8.1Appearance: White Powder Odor: Fresh ScentSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.FOG Free, the natural choice for a cleaner planet. Ph: 843-735-6626Ph: 800-364-23304365 Dorchester Rd, Bldg 300 STE. 301North Charleston, SC 29405www.FogFreeTechnologies.comINFO@FogFreeTechnologies.com Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. Reproduction Not Authorized Without Prior Permission. Return on InvestmentThe FFT-Solution® Nontoxic Oil Dispersant Agent product line provides multiple levels of project cost savings and efficiencies.• Product Cost Savings - Because it is a natural, 100% organic, plant-basedproduct, FFT-Solution® Nontoxic Oil Dispersant Agent is affordable andefficient to manufacture. Raw materials are in abundant supply andautomated production methods maintain stable pricing to customers.• Shipping Cost Savings – A 60-month shelf life for concentrated productprovides excellent value in transportation savings.• Application Efficiency – FFT-Solution® green products provide animmediate value in application rates compared to other processes. TheFFT patented formula begins working immediately upon application.Hydrocarbon contaminants quickly break down into nanoscale micellesthat native bacteria easily consume. This increase in bioavailabilityallows rapid degradation and minimizes reapplication.• Environmental Stewardship – It is impossible to discuss the impactof oil pollution without acknowledging the role of negative publicsentiment. Using a natural, nontoxic, organic compound becomespart of any media story describing improved methods of reducinghazardous oil waste accidents by reducing transport risk. It is animportant step in an ever-increasing environmentally conscious world.• Scaled Applications - FFT-Solution® products provide a quantitativemethod for treatment using proven automated technology. EmployingUSCG approved oily water compliance monitors allows the operatorto monitor the progress of the treatment batch and add product onlywhen needed. No overdosing that wastes resources.• RAPID RESULTS = LOWER OVERALL REMEDIATION COSTS - The use ofFFT-Solution® nontoxic products eliminates hazardous hydrocarbonpollution in both aqueous and saturated sediment (terrestrial)contamination environments in time frames of less than a week.No More Toxic ChemicalsNature’s own organic compounds form the active ingredients of FFT-SOLUTION® products. FFT-SOLUTION® nontoxic products are completely soluble in water and unspent product will biodegrade naturally.The FFT-SOLUTION® patented formula (US Patent 8,092,708) is the basis for all its green products. Each product has a similar chemical reaction to any hydrocarbon molecule it contacts. A polar bond at the molecular level transforms hydrocarbons into nanoscale micelles. In an aqueous environment, this is called a colloidal suspension. The hydrocarbon material separates into nanoscale micelles that remain in suspension while naturally occurring bacteria transform them to smaller organic substances through biodegradation. The end products of most biodegradation processes are carbon dioxide and water.FFT-SOLUTION® products benefit life in all ecosystems damaged by hydrocarbon pollution. Use of a nontoxic, biodegradable, green product that is made from renewable, plant based resources, creates an organic solution that returns to nature along with the contaminants it remediates. Only true nontoxic remediation enhances ecological, economic, and aesthetic health, assuring the best future for all regions negatively affected by hydrocarbon pollution.The Nanoscale Colloidal MicelleFormation of this nanoscale micelle is FFT’s weapon against hydrocarbon pollution. The hydrophillic particles (FFT, outer) trap the hydrophobic particles of oil (red, center) using polar bonds. This simple chemical process renders oil into bite-sized pieces that are easily biodegraded by native microbes.Interior viewHydrocarbonPolar BondsFFT ProductCopyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT Laundry CleanerEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFT Laundry CleanerChemical Use: Laundry CleanerChemical Family: Coupling Blend MSDS Issue Date: April 30, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFT Laundry Cleaner is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT Laundry Cleaner.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.FOG Free, the natural choice for a cleaner planet. Ph: 843-735-6626Ph: 800-364-23304365 Dorchester Rd, Bldg 300 STE. 301North Charleston, SC 29405www.FogFreeTechnologies.comINFO@FogFreeTechnologies.com Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. Reproduction Not Authorized Without Prior Permission. Return on InvestmentThe FFT-Solution® Nontoxic Oil Dispersant Agent product line provides multiple levels of project cost savings and efficiencies.• Product Cost Savings - Because it is a natural, 100% organic, plant-basedproduct, FFT-Solution® Nontoxic Oil Dispersant Agent is affordable andefficient to manufacture. Raw materials are in abundant supply andautomated production methods maintain stable pricing to customers.• Shipping Cost Savings – A 60-month shelf life for concentrated productprovides excellent value in transportation savings.• Application Efficiency – FFT-Solution® green products provide animmediate value in application rates compared to other processes. TheFFT patented formula begins working immediately upon application.Hydrocarbon contaminants quickly break down into nanoscale micellesthat native bacteria easily consume. This increase in bioavailabilityallows rapid degradation and minimizes reapplication.• Environmental Stewardship – It is impossible to discuss the impactof oil pollution without acknowledging the role of negative publicsentiment. Using a natural, nontoxic, organic compound becomespart of any media story describing improved methods of reducinghazardous oil waste accidents by reducing transport risk. It is animportant step in an ever-increasing environmentally conscious world.• Scaled Applications - FFT-Solution® products provide a quantitativemethod for treatment using proven automated technology. EmployingUSCG approved oily water compliance monitors allows the operatorto monitor the progress of the treatment batch and add product onlywhen needed. No overdosing that wastes resources.• RAPID RESULTS = LOWER OVERALL REMEDIATION COSTS - The use ofFFT-Solution® nontoxic products eliminates hazardous hydrocarbonpollution in both aqueous and saturated sediment (terrestrial)contamination environments in time frames of less than a week.No More Toxic ChemicalsNature’s own organic compounds form the active ingredients of FFT-SOLUTION® products. FFT-SOLUTION® nontoxic products are completely soluble in water and unspent product will biodegrade naturally.The FFT-SOLUTION® patented formula (US Patent 8,092,708) is the basis for all its green products. Each product has a similar chemical reaction to any hydrocarbon molecule it contacts. A polar bond at the molecular level transforms hydrocarbons into nanoscale micelles. In an aqueous environment, this is called a colloidal suspension. The hydrocarbon material separates into nanoscale micelles that remain in suspension while naturally occurring bacteria transform them to smaller organic substances through biodegradation. The end products of most biodegradation processes are carbon dioxide and water.FFT-SOLUTION® products benefit life in all ecosystems damaged by hydrocarbon pollution. Use of a nontoxic, biodegradable, green product that is made from renewable, plant based resources, creates an organic solution that returns to nature along with the contaminants it remediates. Only true nontoxic remediation enhances ecological, economic, and aesthetic health, assuring the best future for all regions negatively affected by hydrocarbon pollution.The Nanoscale Colloidal MicelleFormation of this nanoscale micelle is FFT’s weapon against hydrocarbon pollution. The hydrophillic particles (FFT, outer) trap the hydrophobic particles of oil (red, center) using polar bonds. This simple chemical process renders oil into bite-sized pieces that are easily biodegraded by native microbes.Interior viewHydrocarbonPolar BondsFFT ProductCopyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT Laundry CleanerEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFT Laundry CleanerChemical Use: Laundry CleanerChemical Family: Coupling Blend MSDS Issue Date: April 30, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFT Laundry Cleaner is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT Laundry Cleaner.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT Laundry CleanerEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFT Laundry CleanerChemical Use: Laundry CleanerChemical Family: Coupling Blend MSDS Issue Date: April 30, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFT Laundry Cleaner is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT Laundry Cleaner.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT-Solution® Nontoxic Oil Dispersant AgentEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFT Solution® Nontoxic Oil Dispersant AgentChemical Use: For treatment of oil spill pollution incidents involving crude or refined petroleum products.Chemical Family: Coupling Blend MSDS Issue Date: March 14, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently defined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush contaminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. For manual, aerial or vessel spray applications in approved treatment use zones only. Check with the on-scene commander prior to use.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on re-quirements of the contamination to which FFT-Solution® Nontoxic Oil Dispersant Agent is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT-Solution® Nontoxic Oil Dispersant Agent.SECTION 9. Physical DataBoiling Point: N/A Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither ingredients nor finished product are known to persist in the environment. Product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/aTSCA: All ingredients are listed on the TSCA inventory.Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Pat-ent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable resources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT-Solution® Nontoxic Oil Dispersant AgentEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFT Solution® Nontoxic Oil Dispersant AgentChemical Use: For treatment of oil spill pollution incidents involving crude or refined petroleum products.Chemical Family: Coupling Blend MSDS Issue Date: March 14, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently defined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush contaminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. For manual, aerial or vessel spray applications in approved treatment use zones only. Check with the on-scene commander prior to use.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on re-quirements of the contamination to which FFT-Solution® Nontoxic Oil Dispersant Agent is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT-Solution® Nontoxic Oil Dispersant Agent.SECTION 9. Physical DataBoiling Point: N/A Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither ingredients nor finished product are known to persist in the environment. Product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/aTSCA: All ingredients are listed on the TSCA inventory.Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Pat-ent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable resources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT Sediment Treatment AgentEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFT Sediment Treatment AgentChemical Use: For enhancing biodegradation of hydrocarbon contaminants in upland or low moisture level sediments and soils.Chemical Family: Coupling Blend MSDS Issue Date: March 14, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFT Sediment Treatment Agent is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT Sediment Treatment Agent.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFC-500LF™ - Multiple Waste Water Source Treatment SolutionEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFC-500LFTM Multiple Waste Water Source Treatment SolutionChemical Use: For treating waste water from multiple sources including grey water, oily water, and other water contaminated with fats, oils, and greases in common or sepa-rate treatment tanks. Can also be used for treatment of wetlands, marshes, or other high moisture content soils and sediments along coastal boundaries.Chemical Family: Coupling Blend MSDS Issue Date: March 14, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFC-500LF™ Multiple Waste Water Source Treatment Solu-tion is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFC-500LF™ Multiple Waste Water Source Treatment Solution.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT Petroleum Cleaning AgentEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFT Petroleum Cleaning AgentChemical Use: For Cleaning Petroleum Product (refined and crude) from Equipment and Work Surfaces. Dilute as needed by user.Chemical Family: Coupling Blend MSDS Issue Date: March 14, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFT Petroleum Cleaning Agent is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT Petroleum Cleaning Agent.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT Petroleum Cleaning AgentEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFT Petroleum Cleaning AgentChemical Use: For Cleaning Petroleum Product (refined and crude) from Equipment and Work Surfaces. Dilute as needed by user.Chemical Family: Coupling Blend MSDS Issue Date: March 14, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFT Petroleum Cleaning Agent is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT Petroleum Cleaning Agent.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFC-500LF™ - Multiple Waste Water Source Treatment SolutionEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFC-500LFTM Multiple Waste Water Source Treatment SolutionChemical Use: For treating waste water from multiple sources including grey water, oily water, and other water contaminated with fats, oils, and greases in common or sepa-rate treatment tanks. Can also be used for treatment of wetlands, marshes, or other high moisture content soils and sediments along coastal boundaries.Chemical Family: Coupling Blend MSDS Issue Date: March 14, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFC-500LF™ Multiple Waste Water Source Treatment Solu-tion is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFC-500LF™ Multiple Waste Water Source Treatment Solution.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT Rig WashEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFT Rig WashChemical Use: For general cleaning of oil fouled external surfaces. Concentrate form requires dilution before use. Dilution ratios dependent on hydrocarbon concentration level to be cleaned as determined by user.Chemical Family: Coupling Blend MSDS Issue Date: March 14, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFT Rig Wash is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT Rig Wash.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT Petroleum Cleaning AgentEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFT Petroleum Cleaning AgentChemical Use: For Cleaning Petroleum Product (refined and crude) from Equipment and Work Surfaces. Dilute as needed by user.Chemical Family: Coupling Blend MSDS Issue Date: March 14, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFT Petroleum Cleaning Agent is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT Petroleum Cleaning Agent.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT Petroleum Cleaning AgentEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFT Petroleum Cleaning AgentChemical Use: For Cleaning Petroleum Product (refined and crude) from Equipment and Work Surfaces. Dilute as needed by user.Chemical Family: Coupling Blend MSDS Issue Date: March 14, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFT Petroleum Cleaning Agent is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT Petroleum Cleaning Agent.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT Rig WashEmergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFT Rig WashChemical Use: For general cleaning of oil fouled external surfaces. Concentrate form requires dilution before use. Dilution ratios dependent on hydrocarbon concentration level to be cleaned as determined by user.Chemical Family: Coupling Blend MSDS Issue Date: March 14, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFT Rig Wash is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT Rig Wash.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT Rig Wash 51Emergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFT Rig Wash 51Chemical Use: For general cleaning of oil fouled external surfaces. Ready to use. No dilution required unless desired by user.Chemical Family: Coupling Blend MSDS Issue Date: March 14, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFT Rig Wash 51 is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT Rig Wash 51.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.Copyright 2014 - All Rights Reserved by FOG FREE Technologies, LLC. MSDS Reproduction Authorized Without Modification. MSDS For FFT Rig Wash 51Emergency OverviewA clear amber liquid that poses little or no immediate hazard. NFPA flammability rating is zero.SECTION 1. Product and Company IdentificationProduct Name: FFT Rig Wash 51Chemical Use: For general cleaning of oil fouled external surfaces. Ready to use. No dilution required unless desired by user.Chemical Family: Coupling Blend MSDS Issue Date: March 14, 2014MANUFACTURER: Fog Free Technologies, Inc.4365 Dorchester Road, Ste 301, North Charleston SC 29405EMERGENCY TELEPHONE NUMBERS: Main (843) 735-6626 or Cell (478) 697-2588URL: www.fogfreetechnologies.comSECTION 2. Hazardous IngredientsThis product does not contain hazardous or carcinogenic ingredients as currently de-fined by OSHA Regulations.SECTION 3. Hazard IdentificationHMIS RATING Symptoms of OverexposureHealth 1 Eye Contact Dry or irritated eyesFlammability 0 Skin Contact Dry or irritated skinReactivity 0 Inhalation Irritated mucous membranesIngestion Nausea and/or crampsHealth Effects No chronic effects expectedSECTION 4. First Aid MeasuresEye Contact: Flush eyes for 15 minutes with clean water. Remove contact lenses if worn. Seek immediate medical attention. Be sure to rinse under the eyelids.Skin Contact: Remove contaminated clothing and rinse with plenty of water.Inhalation: Move to fresh air. If irritation occurs, seek medical attention.Ingestion: DO NOT INDUCE VOMITING. Get medical attention immediately.SECTION 5. Firefighting MeasuresUEL(%) None Flash Point Greater than 200° FLEL(%) None Extinguishing Media Non-flammable / non- combustibleUnusual Hazards None Special Firefighting Procedures NoneSECTION 6. Accidental Release MeasuresContain large spills and pump to recover. Small spills can be mopped up. Flush con-taminated area with water. Dispose of in accordance with all Federal, State and Local regulations. Remove any ignition sources.SECTION 7. Handling and StorageKEEP OUT OF REACH OF CHILDREN. Store in a cool dry place. Keep container closed when not in use. Wear proper protective equipment when handling this product. Use only in work areas with contained waste water storage or treatment capacities.SECTION 8. Exposure ControlThreshold Limit Value: Not established.Ventilation: Use with adequate ventilationRespiratory Protection: None needed when used as directed.Eye Protection: Safety glasses or goggles.Hand Protection: Latex or neoprene gloves recommended.NOTE: HAZMAT personal protective equipment and protective clothing requirements are based on requirements of the contamination to which FFT Rig Wash 51 is being applied. Always default to the requirement for the most hazardous material in the work site being treated with FFT Rig Wash 51.SECTION 9. Physical DataBoiling Point: Greater than 200° F Evaporation Rate: less than waterSpecific Gravity: 1.01 pH: 7-8.1Solubility in Water: Completely Appearance: Clear Amber LiquidVapor Pressure: < 0.01 Torr @ 15°C Odor: No OdorSECTION 10. Stability and ReactivityStability: Stable Hazardous polymerization: Will not occurDecomposition Products: CO, CO2 Materials to avoid: Strong acids & oxidizersConditions to avoid: Extreme TemperaturesSECTION 11. Toxicology Information - The ingredients in this product are not listed on the OSHA Z list, NTP, or IARC reference sources. The ingredients in this product are not known to cause sensitization.SECTION 12. Ecological Information - Raw materials and ingredients used in this prod-uct are biodegradable. Neither the ingredients nor the finished product are known to persist in the environment. This product does not contain solvents, emulsifiers or detergents.SECTION 13. Disposal Considerations - Dispose of this product by use as directed on the label. If this is not possible, dispose of in accordance with all Federal, State, Local, and corporate regulations.SECTION 14. Transportation Information - Cleaning Compound LiquidSECTION 15. Regulatory InformationSARA Reporting Requirements: None CERCLA Reportable Quantities: n/a TSCA: All ingredients are listed on the TSCA inventory. Ingredients in this product are not hazardous or carcinogenic as defined in 29CFR 1910.1200. The proprietary ingredients of this product are protected by United States Patent 8,092,708-B2. Information on proprietary materials is available in 29CFR 1910.1200(i)(1). This product is made from renewable re-sources and is completely biodegradable. By several industry definitions, all of the FOG Free Technology products are considered to meet the standard for being a Green Product.