Free-Standing Absorbing Post Filter Brochure

POST POLISHING FILTERThe absorbing capacity of each charge is determined by the amount of oils and silicone that pass through the filter.Con-Serv always recommends regular testing and maintenance of the equipment that dispenses and applies on line products.Following the above recommendations will help reduce excessive amounts of materials that cause problems in reclaim water.Con-Serv’s NEW Free-Standing Absorbing Post FilterA rechargeable element filled with carbonizedpeat moss. This unique material has theability to remove dissolved problem causingwaxes, tire dressing and other silicone basedsolutions. Silicones are inert and like othernon-organic material cannot be decomposedusing biological methods.This post filter can easily be installed on thedischarge side of the filtered water going tothe wash equipment. The filter has a simpleinlet and outlet connection with no electricalrequirements. The filter is 42” high with a 2”inlet and outlet and is mounted on a tripodtype stand and takes minutes to change andrecharge.The peat moss carbon is packaged in 28lb bagsand is enough to recharge the filterapproximately 2 to 3 times.The filter housing is manufactured fromlightweight aircraft quality aluminum. Theelement that holds the carbon is made fromhigh grade stainless steel and slides easily intothe housing.The NEW POST FILTERS are manufactured orconnected together by a manifold for higherflow rates of 200 to 300 GPM by using two orthree filters.605 West Brannen Road, Lakeland, FL 33813 • (800) 868-9888 • Fax (863) 644-2304 • www.Con-ServWater.com