Model 1001HPSMS BarrierFree Drinking Fountain Spec Sheet

model 1001HPSMS Wall-Mounted Drinking FountainFEATURES & BENEFITSQUALITY CONTROLFountain is pre-built and fully water and pressure tested toensure no leaks and proper function for reducedinstallation time and added peace of mind.CONSTRUCTION18 gauge Type 304 Stainless Steel swirl design bowl, 14gauge Type 304 Stainless Steel bracket, and avandal-resistant bottom plate provides a long lasting unitwith added peace of mind.BUBBLER HEADPolished chrome-plated brass bubbler head with integrallaminar flow prevents splashing and provides a superiorflow pattern. The integral basin shank and inserted roll pinadds vandal resistance strength to the design, and theshielded angled stream orifice produces a steady sanitarysource of water.MOUNTINGGalvanized frame and 10 gauge surface plate provide themaximum mounting strength for the single bubbler MS styleHaws drinking fountains.PUSH BUTTONWith its patented (Pat. # 6,981,692) stainless steel,push-button activated valve assembly which allows forfront access stream adjustment as well as cartridge andstrainer access, this fountain offers 100% lead freewaterways. The valve works at an operating pressure rangeof 30 to 90 psi (2.1 to 6.2 bar).OPTIONSFilter: Model 6426, 12" x 2" (30.5 x 5.1 cm), in-line leadremoval element that reduces lead from incoming watersupply.Chiller: Model HCR8, 8 gph (30.3 L) remote water chillerprovides instantaneous cooling to meet a continuousdemand for chilled water.To see all options for this model, visit www.hawsco.comSPECIFICATIONSModel 1001HPSMS wall mounted barrier-free drinking fountainshall include an 18 gauge Type 304 high-polished stainlesssteel finish basin with integral swirl design, 14 gauge Type 304high-polished stainless steel wall bracket, with matching backand access panel allowing for front access of P-trap andstop, 100% lead-free waterways, in-wall mounting frame,push-button operated stainless steel valve withfront-accessible cartridge and flow adjustment, polishedchrome-plated brass vandal-resistant bubbler head withintegral laminar anti-squirt flow, chrome-plated brassvandal-resistant waste strainer, vandal-resistant bottom plate,and 1-1/4" O.D. (3.2 cm) waste pipe. REQUIRES MODELMTGFR.DF1 PRICED SEPARATELY.APPLICATIONSPerfect for either public or private indoor/outdoor settings,Model 1001HPSMS is a great fit in areas where aesthetics areimportant to the overall appeal of the architecture. This seriesis precisely mounted, making it a nice addition to anysurrounding. Beautiful high-polished finish helps to maintainthe fountains overall appeal so it always remains looking asnew as it did when it was installed. Specifically, this type ofwall mounted drinking fountain may be placed in settingssuch as: schools and other locations in and around officebuildings where the temperature remains above freezing.Model meets all current Federal Regulations for the disabledincluding those in the Americans with Disabilities Act. Hawsmanufactures drinking fountains and electric water coolers tobe lead-free by all known definitions including NSF/ANSIStandard 61, Section 9, NSF/ANSI 372, California Proposition65, and the Federal Safe Drinking Water Act. Product iscompliant to California Health and Safety Code 116875 (AB1953-2006).1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. info@hawsco.com :: www.hawsco.com :: 05 May, 2013DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.76mmROUGH-IN18-1/8"460mm15-5/8"ROUGH-IN397mm(SUPPLIED)PANELACCESS16-5/8"422mm457mm18"864mm34"ROUGH-IN14-1/8"359mm381mm(SUPPLIED)PANELBACKFLOWREINSTALL VALVE & ADJUSTWASTE ELBOW IS INSTALLED,REMOVE VALVE FROM PUSHBUTTON TO INSTALL WASTE ELBOW ONTO BOWL. AFTER 15"1-3/4"44mm(NOT SUPPLIED)(SUPPLIED)MTGFR.DF1FRAMEMOUNTINGFLOORLINE686mm27"FACEWALL(SUPPLIED)WASTE BEND1-1/4" O.D.708mmWASTEFOUNTAIN27-7/8"729mmFOUNTAINSUPPLY28-11/16"& SCREWDRIVER STOPØ 3/8" SUPPLY TUBING3"473mm18-5/8"14-1/8"359mmFLANGEPANELBACKFRAMEFACEWALLFINISHED WALL FACE.FRAME FLANGE BUTTS AGAINSTMUST BE INSTALLED SO THATIMPORTANT: MOUNTING FRAMEWASTE BEND(NOT SUPPLIED)1-1/4" IPS TRAP(NOT SUPPLIED)**1. HOLD ROUGH-IN DIMENSIONS ± 1/8" (3.2mm).2. WHEN INSTALLING THIS UNIT, LOCAL, STATE, OR FEDERAL CODES SHOULD BE ADHERED TO FOR INSTALLATION DIMENSIONS (LOCATIONS), WASTE AND SUPPLY REQUIREMENTS OTHER THAN SHOWN.3. ** INSTALLER MUST PROVIDE TRAP FOR PROPER INSTALLATION.NOTES:APPROVED:DRAWN:PART NUMBERDRAWING NO.SCALE: SHEET OFREVDRAWING TYPE: SIZE: ABY:ECN NO.DATE:DATE:ECN:REVISED PERCHK'D.: Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.C RMODEL(S)1455 KLEPPE LANESPARKS, NEVADA 89431(775) 359-4712 FAX (755) 359-7424E-MAIL: HAWS@HAWSCO.COMWEBSITE: WWW.HAWSCO.COMTHIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTSMAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.PM 08/02/9914221A00 70002076510.D1001MS/1001HPSMSDRINKING FOUNTAIN1:14 1 1HMINSTALLATION47972012