Model Detective+ - Detective Wireless Will Transmit Gas Alert Signals Datasheet

Detective+ Temporary Area Monitorl Versatile and user friendlyl Rugged, tripod design l Loud and clear alarms l Wireless capabilities When lives and property are at risk and you need gas detection equipment that is totally reliable, you need Crowcon. For over 40 years Crowcon has been developing and manufacturing high quality products with a reputation for reliability and technical innovation.Crowcon provides both single gas and multigas monitors for personal and portable safety applications providing protection against a wide range of industrial gas hazards. Detective+ is based on the highly successful Triple Plus+ multigas monitor for use in utility, oil and gas applications. Singly, or linked together using Detective Net, Detective+ gives a loud and clear alarm providing effective warning of gas hazards. The rugged, water and impact resistant design and clear display make Detective+ the ideal choice for your transportable gas detection needs.Choosing the portable gas detector for your needsDetective+Transportable Multigas Area MonitorPlease see the back page for full technical specifications.Rugged, tripod design Raised sensor apertures Folding or fixed leg options IP65 specifications Versatile and user friendly Infrared sensors availableBuilt in pump optionClear displayAllows sampling of highly flammable gas levels and carbon dioxideUnaffected by poisoningProvides fast response and extra sensor protection Provides sampling versatilityProvides clear information, allows identification of gas hazardPrevents water ingressAllows stacking for easier storage and transportation Provides excellent sensor protection Loud and clear alarms 25 Detective+ units may be linked together, up to 100m from adjacent unitsUnits sending an alarm flash faster Audible and visible confidence blipVivid red LED clusters for visual alarm Multiple beaconsAll linked Detective+ units indicate an alarm sensed by any one unitProvides effective warning of gas hazardsEnsures 360O visibilitySizeWeightBatteryOperating temperature rangeHumidity Ingress protection Wireless range Maximum devices Approvals Compliance Available frequencies Country Approvals (wide range available, speak to your local crowcon representative)Detective Net 433 Specification:140 x 76 x 37mm (5.5 x 3 x 1.5ins) (excluding mounting clip)7.5kg (16lbs) (excluding mounting clip)Non-rechargeable, 1 year plus battery life. Shelf life: 2 years-20°C to +55°C (-4°F to 131°F)0% and 95% relative humidity (non-condensing) at +40°CIP65 & IP67Typically 70m dependent upon physical location and environmental conditions but up to 100m possibleMaximum number of devices in a network is 25IECEX: Ex ia IIC T4 Ga Tamb -20°C to +55° CATEX: II 1 G Ex ia IIC T4 Ga Tamb -20°C to +55°C EN 300220-2 V2.3.3 (2010-02)EN301489-3v1.4.1 EN301489-1v1.9.2 EN50270:2006 (Type 1) EN60950-1:2006+A12:2011 IEC60950-1:2005 2nd Edition: A1:2009 433MHzIDA ApprovalEQUIPMENT REGISTRATION UNDER TELECOMMUNICATIONS(DEALERS) REGULATIONSRegistration Number: N2177-13IDA Spec. No.: IDA TS SRDDetective Net is a wireless module that can replace interconnecting cable for Detective and Detective+. Detective Net will transmit gas alert signals and other alarms wirelessly between Detective units using a 433MHz signal up to 100 metres in distance. Detective Net uses the proven RICOCHET mesh network. When establishing a mesh network, Detective Net automatically selects the best line to give strongest interconnections. Should wireless connection between two devices weaken, the network will ‘self-heal’ and automatically re-route communications via alternate RICOCHET enabled devices, creating a mesh type network that provides a more robust and efficient wireless network.When Detective+ goes into alarm, the signal will be sent to other units alerting the user to gas being present in the area. Detective Net will also transmit other faults, including loss of signal and battery low alarm. If the signal is weak due to heavy metal work being present the Detective Net can be used as a repeater to boost the signal between units. In a confined space the unit can use up to 20 metres of cable to position the unit in a position that will increase signal. For more ideas see the suggestions below or visit our website. Detective Net 433Network hopping Ring networkMesh networkRepeater networkSet up scenarios:For full set up scenarios visit www.crowcon.com/uk/products/portables/detective-netDetective Netwww.crowcon.com UK:Tel: +44 (0) 1235 557700Fax: +44 (0) 1235 557718Email: sales@crowcon.comUS:Tel: +1 859 957 1039Toll Free: 800 527 6926Fax: +1 513 957 1044Email: salesusa@crowcon.usNL:Tel: +31 10 421 1232Fax: +31 10 421 0542Email: eu@crowcon.comSG:Tel: +65 6745 2936Fax: +65 6745 0467Email: sales@crowcon.com.sgCN:Tel: +86 (0) 10 6787 0335Fax: +86 (0) 10 6787 4879Email: saleschina@crowcon.comIN:Tel: +91 22 6708 0400Fax: +91 22 6708 0405Email: salesindia@crowcon.comCrowcon reserves the right to change the design or specification of the product without notice.Check www.crowcon.com for updatesSizeWeightVisible alarms Audible alarmsDisplayBatteryBattery lifeTypical response times Expected sensor lifeOperating temperature rangeHumidity ApprovalsStandards Ingress protection EMCPC interfaceCalibration Accessories Sampling Linked DetectivesP01025GB Issue 9 September 2013Detective+ Specification:640 x 455 x 455mm (25.2 x 17.9 x 17.9ins)7.5kg (19lbs) Three large, top mounted red LED clusters and a single red LED on control panel. Alarm mode: LED clusters flash in quick succession. LED clusters of linked Detectives repeating the alarm, flash slower than LED lights on those Detectives sensing the hazardNormal working: Slow flashing green LEDBattery low: Rapid flashing green LEDWailing, omni-direction siren, 104 dBA at 1mHigh contrast LCD with back light. Values and units for up to 4 gases displayed simultaneously at current, TWA or peak levels, low battery, real time and elapsed time calibration and configuration data also displayedStandard 6V, 7.2Ah, sealed lead acid battery pack Optional 6V, 12Ah high capacity pack Up to 36 hours with flammable/ CO2 sensor fitted with 7.2Ah batteryUp to 60 hours with optional 12Ah battery pack Methane 20s, oxygen 10s, typical toxic gas 20s, IR 20sFlammable 5 years, toxic 3 years, oxygen 2 years minimum, IR>5 years-20OC to +50OC (-4OF to 122OF)0-95% RH non-condensing Europe: ATEX II 2G EEx ib d IIC T4International: IECEx EEx ib d IIC T4EN50014, EN50018, EN50020, EN50104, EN45544, IEC60079-0/-1 IEC60079-11IP65EN 50270, FCC CFR47 Part 15Via RS232 lead. Portables PC software can be used to set alarms, clock, datalogging interval and password, manages datalogging giving graphical display of instrument log file and allows to export to spreadsheetQuick calibration using internal menu command, Portables PC or the Crowcon CheckBox IMH management system Baffle plate, interconnecting leads, RS232 communications leadInternal electric sampling pump option, manual aspiration Up to 12 units can be linked to provide perimeter or area monitoringGasFlammable gas Oxygen (O2)Hydrogen sulphide (H2S)Carbon monoxide (CO)Sulphur dioxide (SO2)Chlorine (Cl2)Nitrogen dioxide (NO2)Phosphine (PH3)Ammonia (HN3)Ammonia (NH3)Hydrogen (non-flammable levels)Hydrogen cyanide (HCN)Hydrogen chloride (HCl)*/+Chlorine dioxide (ClO2)+Hydrogen fluoride (HF)+Ethylene oxide (C2H4O)*Volatile organic*/+ Gases and Ranges:Range0-100 LEL0-25% 0-50ppm0-500ppm0-10ppm0-5ppm0-10ppm 0-5ppm0-50ppm0-1000ppm 0-2000ppm0-25ppm 0-10ppm0-1ppm0-10ppm0-10ppm0-100ppmTypical Alarm20% LEL19% & 23%10ppm35ppm2ppm0.5ppm2ppm0.5ppm25ppmn/an/a10ppm5ppm0.1ppm1ppm5ppmn/aInfrared sensorsInfrared (IR) sensors for flammable gas can be supplied as a single range, 0-100% LEL, utlising a single display channel, or as a dual range, 0-100% LEL/0-100% volume, which then occupies two display channels.Carbon dioxide sensors are supplied as 0-5% volume. Only one IR sensor can be fitted, and IR sensors can only be used in combination with oxygen and toxic sensors.Flammable gasFlammable gasAvailable for methane, propane, butane or ethyleneCarbon dioxide (CO2) Range0-100% LEL0-100% v/v0 to 5% v/vTypical alarm(s)20% LELNone0.5 and 1.5% v/v* One biased sensor per Detective++ Reactive gas, care required during sampling, contact Crowcon for details.Required ranges and alarms may vary by country and application and these can be configured as required. Radio frequency 433 MHz certified in:SlovakiaSloveniaSpainSwedenSwitzerlandSingaporeTrinidad and TobagoUnited Arab EmiratesAustriaBelgiumBulgariaCyprusCzech RepublicDenmarkUKEstoniaFinlandFranceGermanyGreeceHungaryIcelandIrelandItalyLatviaLithuaniaMaltaNetherlandsNorwayPolandPortugalRomania