Model MU - Centrifugal Pumps Brochure

MUCentrifugal pumps according to EN 733Pompe centrifughe normalizzate EN 733MUCENTRIFUGAL PUMPS ACCORDING TOEN 733 STANDARDSPOMPE CENTRIFUGHE NORMALIZZATE EN 733COMMON AND GENERAL USEFresh and sea water, condensate, oils, chemical and petro-chemical products. IMPIEGHIPer acqua, acqua mare, condensato, prodotti chimici, petrolchimici.MAIN APPLICATIONS Shipbuilding industry, heating plants, air conditioning sy-stem, aqueducts, effluent treatment plants, fire fighting, petrochemical plants. PRINCIPALI APPLICAZIONI Applicazioni per uso cantieristico, impianti di riscaldamento, impian-ti di condizionamento, acquedotti, trattamento acque, antincendio, convogliamento idrocarburi.MAIN FEATURESCARATTERISTICHE COSTRUTTIVEPUMP: centrifugal type, end-suction single volute casing, single flow and axial inlet.POMPA: centrifuga con corpo a spirale orizzontale monostadio ad unico flusso ed aspirazione assiale.IMPELLER: high efficiency, close type, statically and dynami-cally balanced. Low axial thrust thanks to impeller provided with balancing holes.GIRANTE: di tipo chiuso ad elevato rendimento, equilibrata statica-mente e dinamicamente. Equilibratura della spinta assiale mediante camera anulare sita posteriormente alla girante stessa munita di fori di bilanciamento. MOUNTING SYSTEM: shaft supported by radial and thrust type bearings placed in an oil bath bracket or, upon request, by self lubricated or grease lubricated ball bearings. The bra-cket is usually made of cast-iron, bronze or stainless steel for special executions (non magnetic pumps).SUPPORTAZIONE: albero supportato da cuscinetti radiali ed assiali posizionati in un supporto a bagno d’olio o a richiesta con cuscinetti au-tolubrificanti o lubrificati a grasso. Supporto costruito normalmente in ghisa, il quale può essere prodotto in bronzo o in acciaio inox per utilizzi speciali (pompe amagnetiche). . SEAL: single mechanical seal to DIN 24960. Special mechanical seal or car-tridge type for specific application or aggressive liquids. Possibility to install soft-packing with external flushing. For temperature higher than 120°C, it is possible to fit the pump with a cooling chamber.TENUTA: tenuta meccanica singola normalizzata DIN 24960. Te-nute speciali e a cartuccia per liquidi ed applicazioni particolari. Possi-bilità di installare tenuta a baderna con flussaggio esterno. Per tempe-rature superiori ai 120 °C possibilità di dotare la pompa di camera di raffreddamento della tenuta.SELF-PRIMING: Small and medium size pumps can be equip-ped with built-in priming element; all sizes can be supplied in self-priming version with an additional air ejector.AUTOADESCANTE: taglie piccole e medie possono essere fornite di elemento autoadescante ad anello liquido; tutte le taglie possono es-sere fornite con eiettore ad aria automatico.BACK PULL OUTIt is possible to remove the rotating components without disturbing pipes, pump casing and motor by using a flexi-ble spacer coupling. SMONTAGGIOImpiegando un giunto spaziatore è possibile sfilare la parte rotante senza intervenire sulle tubazioni, corpo-pompa e motore. BASE PLATEThe base plate is generally built of welded steel and it can be provided with drain-pan for possible drippings.To comply with special requirements (non magnetic and/or anti vibration) it can be manufactured in stainless steel (AISI 316) and equipped with anti vibration and/or anti-shock resilient mountings. BASAMENTOIl basamento è costruito normalmente in acciaio elettro-saldato, lo stes-so può essere corredato di drenaggi per eventuali stillicidi della pompa. Per esecuzioni speciali (amagnetiche e/o antivibrazione) può essere co-struito in acciaio inox e corredato di resilienti antivibrazione e antishock. SPECIAL VERSIONSSpecial versions according to Naval Rules are also available: shock-proof, vibration-proof, noise-proof, non magnetic.COSTRUZIONI SPECIALISono previste costruzioni a norma MARINA MILITARE: antishock, an-tivibrazione, antirumore, amagnetichematerialsmaterialimax. working pressurepressione max. eserciziocast ironghisa 10 barstainless steel, bronze, special alloy acciaio inox, bronzo, leghe speciali 16 barnote: special executions exceeding the above limits available on requestnota: esecuzioni speciali al di fuori dei limiti sopraesposti realizzate su richiestainterchangeability intercambiabilità:Models modelli 45casings corpi 45iMpellersgiranti 45shaftsalberi 6bearing bracketssupporti 6covers coperchi 6Mechanical seals tenute meccaniche 6self priming element with liquid ringelemento autoadescante ad anello liquidoclose coupled versionversione monobloccobare shaft versionversione ad asse nudoLONGITUDINAL SECTIONSEZIONE LONGITUDINALE6576.142006855.16510.16510.26700.16581151022006510.2657946096700.232606510.338582540430012256577326030176576.231303134385430112111430065776855.3 45906855.21110 459015214120657324504130461065804134SOFT PACKING VERSIONVERSIONE TENUTA A bADERNA4300229125205110651965456700.3 5100Pos Description descrizione1110 Pump casing Corpo pompa1225 Casing cover Coperchio del corpo1510 Wear ring Anello di usura1521 Wear ring Anello di usura2111 Pump shaft Albero della pompa2200 Impeller Girante2291 Priming stage impeller Girante stellare2450 Shaft sleeve Camicia d’albero2520 Shoulder ring Anello spallamento2540 Deflector Deflettore3011 Radial ball bearing Cuscinetto radiale3017 Angular ball bearing Cuscinetto obliquo3130 bearing bracket Supporto doppio3134 Support foot Piede del supporto3260 bearing cover Coperchio supporto3854 Oil filler plug Tappo per l’olio3858 Oil level Spia dell’olio4120 Stuffing box gland Premitreccia4130 Gland packing Guarnizione a treccia4134 Lantern ring Anello lanterna4200 Mechanical seal Tenuta meccanica4300 Radial shaft seal Anello di tenuta4590 Gasket Guarnizione4609 O-Ring O-Ring4610 O-Ring O-Ring5100 Priming stage casing Corpo autoadescante5110 Priming stage cover Coperchio autoadescante6510.1 Plug Tappo6510.2 Plug Tappo6510.3 Plug Tappo6519 Thread fitting Raccordo6545 Seeger seeger6573 Stud Prigioniero6576.1 Screw Vite6576.2 Screw Vite6577 Screw Vite6579 Screw Vite6580 Nut Dado6581 Impeller nut Dado girante6700.1 key Chiavetta6700.2 key Chiavetta6700.3 key Chiavetta6855.1 Washer Rosetta6855.2 Washer Rosetta6855.3 Washer RosettaSELF-PRIMING VERSIONVERSIONE AUTOADESCANTEPUMP DIMENSIONSdIMENsIONI POMPAShaftALbEROPUMP tYPEPOMPA TIPOSUCtION fLaNGEbOCCA AsP.DELIVERY fLaNGEbOCCA MANdATAfLaNGES DIMENSIONSdIMENsIONI FLANGE (UNI 2223-2229 PN 10 UNI 2223-2229 PN 16*)hOLES NUMBERNUMERO FORIDRaINaGEdRENAGGIOVaCUUM GaUGEMANOvUOTOMETROPRESSURE GaUGEMANOMETROPUMP WEIGhtPEsO POMPAa f e h h1 h2 b c m1 m2 n1 n2 s l M W d t u DNs DNd D D’ bf bf’ K K’ g g’ y y’ D1 PM1 PM2 Kg63 237 300 272 112 160 50 12 100 70 220 180 12 36 90 161 19 21,5 6 25-160 25 25 115 115’ 16 16 85 85 14 14 4 4 1/4’’G 1/4’’G 1/4’’G 2280 360 440 340 160 180 50 15 100 70 240 190 14 50 110 260 24 27 8 25-200 40 25 150 115 18 16 110 85 18 14 4 4 1/4’’G 1/4’’G 1/4’’G 4180 360 440 292 132 160 50 15 100 70 240 190 14 50 110 260 24 27 8 32-160 50 32 165 140 20 18 125 100 18 18 4 4 1/4’’G 1/4’’G 1/4’’G 4380 360 440 340 160 180 50 15 100 70 240 190 14 50 110 260 24 27 8 32-200 50 32 165 140 20 18 125 100 18 18 4 4 1/4’’G 1/4’’G 1/4’’G 43110 360 470 405 180 225 65 18 125 95 320 250 14 50 110 260 24 27 8 32-250 50 32 165 140 20 18 125 100 18 18 4 4 1/4’’G 1/4’’G 1/4’’G 6280 360 440 292 132 160 50 15 100 70 240 190 14 50 110 260 24 27 8 40-160 65 40 185 150 20 18 145 110 18 18 4 4 1/4’’G 1/4’’G 1/4’’G 43100 360 460 340 160 180 50 15 100 70 265 212 14 50 110 260 24 27 8 40-200 65 40 185 150 20 18 145 110 18 18 4 4 1/4’’G 1/4’’G 1/4’’G 45100 360 460 405 180 225 65 15 125 95 320 250 14 50 110 260 24 27 8 40-250 65 40 185 150 20 18 145 110 18 18 4 4 1/4’’G 1/4’’G 1/4’’G 60125 470 595 480 200 280 65 20 125 95 345 280 14 80 110 340 32 35 10 40-315 65 40 185 150 20 18 145 110 18 18 4 4 1/4’’G 1/4’’G 1/4’’G 98100 360 460 340 160 180 50 15 100 70 265 212 14 50 110 260 24 27 8 50-160 65 50 185 165 20 20 145 125 18 18 4 4 1/4’’G 1/4’’G 1/4’’G 48100 360 460 360 160 200 50 15 100 70 265 212 14 50 110 260 24 27 8 50-200 65 50 185 165 20 20 145 125 18 18 4 4 1/4’’G 1/4’’G 1/4’’G 48100 360 460 405 180 225 65 15 125 95 320 250 14 50 110 260 24 27 8 50-250 65 50 185 165 20 20 145 125 18 18 4 4 1/4’’G 1/4’’G 1/4’’G 60125 470 595 505 225 280 65 25 125 95 345 280 14 80 110 340 32 35 10 50-315 65 50 185 165 22 20 145 125 18 18 4 4 1/4’’G 1/4’’G 1/4’’G 100100 360 460 360 160 200 65 15 125 95 280 212 14 50 110 260 24 27 8 65-160 80 65 200 185 22 20 160 145 18 18 4 4 1/4’’G 1/4’’G 1/4’’G 49100 360 460 405 180 225 65 15 125 95 320 250 14 50 110 260 24 27 8 65-200 80 65 200 185 22 20 160 145 18 18 4 4 1/4’’G 1/4’’G 1/4’’G 55100 470 570 450 200 250 80 18 160 120 360 280 18 80 110 340 32 35 10 65-250 80 65 200 185 22 20 160 145 18 18 4 4 3/8’’G 1/4’’G 3/8’’G 80125 470 595 505 225 280 80 25 160 120 400 315 18 80 110 340 32 35 10 65-315 80 65 200 185 22 20 160 145 18 18 4 4 3/8’’G 1/4’’G 3/8’’G 101125 470 595 605 250 355 80 25 160 120 420 335 18 80 110 340 32 35 10 65-400 80 65 200 185 22 20 160 145 18 18 4 4 3/8’’G 1/4’’G 3/8’’G 130125 360 485 405 180 225 65 15 125 95 320 250 14 50 110 260 24 27 8 80-160 100 80 220 200 22 22 180 160 18 18 8 4 1/4’’G 1/4’’G 1/4’’G 60125 470 595 430 180 250 65 18 125 95 345 280 14 80 110 340 32 35 10 80-200 100 80 220 200 22 22 180 160 18 18 8 4 3/8’’G 1/4’’G 3/8’’G 75125 470 595 480 200 280 80 18 160 120 400 315 18 80 110 340 32 35 10 80-250 100 80 220 200 22 22 180 160 18 18 8 4 3/8’’G 1/4’’G 3/8’’G 88125 470 595 565 250 315 80 25 160 120 400 315 18 80 110 340 32 35 10 80-315 100 80 220 200 22 22 180 160 18 18 8 4 3/8’’G 1/4’’G 3/8’’G 111125 530 655 635 280 355 80 25 160 120 435 355 18 110 110 370 42 45 12 80-400 100 80 220 200 22 22 180 160 18 18 8 4 3/8’’G 1/4’’G 3/8’’G 155125 470 595 480 200 280 80 18 160 120 360 280 18 80 110 340 32 35 10 100-200 125 100 250 220 24 22 210 180 18 18 8 8 3/8’’G 1/4’’G 3/8’’G 85140 470 610 505 225 280 80 18 160 120 400 315 18 80 110 340 32 35 10 100-250 125 100 250 220 24 22 210 180 18 18 8 8 3/8’’G 1/4’’G 3/8’’G 105140 470 610 565 250 315 80 18 160 120 400 315 18 80 110 340 32 35 10 100-315 125 100 250 220 24 22 210 180 18 18 8 8 3/8’’G 1/4’’G 3/8’’G 116140 530 670 635 280 355 100 25 200 150 500 400 22 110 110 370 42 45 12 100-400 125 100 250 220 24 22 210 180 18 18 8 8 3/8’’G 1/4’’G 3/8’’G 190140 470 610 605 250 355 80 18 160 120 400 315 18 80 110 340 32 35 10 125-250 150 125 285 250 24 24 240 210 22 18 8 8 3/8’’G 1/4’’G 3/8’’G 120140 530 670 635 280 355 100 25 200 150 500 400 22 110 110 370 42 45 12 125-315 150 125 285 250 24 24 240 210 22 18 8 8 3/8’’G 1/4’’G 3/8’’G 180140 530 670 715 315 400 100 25 200 150 500 400 22 110 110 370 42 45 12 125-400 150 125 285 250 24 24 240 210 22 18 8 8 3/8’’G 1/4’’G 3/8’’G 205180 635 815 900 400 500 140 28 280 200 680 540 28 140 110 430 60 64 18 125-500 150* 125* 285 250 26 26 240 210 22 18 8 8 3/4’’G 3/8’’G 3/8’’G 400160 530 690 655 280 375 100 27 210 150 510 400 22 110 110 370 42 45 12 150-250 200 150 340 285 26 24 295 240 22 22 8 8 3/8’’G 1/4’’G 3/8’’G 200160 530 690 680 280 400 100 25 200 150 550 450 22 110 110 370 42 45 12 150-315 200 150 340 285 26 24 295 240 22 22 8 8 3/8’’G 1/4’’G 3/8’’G 190160 530 690 765 315 450 100 25 200 150 550 450 22 110 110 370 42 45 12 150-400 200 150 340 285 26 24 295 240 22 22 8 8 3/8’’G 1/4’’G 3/8’’G 235180 640 820 950 400 550 140 28 280 200 680 540 28 140 160 435 60 64 18 150-500 200* 150* 340 285 30 26 295 240 22 22 12 8 3/4’’G 1/4’’G 3/8’’G 500180 530 710 780 355 425 100 30 210 150 560 450 22 110 110 370 42 45 12 200-250 200 200 340 340 26 26 295 295 22 22 8 8 3/8’’G 1/4’’G 3/8’’G 250200 605 805 805 355 450 110 30 210 150 560 450 25 110 160 432 60 64 18 200-315 250 200 395 340 28 26 350 295 22 22 12 8 3/8’’G 1/4’’G 3/8’’G 330200 605 805 855 355 500 140 28 280 200 680 540 28 110 160 432 60 64 18 200-400 250 200 395 340 32 26 350 295 22 22 12 8 1’’G 1/4’’G 3/8’’G 410 200 640 840 1055 455 600 150 30 320 250 800 650 28 140 160 435 60 64 18 200-500 250* 200* 405 340 32 29 355 295 25 22 12 12 3/4’’G 3/8’’G 3/8’’G 600250 605 855 960 400 560 130 30 280 200 700 560 25 110 160 432 60 64 18 250-250 300 250 445 395 28 28 400 350 22 22 12 12 3/8’’G 1/4’’G 3/8’’G 450250 605 855 960 400 560 130 30 280 200 700 560 25 110 160 430 60 64 18 250-315 300 250 445 395 28 28 400 350 22 22 12 12 3/8’’G 1/4’’G 3/8’’G 460225 605 830 1000 375 625 110 30 300 220 800 680 25 110 160 432 60 64 18 250-400 300 250 445 395 28 28 400 350 22 22 12 12 3/8’’G 3/8’’G 3/8’’G 485250 750 10001100 430 670 135 30 300 220 800 665 28 140 160 526 65 69 18 250-450 300 250 445 395 28 28 400 350 22 22 12 12 3/8’’G 3/8’’G 3/8’’G 550280 640 920 1145 475 670 140 30 260 190 810 670 28 140 160 435 60 64 18 250-500 300* 250* 460 405 32 32 410 355 25 25 12 12 3/4’’G 3/8’’G 3/8’’G 650300 754 10541280 530 750 160 35 320 250 960 790 28 140 160 530 65 69 18 300-400-2 350 300 533 483 36 32 460 400 22 22 16 12 3/4’’G 3/8’’G 3/4’’G 750280 754 10341020 420 600 140 35 280 200 720 580 28 140 160 530 65 69 18 300-400-B2 350 300 533 483 36 32 460 400 22 22 16 12 3/4’’G 3/8’’G 3/4’’G 520sPM1N.y/ØgN.y'/Øg'PM2cm2m1Wbfabf'feh1n2n1M blh2hK'DNdD'DNsh1D SHAFTKXD1dtuFOR MU 250-450 X= 20PER MU 250-450FOR MU 250-400 X= 25PER MU 250-400 ShAFT ENDESTREMITà D’ALbEROkEY ACCORDING TO UNI 6604ChIAVETTA SECONDO UNI 6604sPM1N.y/ØgN.y'/Øg'PM2cm2m1Wbfabf'feh1n2n1M blh2hK'DNdD'DNsh1D SHAFTKXD1dtusPM1N.y/ØgN.y'/Øg'PM2cm2m1Wbfabf'feh1n2n1M blh2hK'DNdD'DNsh1D SHAFTKXD1dtusPM1N.y/ØgN.y'/Øg'PM2cm2m1Wbfabf'feh1n2n1M blh2hK'DNdD'DNsh1D SHAFTKXD1dtuPERFORMANCES PRESTAZIONI HEAD PREVALENZA 1450 RPMCAPACITY PORTATA Q m3/h 25-16032-16040-16050-160 65-16032-200 40-20032-25040-25065-40040-31525-20050-200 65-20080-16080-200 100-20065-315125-250100-25065-25080-25080-400 100-400125-400150-400250-315200-315150-315125-315100-31580-315150-250200-250200-50050-250 250-250150-500125-500250-400200-400250-50050-315300-400250-450 2 3 4 5 10 20 30 40 50 100 200 300 400 500 1000 16002345 10 20304050 10010010 3020 40 50 100 200 300 400 500 1000 2000 80003000 50001020304050200300400500160H feetUSGPMH mtPERFORMANCES PRESTAZIONI HEAD PREVALENZACAPACITY PORTATA Q m3/h 2900 RPM2 3 4 5 10 20 30 40 50 100 200 300 10 20 30 40 50 100 200 300 400 500 1000 2000 3000152025304050607080901001201401605060708090100200300400500500 100025-16025-20032-16032-20032-25040-16040-20040-25040-31550-16050-20050-25065-16065-20065-25065-31580-16080-20080-25050-315100-200100-250100-315125-315125-25080-315H mtUSGPMH feetPERFORMANCES PRESTAZIONI HEAD PREVALENZA 1450 RPMCAPACITY PORTATA Q m3/h 25-16032-16040-16050-160 65-16032-200 40-20032-25040-25065-40040-31525-20050-200 65-20080-16080-200 100-20065-315125-250100-25065-25080-25080-400 100-400125-400150-400250-315200-315150-315125-315100-31580-315150-250200-250200-50050-250 250-250150-500125-500250-400200-400250-50050-315300-400250-450 2 3 4 5 10 20 30 40 50 100 200 300 400 500 1000 16002345 10 20304050 10010010 3020 40 50 100 200 300 400 500 1000 2000 80003000 50001020304050200300400500160H feetUSGPMH mtPERFORMANCES PRESTAZIONI HEAD PREVALENZACAPACITY PORTATA Q m3/h 2900 RPM2 3 4 5 10 20 30 40 50 100 200 300 10 20 30 40 50 100 200 300 400 500 1000 2000 3000152025304050607080901001201401605060708090100200300400500500 100025-16025-20032-16032-20032-25040-16040-20040-25040-31550-16050-20050-25065-16065-20065-25065-31580-16080-20080-25050-315100-200100-250100-315125-315125-25080-315H mtUSGPMH feet25-16040-16025-20032-16032-20032-25050-160 65-16080-16040-20040-25040-31550-20050-25080-315100-315125-315150-315200-315200-500250-500150-500150-400125-400100-40080-400250-315200-250150-250125-250100-25080-25065-25080-200 100-20065-20065-400250-400300-400250-250125-500200-40050-315 65-315250-450 PERFORMANCES PRESTAZIONI H feet HEAD PREVALENZAH mt 2 3 4 5 10 20 30 40 50 100 200 300 400 500 1000 16002345 10 20304050 10010010 3020 40 50 100 200 300 400 500 1000 2000 80003000 50001020304050200300400500160CAPACITY PORTATA Q m3/h 1750 RPMUSGPMPERFORMANCES PRESTAZIONI HEAD PREVALENZACAPACITY PORTATA Q m3/h 3500 RPM25-16025-20032-16032-20032-25040-16050-16040-20040-25050-20050-25065-16065-20065-25080-16080-200125-250100-250100-20080-25080-3152 3 4 5 10 20 30 40 50 100 200 300 700 10 20 30 40 50 100 200 300 400 500 1000 2000 300050152025304050607080901001201401605060708090100200300400500USGPMH mtH feet98www.pompegarbarino.comAtex on requestPOMPE GARBARINO S.p.A.Headquarters:Via Marenco, 44 - 15011 Acqui Terme (AL) - Italy - Tel. +39 0144.388671 - Fax +39 0144.55260E-mail: info@pompegarbarino.itMilan Branch:Viale Andrea Doria, 31 - 20124 Milano - Italy - Tel. +39 02.67070037 - Fax +39 02.67070097 www.lizea.com