P-OEM series - Microfluidic Flow Manager Unit Brochure

19046,412165 83,5 96,5531,7520552323235651315111395,21620,39,31669,56 Spacers M3*20mm190 165 83,5 96,546,4123565233,313159,31119,3669,599,5110,3114,62051,755523232323232323DIMENSIONS OF THE P-OEM MODULE (from 1 to 4 independent channels)All dimensions in mm.DIMENSIONS OF THE PL-OEM MODULE (from 5 to 8 independent channels)APPLICATIONS & MARKETSAll dimensions in mm.MICROFLUIDIC FLOW MANAGER UNITP-OEM MODULEThe multi-channel design is highly compact, ranging from 1 to 4 channels for the P-OEM series and from 5 to 8 channels for the PL-OEM series. Since fluids are not in contact with the instrument, there is no routine cleaning and contamination is drastically reduced.Pos/Neg pressure ranges can be applied on di?erent channels of the same P/PL-OEM module.The optional advanced multi-channel Flow-Rate Control Module Software combined with the Flow Sensor Unit device makes it possible to have a full control on flow-rates in any coupled multi-channel configuration, while keeping the benefits of pressure actuation.The flow settling time is drastically reduced (<1sec) in both single or multi-channel configurations, enabling significant reagent cost-savings and time-saving.The P-OEM Module design is cost-e?ective and it relies on the patented and field- tested pressure-based FastabTM technology.• Drop-based microfluidics• Drug discovery• Drug encapsulation• DNA analysis• Organ-on-chip• Cell culture• Single cells• Emulsions (cosmetics, foods, …)• Micro-reaction technology• Rheology• and many moreThe Microfluidic Flow Manager Unit P-OEM series o?ers excellent response time, pulseless and highly stable flow conditions for industrial precision microfluidic applications in replacement to conventional syringe pumps or peristaltic pumps.DATASHEET V1.0 || JUNE 2013SUBJECT TO MODIFICATIONS WITHOUT NOTICECase 4 : MULTI CHANNELS – WITH FLOW-RATE CONTROLMicrochipEmbedded calculator(FRCM software)FlowsensorunitFlowsensorunitFlowsensorunitFlowsensorunitP-OEM-4CPressureInletFASTABCPUPressuresensorFASTABCPUPressuresensorFASTABCPUPressuresensorFASTABCPUPressuresensorCase 3 : MULTI CHANNELS – NO FLOW-RATE CONTROLMicrochipP-OEM-4CFASTABCPUPressuresensorFASTABCPUPressuresensorFASTABCPUPressuresensorPressureInletFASTABCPUPressuresensorCase 1 : SINGLE CHANNEL – NO FLOW-RATE CONTROLP-OEM-1CFASTABCPUPressuresensorPressureInletMicrochipCase 2 : SINGLE CHANNEL – WITH FLOW-RATE CONTROLEmbedded calculator(FRCM software)P-OEM-1CFASTABCPUPressuresensorPressureInletMicrochipFlowsensorunitDATASHEET V1.0 || JUNE 2013SUBJECT TO MODIFICATIONS WITHOUT NOTICEFOR ANY FURTHER INQUIRY, PLEASE CONTACT US AT: FLUIGENT SA || WWW.FLUIGENT.COM || CONTACT@FLUIGENT.COM || +33 1 77 01 82 681 - Negative pressure available. Furthermore, positive & negative pressure can be applied on di?erent channels of the same P/PL-OEM module2 - Settling time is output volume dependent3 - Other protocols RS485 based available on request4 - Settling time is output volume dependent5 - Available with Flow sensor unitPressure control performances Pressure ranges : • 0-0.4 psi1 • 0-1 psi1 • 0-5 psi1Pressure sensor resolution : 0.03% Full ScaleSettling time : 100 ms2Pneumatic interface Input pressure requirements depend on system character-istics (number of units, pressure range, positive or negative pressure…)Neutral gaz, oil free, dry Speedfit® connectors • 0-15 psi1 • 0-100 psiFlow-rate control performances (with optional Flow Sensor Unit & optional Flow Rate Control Module software) Flow-rate ranges : • 0 to ±1.5 µl/min • 0 to ±7 µl/min • 0 to ±50 µl/minFlow-rate stability: 0.2% CVSettling time4: <1sSelf assessment of the fluidic systemSelf-compensation of drifts due to environmental variations (temperature, hydrodynamic pressure, partial clogging,…)Electrical & mechanical characteristics Power input : 24 VDCCurrent input : P-OEM : 0.5A / PL-OEM : 1AElectrical connector : screw terminalsProtocol : USB3Electrical connector : screw terminalsExternal monitoring Pressure control and monitoringFlow-rate control and monitoring5Multi-channel flow rate control with any level of channel couplingLiquid temperature monitoring5High rate data logging (100 ms)Capability to customize the fluidic process control clogging detection, temperature drift)External device synchronization• 0 to ±1 ml/min • 0 to ±5 ml/min