Purafil - Odormix SP - Media Demonstrate - Brochure

M E D I A S P E C I F I C AT I O NPurafil ESD’s Odormix™ SP Media shall consist ofan equal mix (by volume) of Purafil ESD’sOdoroxidant™ SP Media and Odorkol™ Media.Odoroxidant™ SP Media shall be manufacturedof generally spherical, porous pellets formedfrom a combination of powdered activated alu-mina and other binders, suitably impregnatedwith sodium permanganate to provide optimumadsorption, absorption and oxidation of a widevariety of gaseous contaminants. The sodiumpermanganate shall be applied during pellet for-mation, such that the impregnant is uniformlydistributed throughout the pellet volume and istotally available for reaction. The Odorkol™Media shall be a premium grade, activated car-bon with a high surface area available foradsorption.D I S P O S A L R E Q U I R E M E N T SSpent Odormix™ SP Media should be disposed ofaccording to local, state and federal guidelines.A D V A N TA G E S• Landfill disposable• UL Classified Class 1• Medias are pre-mixed at Purafil’s factory• Substitutes for a two-pass media factory system• New and spent media is non-toxicODORMIX SP MEDIA demonstrate a higher working capacity for broad-spec-trum oxidation of contaminants in actual field conditions, where multiple gaschallenges are present. The Purafil SP Series has been specially engineered tocontain more permanganate (the active ingredient) for increased removalcapacity, allowing the media to remain more available for removal of targetgases. Purafil ESD’s Odormix™ SP (patent-pending) Media offers broad spectrumremoval of odorous gases related to sewerage treatment operations.ODORMIX SP MEDIAP H Y S I C A L P R O P E R T I E SODORMIX™ SP MEDIA BULK DENSITY:40 lbs/ft3 (0.64 g/cc) +5%.Odoroxidant™ SP Media shall have the followingphysical properties:• Moisture Content: 35% Maximum• Crush Strength: 35% - 70% • Abrasion: 4.5% Maximum• Bulk Density: 50 lbs/ft3 (0.8 g/cc) +5%• Nominal Pellet Diameter: 1/16" - 1/8”(1.5 mm - 3.2 mm)• Sodium Permanganate Content:12% Min.Odorkol™ Media shall have the following physi-cal properties:• Moisture Content: 2%• CTC: 60% Minimum• Base Material: Activated Carbon• Bulk Density: 30 lbs/ft3 (0.48 g/cc) +5%• Pellet Diameter: 4mmFIRSTIN CLEANAIR2654 Weaver Way Doraville, Georgia, 30340, U.S.A. tel: (770) 662-8545 (800)-222-6367 www.purafil.comwww.puraf i l . comPRODUCTSPECIFICATION 4ODORMIX TM SP MEDIA© Purafil 2006 ProdSpec - Purafil ESD Odormix SP - 01A P P L I C AT I O N SPurafil ESD’s Odormix™ SP Media isdesigned for broad spectrum removal ofodorous gases, including mercaptans,hydrocarbons, hydrogen sulfide and sulfurdioxide. Odormix™ SP Media is recom-mended when space within Purafil ESD’smulti-stage scrubber is limited; in thisapplication, Odormix™ SP substitutes fortwo media passes. Odormix™ SP is alsorecommended as a polishing media.A P P L I C AT I O N G U I D E L I N E SOdormix™ SP Media shall perform effec-tively under the following conditions andguidelines:• Temperature: -4°F to 125°F (-20°C to 51°C)• Humidity: 10 - 95% RH• Airflow: Odormix™ SP Media shall beeffective in Purafil ESD systems, includingthe Drum Scrubber with airflows from 100to 1,000 CFM (170 to 1699 m3/hr), TubScrubber with airflows from 500 to 6,000CFM (850 to 10,194 m3/hr) and Deep BedScrubber with airflows from 600 to 8,000CFM (1,020 to 13,592 m3/hr). Odormix™SP Media shall also be effective in VesselScrubbers with airflows from 8,000 to20,000 cfm (13,592 to 33,980 m3/hr).