Purafil - Select CP Blend Media - Brochure

Purafil, Inc. … Your SingleSource• Media Manufacturing• Equipment Design & Manufacturing• Laboratory Analysis & Testing Services• Monitoring Instruments & ProgramsMedia SpecificationPurafil® Select CP Blend Media shallconsist of an equal mix (by volume) ofPurafil® Select Chemisorbant Mediaand Purakol® activated carbon media.The Purafil® Select ChemisorbantMedia shall be manufactured, general-ly spherical, porous pellets formedfrom a combination of powdered acti-vated alumina and other binders, suit-ably impregnated with potassium per-manganate to provide optimumadsorption, absorption and oxidationof a wide variety of gaseous contami-nants. The potassium permanganateshall be applied during pellet forma-tion, such that the impregnant is uni-formly distributed throughout the pelletvolume and is totally available for reac-tion.The Purakol® Media shall be an acti-vated carbon for the control of hydro-carbons with a high surface area avail-able for adsorption.Physical PropertiesPurafil® Select Chemisorbant Media• Moisture Content: 35% Maximum• Crush Strength: 35% - 70% • Abrasion: 4.5% Maximum• Bulk Density: 50 lbs/ft3 (0.8 g/cc) +5%• Nominal Pellet Diameter: 1/8" (3.175mm)• Potassium Permanganate Content: 8% Min.Purakol® Media• Moisture Content: 2% • CTC: 60% Minimum• Base Material: Activated Carbon• Bulk Density: 30 lbs/ft3(0.48 g/cc) +5%• Nominal Pellet Diameter: 4mmPurafil® Select CP Blend Media • Bulk Density: 40 lbs/ft3 (0.64 g/cc) +5%Quality ControlPurafil® Select CP Blend Media shallbe submitted to the following qualitycontrol tests before shipment:• CTC• Moisture ContentApplication GuidelinesPurafil® Select CP Blend Media shallperform effectively under the followingconditions and guidelines:• Temperature: -4° F to 125° F-20° C to 51° C• Humidity: 10 - 95% RH• Airflow: Purafil® Select CP Blend Media shall be effective in indus-trial systems with airflows rangingfrom less than 25 CFM (42.5 m3/hr)to over 100,000 CFM (169,920 m3/hr) and with velocities from 60 FPM to 500 FPM (0.30 to 2.54 m/s).•Media Performance: Purafil®Select CP Blend Media shall be designed for 99.5% min. removal efficiency in Purafil systems.• Media Life: Regular media sam-ples of Purafil® Select CP Blend Media shall be taken for projectingremaining media life, providing scheduled maintenance, and ensuring performance.Installation and DisposalRequirements• Installation: Installers shall use dust masks, safety goggles, and rubber gloves.. • Disposal: Spent Purafil Select CPBlend Media should be disposed of according to local, state and federal guidelines.Purafil® Select CP Blend MediaPurafil, Inc. • 2654 Weaver Way • Doraville, Georgia 30340 • Phone: (770) 662-8545 • Fax: (770) 263-6922 • www.purafil.comFor removal of toxic, odorous, and corrosive gases.Additional Information on BackAdvantages• Effective against a broad range of contaminant gases• Documented removal capaci-ties ensure proper system design• Media life analysis projects remaining media life for proper maintenance and optimum media performance• UL Classified Class 1• Simple media replacement • Media are factory mixed• Use in place of a two-pass media systemTarget Contaminants• Hydrocarbons• VOCs• Oxides of sulfur• Formaldehyde• Nitric oxide• Hydrogen sulfide• Lower molecular weight aldehydes and organic acidsPurafil® Select CP Blend MediaFor removal of toxic, odorous, and corrosive gases.