Roll Off Sludge Mate

• Grease Trap Waste • Septic Tank Waste • Digested Sludge • Alum SludgeDesigned to Dewater®Sludge Mate®SizeRoll-Off Sludge MateBeginning Waste% of SolidsBeginning WasteVolumeVolumeReductionDewatered WasteVolumeProcessingTime2 - 3% 10,000 Gallons 24 Hours 8 - 10 Cu Yards 80 - 85%Dewatered Waste% of Solids12 - 16%The Sludge Mate is used along with polymer to dewater various types of waste. The polymer is mixed with the waste, then the mixture is processed through the Sludge Mate . The Sludge Mate has filters that retain the solids and allow the water to pass through the filters and out the drainage ports. The clear liquid is not treated water and must be disposed of properly. Once the sludge has been dewatered for between 12 and 24 hours, it will pass the paint filter test and will be ready for disposal.®® ®Sample Application**Note: Individual application results, as well as processing capacity depends on % of solids in the sludgeAvailablein sizes ranging from 15 cu. yd. to 40 cu. yd. Units can be equipped with a closed roof with hatchways, a tarp , an open top, or a sliding lid. Roll-Off units are designed to be handled by a roll-off hoist truck. They are of rectangular design and have a filter panel on each wall and one in the center extending the length of the container.®Sludge MateProcessing CapabilitiesSludge Mate®SizeAmount of sludgeprocessed per day 5 cu. yd. . . . . . . 5,000 gallons 7 cu. yd. . . . . . . 7,000 gallons12 cu. yd. . . . . . . 12,000 gallons15 cu. yd. . . . . . . 15,000 gallons20 cu. yd. . . . . . . 20,000 gallons25 cu. yd. . . . . . . 25,000 gallons30 cu. yd. . . . . . . 30,000 gallons40 cu. yd. . . . . . . 40,000 gallons® ROSM page 1 small.pdf Sludge Mate Presentation Drawing.pdf Model