Roofing/Insulating Panels 180 HD- Brochure

E-PROD109A.inddNOTE : SOPREMA INC. may modify the composition and/or utilization of its products without prior notice. TECHNICAL DATA SHEET140218SCAN1E(supersedes -1304092SCAN1E) DESCRIPTION SOPRASMART ISO HD 180 is a high performance support panel composed of SBS modified bitumen membrane with of a non-woven polyester reinforcement, factory-laminated on a HD polyisocyanurate insulation board. The surface is covered with a thermofusible film. INSTALLATIONBITUMENSOPRASMART ISO HD 180 panel is intalled in a bed of hot bitumen applied with a mop.ADHESIVESOPRASMART ISO HD 180 panel is adhered with adhesive COLTACK or DUOTACK. MECHANICALLY FASTENEDSOPRASMART ISO HD 180 panel is mechanically fastened to steel deck with SOPRAFIX screws and plates.• Mechanical fasteners must be installed on the distinctive line of the membrane side selvedge.• On a steel deck, fasteners must be installed on the upper part of the steel ribs. Install membranes perpendicular to the ribs.* For more details about the required number of adhesive or mechanical fasteners, consult the Wind Uplift Resistance Testing reports according to Canadian standard CSA A123.21-10 or publications according to FM 4470 (RoofNav Database) including recommendations for corners and perimeters listed in the PLPDS 1-29 from Factory Mutual.DUO SELVEDGEOver the entire width of DUO SELVEDGE, 60 % of the surface is self-adhesive, which protects components under the base sheet. The remaining surface of the selvedge (40 %) is covered by a thermofusible plastic film to seal overlap by heat-welding with a propane torch or with the SOPRAMATIC automatic hot-air welder.FOR COMPLETE INFORMATION ON PRODUCT INSTALLATION, PLEASE CONSULT YOUR SOPREMA REPRESENTATIVE.PACKAGING Specifications SOPRASMART ISO HD 180Total thickness (Membrane & Board) 15 mm (19/32 in)Membrane reinforcement Non-woven polyesterInsulation dimensions 0.914 m x 2.44 m (3 ft x 8 ft)Total weight 4.5 kg/m2 (1.0 lb/ft2)Selvedge width 75 mm (3 in)Surface Thermofusible film Underface Polyisocyanurate HDUnits per skid 70(All values are nominal)1/2SOPRASMART ISO HD 180E-PROD109A.inddNOTE : SOPREMA INC. may modify the composition and/or utilization of its products without prior notice. 2/2PROPERTIESProperties Standards MembraneMembrane thickness - 2.2 mm (86.6 mil)Breaking strength, MD/XDCAN/CGSB-37.56-M, 9th draft17.0 / 12.5 kN/mUltimate elongation, MD/XD CAN/CGSB-37.56-M, 9th draft 60 / 65 %Tear etrength ASTM D5601 60 NCold bending - Initial - 90 days at 70 °CCAN/CGSB-37.56-M, 9th draft-30 °C (-22 °F)-30 °C (-22 °F)(All values are nominal)Properties Standards POLYISOBoard thickness - 12.7 mm (1/2 in)Thermal resistance (R-Value) at 24 °C (75 °F) ASTM C 518 RSI 0.44 (R-2.5)Compressive strength ASTM D 1621 > 689 kPa (90 psi)Dimensional stability ASTM D 2126 < 0.5 % linear changeWater absorption ASTM C 209 < 3 % volumeResistance to mold ASTM D 3273 Passed(All values are nominal)SOPRASMART ISO HD 180TECHNICAL DATA SHEET140218SCAN1E(supersedes -1304092SCAN1E)