Series Resistance Heating Cables- Brochure

Table of contentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 .02Type ELP/SI constant wattage heating cable up to 200 °C . . . . . . . . . . . . . . . . . . . . 1 .03Type ELP/SI-F constant wattage heating cable up to 200 °C . . . . . . . . . . . . . . . . . . . . 1 .05Type ELP/PFA constant wattage heating cable up to 260 °C . . . . . . . . . . . . . . . . . . . . 1 .07Type ELP-FEP constant wattage heating cable up to 200 °C . . . . . . . . . . . . . . . . . . . . 1 .09EL-Point please see chapter ‘Special Heating Systems’ Type ELKM-AS heating cable up to 260 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .11Type ELKM-AE heating cable up to 260 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .13Type ELKM-AG-L heating cable up to 260 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .15 Type ELKM-AG-N heating cable up to 260 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .17Type ELKM-AG-H heating cable up to 260 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .19Type ELK-AE heating cable up to 260 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .21Type ELK-AG-L heating cable up to 260 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .23Type ELK-AG-N heating cable up to 260 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .25Type ELW-GN heating tape up to 260 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .27Type ELW-VA heating tape up to 260 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .29Type ELK-H heating cable up to 450 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .31Type ELK-HS heating cable up to 450 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .33Type ELW-H heating tape up to 450 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .35Type ELW-HS heating tape up to 450 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .37Type ELK-Q heating cable up to 900 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .39Type ELW-Q heating tape up to 900 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .41Type ELK-MI/VA heating cable up to 600 °C . . . . . . . . . . . . . . . . . . . . . . . . . 1 .43Type ELK-MI/INC heating cable up to 1000 °C . . . . . . . . . . . . . . . . . . . . . . . . 1 .45Type ELW-3-FEP/PVC heating tape up to 90 °C . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 .47EL-RAIL please see chapter ‘Special Heating Systems’ Coil wareGost: Approval for the Russian marketFactory terminatedCertified according to VDE standardsCertified according to IECEx-scheme1.01 heating cables and heating tapes 07/2014 – All rights reserved. Subject to change without notice.Products marked with the -symbol can be used in hazardous areas . The tempe-ratures allocated to the products are the maximum permissible exposure tempe-ratures . Our project engineers will be glad to assist you to design and dimension electrical heat tracing systems . Moreover, we have prepared a questionnaire which helps you to record operating data and enable correct dimensioning and allocation . We would be happy to send you the questionnaires for the respective product, to elaborate a customized solution for your application and to submit you our offer . All products listed in the catalogue are available ex stock (subject to prior sale) . All pro-ducts offered in this catalogue can also be manufactured by eltherm® using different dimensions, outputs and voltages . Furthermore, please note: All products listed in this catalogue shall only be connected and commissioned by a qualified electrician . All applicable local electrical and safety regulations must be observed during installation and operation . Normally, electrical heating systems require a temperature control unit as it is only possible to ensure that the exposure temperatures for the electrical hea-ting and products to be heated are not exceed if such a unit is used . As a general rule, the following specifications of the standards EN 60519-1-2-10 and EN 62395-1 shall be respected for the operation of electrical heatings . We recommend to use a temperature control system in conjunction with a sta-bilized system design or a temperature limiter to avoid damages to persons and material . In accordance with EN 62395-1 and EN 60519-10, residual current devices (RCDs) are to be provided in order to disconnect from the mains in good time and to avoid consequential damages Attention: heating cable and heating tape may neither intersect nor come into contact . There is the danger of burnout due reciprocal heating up (except: type ELSR ) . Our general assembly and operating instructions for this product are valid for the use of the heating cables . Specifications and advertising messages in this products and services catalogue, irrespective of their nature, in particular descriptions, illustrations, drawings, samples, information pertaining to quality, condition, composition, performance, consumption and usability as well as dimensions and weights of the product range remain subject to change in as far as they are not expressly declared as binding . They do not denote any assurance or guarantee whatsoever . Minor deviations from the product specifications shall be deemed approved in as far as they are not unrea-sonable for the buyer .We explicitly reserve the right to amend errors and alter technical data .Important informationeltherm® - A reliable and competent partner with several years’ experience in the field of electrical heat tracing . You wish to transfer heat to the media or compensate heat loss? eltherm® provides the solution .Our well-founded and expert knowledge, which is based on state-of-the-art technology, is always available to you . Quality is both produced and lived at eltherm® . Moreover, we have achieved DIN ISO 9001:2008 and ISO 14001 certification .The latest IT, planning and testing systems ensure quality and timely manufacturing processes .In close collaboration with the customers, eltherm® develops individually tailored solutions, supporting them when plan-ning, proposing and assembling electrical heating systems . A perfected, high-quality product program enables eltherm® to find the most reasonable economical solution for you . Our results are convincing .Self-regulating heating cablesHeated hoses Heating mats Heating jacketsSpecial heating systems (for antennas, tank- containers, vessels . .)Control units, automatic control units, monitoring units and regulator systemsFurther documents are available with information about our high-quality products: heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.021.02 heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.comApplications: Vessels, piping, valves Food processing industry Frost protection and temperature maintenance on pumps, etc .Type ELP/Si up to 200 °CAdvantages: Single end connection Can be cut off the roll Constant power output per meter Highly flexibleThe installation of this heating cable is highly cost-efficient with any kind of heat tracing application thanks to the single end power input . The heating cable consists of a succession of heating zones (length = contact spacing) and can be cut to length in sections of the contact distance to the requi-red length . When cutting into lengths, the heating circuit is interrupted up to the next contact point and this non-active part can be used as a cold lead . During the design phase, one contact spacing length per planned heating circuit must be calculated additionally . with resistance wireConstant wattage heating cable1.03 heating cables and heating tapes 1.0307/2014 – All rights reserved. Subject to change without notice.Type ELP/Si up to 200 °C Heating cable und Heizbänder1.04Bus wire 2. InsulationHeating conductor1. Insulation Outer jacket siliconeProtective braidConstant wattage heating cables up to nominal voltages of 120 V or 400 V are available upon request . Bus wire cross section 2 x 2 mm² upon request .Technical information Insulation silicone Outer jacket silicone Protective braid copper Bending radius, min . 30 mm Bus wire cross section 2 x 1,5 mm2 Moisture proof yes Nominal voltage 230 V AC/DCDataType Nominal outputDimensions approx. (mm)Contact spacing (m)Art. No.ELP/Si 10 BO 230 10 W/m 5,25 x 9,75 1,0 0320102ELP/Si 20 BO 230 20 W/m 5,25 x 9,75 1,0 0320108ELP/Si 30 BO 230 30 W/m 5,25 x 9,75 1,0 0320114ELP/Si 40 BO 230 40 W/m 5,25 x 9,75 1,0 0320120Contact point Contact point Contact pointContact point Contact pointActive heating cableBus wireProtective braidLNPEHeating zone 1 m Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.04Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . For suitable connection and termination kits please note our considerab-le accessories catalogue unit .Type W/m Length (m) at 50 °CLength (m) at 150 °CELP/Si 10 BO 230 10 198 147ELP/Si 20 BO 230 20 139 102,5ELP/Si 30 BO 230 30 98 82,5ELP/Si 40 BO 230 40 73,5 70,5 heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.04Applications: Vessels, piping, valves Food processing industry Frost protection and temperature maintenance on pumps, etc . Filter heating systemsType ELP/Si-F up to 200 °CAdvantages: Single end connection Can be cut off the roll Constant power output per meter Highly flexibleThese heating cables are particularly suitable for maintaining temperatures of up to +150 °C . Its great flexibility down to - 70°C means that this version is ideal for heat tracing in industrial refrigeration or in countries with very harsh climates .The heating cable consists of a succession of heating zones (length = contact spacing) and can be cut to length in sections of the contact distance to the required length . When cutting into lengths, the heating circuit is interrupted up to the next contact point and this non-active part can be used as a cold lead . During the design phase, one contact spacing length per planned heating circuit must be calculated additionally . with resistance wireConstant wattage heating cable heating cables and heating tapes heating cables and heating tapes 1.0507/2014 – All rights reserved. Subject to change without notice.Type ELP/Si-F up to 200 °C Heizkabel und Heizbänder1.04Bus wire 2. InsulationHeating con-ductor1. Insulation Outer jacket fluoro- polymer (ELP-Si-F-BOT)Protective braid copper/zincTechnical details Insulations silicone Protective braid copper/zinc Nominal voltage 230 V AC/DC or 400 V AC/DC Dimensions 6,5 x 10,5 mm Permissible ambient -70 . . .+200 temperature Bus wire cross section 2 mm2Data ELP/SI-F-BMaximum heating circuit lenghtType Nominal output (W/m)Contact spacing (m)Maximum heating circuit length (m)Maximum holding tempera-ture °CNominal voltage (V)Art. No.ELP/Si F 20 B 20 0,7 140 150 230 0320210ELP/Si F 30 B 30 0,7 120 140 230 0320211ELP/Si F 40 B 40 0,6 100 120 230 0320212ELP/Si F 40 B 40 1,0 100 120 400 0320312ELP/Si F 20 BOT 20 0,7 140 150 230 0320220ELP/Si F 30 BOT 30 0,7 120 140 230 0320221ELP/Si F 40 BOT 40 0,6 100 120 230 0320222ELP/Si F 40 BOT 40 1,0 100 120 400 0320322Contact point Contact point Contact pointContact point Contact pointActive heating cableBus wireProtective braidLNPEHeating zone 1 m*given an utilization of 80 % 16 A and 10 % vol-tage drop . Insulations silicone Outer jacket fluoropolymer Protective braid copper/zinc Nominal voltage 230 V AC/DC or 400 V AC/DC Dimensions 7 x 10,5 mm Permissible ambient -70 . . .+200 temperatureData ELP/Si-F-BOT Bus wire cross section 2 mm2 heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.comCables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . For suitable connection and termination kits please note our considerable accessories cata-logue unit .Constant wattage heating cables up to no-minal voltages of 120 V or 400 V are available upon request . Bus wire cross section 2 x 2 mm² upon request . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.06Type ELP/PFA up to 260 °CAdvantages: Single end power input Can be cut off the roll Constant power output per meter Long life cycle Laying without exact measuring possible High chemical resistance UV resistanceApplications: Vessels, piping, valves Building construction Food processing industry Paper industryThese parallel heating cables offer tremendous flexibility in use, as they can easily be cut to the required length off the roll, with the assurance of constant power output . There is no need for a connecting cable, and input can be unilateral . It is quick and easy to assemble; this saves a lot of time, and as a result reduces cost considerably . Since output of up to 60 W/m is possible for lengths laid to piping, ELP paral-lel heating cables are particularly suitable for piping with high output requirements, such as in industrial process technology . The particularly temperature-resistant outer shell in PFA and the high level of che-mical resistance of the PFA ensure a long useful life . with resistance wire Heating cable und Heizbänder 1.07Constant wattage heating cable heating cables and heating tapes 1.0707/2014 – All rights reserved. Subject to change without notice.Type ELP/PFA up to 260 °CBus wire 1,5 mm22. InsulationHeating conductorProtective braid nickel-plated copperBus wire cross section 2 x 2 mm² upon request .Technical information Insulation PFA Protective braid nickel-plated copper Outer jacket PFA Nominal temperature 260 °C Moisture proof yes Bending radius, min . 25 mm Bus wire cross section 2 x 1,5 mm2 Nominal voltage 230 V AC/DCDataContact point Contact point Contact pointContact point Contact pointActive heating cableBus wireProtective braidLNPEHeating zone 1 mType Nominal outputWorking temp.maxDimensions approx. (mm) Contact spacing (m)Art. No.ELP/PFA 15 BOT 15 W/m 205°C 8,0 x 5,5 1,0 B0332015ELP/PFA 30 BOT 30 W/m 190°C 8,0 x 5,5 1,0 B0332030ELP/PFA 45 BOT 45 W/m 175°C 8,0 x 5,5 1,0 B0332045ELP/PFA 60 BOT 60 W/m 160°C 8,0 x 5,5 1,0 B0332060Maximum heating circuit lenghtType W/m Length (m) at 50 °CLength (m) at 150 °CELP/PFA 15 BOT 15 161 119ELP/PFA 30 BOT 30 98 82,5ELP/PFA 45 BOT 45 65,5 65,5ELP/PFA 60 BOT 60 50 50 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.08Outer jacket PFA1. Insulation3. InsulationCables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . For suitable connection and termination kits please note our considerab-le accessories catalogue unit .Standards Manufactured according to DIN VDE 0721-52 EN 62395-1; 2007-05 VDE mark approval 40034503 Certificates 12ATEX1438U IECEx EPS 12 .0009U Classification II 2G Ex e IIC Gb II 2D Ex tb IIIC Db heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.08Type ELP/FEP up to 200 °CAdvantages: Single end power input Can be cut off the roll Constant power output per meter Long life cycle Laying without exact measuring possible High chemical resistance UV resistanceApplications: Vessels, piping, valves Building construction Food processing industry Paper industryThese parallel heating cables offer tremendous flexibility in use, as they can easily be cut to the required length off the roll, with the assurance of constant power output . There is no need for a connecting cable, and input can be unilateral . It is quick and easy to assemble; this saves a lot of time, and as a result reduces cost considerably . Since output of up to 60 W/m is possible for lengths laid to piping, ELP paral-lel heating cables are particularly suitable for piping with high output requirements, such as in industrial process technology . The particularly temperature-resistant outer shell and the high level of chemical resistance ensure a long useful life . with resistance wireConstant wattage heating cable Heizkabel und Heizbänder 1.09 heating cables and heating tapes 1.0907/2014 – All rights reserved. Subject to change without notice.Type ELP/FEP up to 200 °CBus wire 1,5 mm22. InsulationHeating conductor Protective braid nickel-plated copperBus wire cross section 2 x 2 mm² upon request .Technical informationDataContact point Contact point Contact pointContact point Contact pointActive heating cableBus wireProtective braidLNPEHeating zone 1 mType Nominal outputWorking temp.maxDimensions approx. (mm) Contact spacing (m)Art. No.ELP/FEP 15 BO 15 W/m 195°C 8,0 x 5,5 1,0 B033201501ELP/FEP 30 BO 30 W/m 180°C 8,0 x 5,5 1,0 B033203001ELP/FEP 45 BO 45 W/m 165°C 8,0 x 5,5 1,0 B033204501ELP/FEP 60 BO 60 W/m 150°C 8,0 x 5,5 1,0 B033206001Maximum heating circuit lenghtType W/m Length (m) at 50 °CLength (m) at 150 °CELP/FEP 15 BO 15 161 119ELP/FEP 30 BO 30 98 82,5ELP/FEP 45 BO 45 65,5 65,5ELP/FEP 60 BO 60 50 50Outer jacket fluoropolymer1. Insulation3. InsulationStandards Manufactured according to DIN VDE 0721-52 EN 62395-1; 2007-05 VDE mark approval 40034503 Insulation fluoropolymer Protective braid nickel-plated copper Outer jacket fluoropolymer Nominal temperature 200 °C Moisture proof yes Bending radius, min . 25 mm Bus wire cross section 2 x 1,5 mm2 Nominal voltage 230 V AC/DCCables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . For suitable connection and termination kits please note our considerab-le accessories catalogue unit . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.10Type ELKM-AS up to 260 °CAdvantages: Highly flexible Small bending radius High operation temperature High chemical resistance Moisture proofApplications: Vessels, pipes, valves Small components Can be used in many industrial areas Rotor blades Marble platesUse on apparatus, vessels, pipes, valves, etc ., in which low bending radii also allow compact tracing on small components across the entire surface . We recommend our heating cable ELKM-AE with protective braid AE for unprotected use in corrosive environment .This heating cable is also available without braid under the name ELKM-A – just ask us .with protective braid Cu/NiPTFE insulated heating cable Heating cable und Heizbänder 1.11 heating cables and heating tapes 1.1107/2014 – All rights reserved. Subject to change without notice.Protective braid nickel-plated copperHeating conductor stran-ded or spirally woundInsulation PTFE*Note: The output per meter of heating cable and the maximum possible operating temperatures depend on the respective application . For indi-vidual cases, we recommend that you contact our engineers – we will be pleased to advise you . Manufactured according to DIN VDE 0253Technical informationStandards Insulation PTFE Protective braid nickel-plated copper Nominal voltage max . 750 V Output, max . 30 W/m* Operating temp ., max 260 °C Bending radius, min . 2,5 x outer diameter Installation temp ., min . -60 °C Moisture proof yes Heat conductor stranded, spirally wound for nomi- nal resistance > 8,000 ?/kmDataType ELKM-AS up to 260 °CNominal resi-stance O/kmOuter dia-meter ap-prox. (mm)Weight approx. (g/m)Tempera-ture coef-ficient (x 10¯³/K) Art. No.1,95 (Cu 10 mm2) 7,11 157,0 4,30 01370002,90 (Cu 6 mm2) 5,99 104,9 4,30 01370024,4 (Cu 4 mm2) 4,73 69,8 4,30 01370047,20 (Cu 2,5 mm2) 3,89 48,3 4,30 013700710 3,62 40,6 4,30 013700911,70 (Cu 1,5 mm2) 3,53 37,6 4,30 0137010 15 3,20 33,6 4,30 0137012 25 3,15 31,1 3,00 0137016 31,5 3,55 38,6 1,60 0137020 50 3,15 31,3 1,60 0137030 65 3,04 28,6 1,60 0137032 80 3,32 34,5 0,90 0137038100 3,11 31,0 0,90 0137042157 3,10 31,2 0,45 0137045180 2,84 25,8 0,90 0137052200 2,98 28,2 0,45 0137054260 2,87 26,3 0,45 0137058Nominal resi-stance O/kmOuter dia-meter ap-prox. (mm)Weight approx. (g/m)Tempera-ture coef-ficient (x 10¯³/K) Art. No. 280 2,76 24,3 0,38 0137060 328 3,13 30,6 0,18 0137061 360 2,71 23,7 0,45 0137064 430 2,96 27,6 0,18 0137266 480 2,94 26,8 0,18 0137069 600 2,80 24,9 0,18 0137213 800 2,69 23,2 0,18 01370801000 2,81 24,9 0,04 01370821470 2,64 22,6 0,04 01372141750 2,66 22,3 0,04 01370941900 2,84 25,6 0,40 01372152900 2,68 23,1 0,40 01372194000 2,61 21,9 0,40 01371144700 2,55 21,6 0,15 01371186000 2,49 20,6 0,20 01372377000 2,43 19,9 0,15 01371268000 2,41 19,7 0,15 0137128For suitable connection and termination kits please note our considerab-le accessories catalogue unit . Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.12For applications with fixed external diameter, please contact our engi-neers first . Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . Weight tolerances are possible for manufacturing reasons . Nominal resistances up to 1,500,000 ?/km upon request . Resistance tolerance: +/- 5 % . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.12Type ELKM-AE up to 260 °CAdvantages: Highly flexible Small bending radius High operation temperature High chemical resistance Moisture proofApplications: Vessels, pipes, valves Small components Industrial applications Heat tracing on molds Heat tracing on antenna IBC’sUse on apparatus, vessels, pipes, valves, etc ., in which low bending radii also allow compact tracing on small components across the entire surface . This heating cable is also available without braid under the name ELKM-A – just ask us . Heating cable und Heizbänder 1.13PTFE insulated heating cablewith protective braid VA heating cables and heating tapes 1.1307/2014 – All rights reserved. Subject to change without notice.*Note: The output per meter of heating cable and the maximum possi-ble operating temperatures depend on the respective application . For individual cases, we recommend that you contact our engineers – we will be pleased to advise you . Manufactured according to DIN VDE 0253Technical informationStandards Insulation PTFE Protective braid VA 1 .4401 Nominal voltage max . 750 V Output, max . 30 W/m* Operating temp ., max . 260 °C Bending radius, min . 2,5 x outer diameter Installation temp ., min . -60 °C Moisture proof yes Heat conductor stranded, spirally wound for nomi- nal resistance > 8,000 ?/kmDataType ELKM-AE up to 260 °CFor suitable connection and termination kits please note our considerab-le accessories catalogue unit .Protective braid VA 1.4401Heating conduc-tor stranded or spirally woundInsulation PTFENominal resi-stance O/kmouter dia-meter ap-prox. (mm)Weight approx. (g/m)Temperature coefficient (x 10¯³/K) Art. No.1,95 (Cu 10 mm2) 6,97 130 4,30 01370012,90 (Cu 6 mm2) 5,83 100 4,30 01370034,4 (Cu 4 mm2) 4,57 70 4,30 01370057,20 (Cu 2,5 mm2) 3,73 50 4,30 013700610 3,46 30 4,30 013700811,70 (Cu 1,5 mm2) 3,37 30 4,30 0137011 15 3,04 30 4,30 0137013 25 2,99 30 3,00 0137017 31,5 3,39 30 1,60 0137021 50 2,90 22,2 1,60 0137031 65 2,88 19,6 1,60 0137033 80 3,16 25,4 0,90 0137039100 2,95 22,0 0,90 0137043157 2,94 22,1 0,45 0137044180 2,68 17,0 0,90 0137053200 2,82 19,3 0,45 0137055260 2,71 17,4 0,45 0137059Nominal resi-stance O/kmouter dia-meter ap-prox. (mm)Weight approx. (g/m)Temperature coefficient (x 10¯³/K) Art. No. 280 2,60 15,6 0,38 0137230 328 2,97 21,5 0,18 0137231 360 2,55 14,9 0,45 0137084 430 2,80 18,7 0,18 0137067 480 2,78 17,9 0,18 0137068 600 2,64 16,1 0,18 0137232 800 2,53 14,5 0,18 01370811000 2,65 16,2 0,04 01370831470 2,48 13,9 0,04 01372331750 2,50 13,6 0,04 01372341900 2,68 11,6 0,40 01372352900 2,52 14,4 0,40 01371044000 2,45 13,3 0,40 01371154700 2,39 12,6 0,15 01371196000 2,33 12,0 0,20 01372367000 2,27 11,4 0,15 01371278000 2,25 11,1 0,15 0137121 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.14For applications with fixed external diameter, please contact our engi-neers first . Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . Weight tolerances are possible for manufacturing reasons . Nominal resistances up to 1,500,000 ?/km upon request . Resistance tolerance: +/- 5 % . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.14Type ELKM-AG-L up to 260 °CAdvantages: Factory terminated High chemical and mechanical resistance Can be used in all industrial areas High operation temperature Easy to install, even on complex shapes Highly flexible Resistant to steam purging Applications: e.g. Heat tracing on tanks Heat tracing on vessels Heat tracing on filters Heating satellite dishes Heat tracing on hoppers Pipe, valve and pump heating Automotive Tank containers IBC’s Heating hoodsThis versatile, factory terminated, heating cable is used for frost protection and temperature maintenance, even under highly corrosive environmental conditions which means this heating cable can be used for an extremely wide variety of applications . Heating cable und Heizbänder 1.15PTFE insulated heating cablewith protective braid + outer jacket heating cables and heating tapes 1.1507/2014 – All rights reserved. Subject to change without notice.Nominal resistance (O/km)Outer dia-meter approx. (mm)Weightapprox. (g/m)Temperature coefficient (x 10 -3 / K)Art. No.1,95 (Cu 10 mm2)7,7 156 4,30 01TT002E2,90 (Cu 6 mm2)6,4 110 4,30 01TT003E4,40 (Cu 4 mm2)5,6 85 4,30 01TT004E7,20 (Cu 2,5 mm2)4,5 53 4,30 01TT007E10,00 4,2 51 4,30 01TT010E11,70 (Cu 1,5 mm2)4,1 48 4,30 01TT011E15,00 3,9 44 4,30 01TT015E25,00 3,8 43 3,00 01TT025E31,50 4,1 45 1,60 01TT031E50,00 3,8 43 1,60 01TT050E65,00 3,6 42 1,60 01TT065E80,00 3,9 55 0,90 01TT080E100,00 3,8 53 0,90 01TT110E157,00 3,8 40 0,45 01TT115E180,00 3,5 38 0,90 01TT118E200,00 3,6 39 0,45 01TT120E260,00 3,5 38 0,45 01TT126ENominal resistance (O/km)Outer dia-meter (mm)Weightapprox. (g/m)Temperature coefficient (x 10 -3 / K)Art. No.280,00 3,4 35 0,38 01TT128E340,00 3,78 35,2 0,45 01TT134E360,00 3,3 33 0,45 01TT138E430,00 3,5 38 0,18 01TT143E480,00 3,5 39 0,18 01TT148E600,00 3,4 35 0,18 01TT160E800,00 3,3 34 0,18 01TT180E1000,00 3,4 35 0,04 01TT210E1470,00 3,2 40 0,04 01TT214E1750,00 3,2 38 0,04 01TT217E1900,00 3,5 39 0,40 01TT219E2900,00 3,3 32 0,40 01TT229E4000,00 3,2 31 0,40 01TT240E4700,00 3,2 31 0,15 01TT247E6000,00 3,2 38 0,20 01TT260E7000,00 3,2 36 0,15 01TT270E8000,00 3,2 33 0,15 01TT280EProtective braid nickel-plated copperInsulation PTFE Outer jacket PTFE Manufactured according to DIN VDE 0253Technical information Type ELKM-AG-L up to 260 °CStandards Insulation PTFE Protective braid nickel-plated copper Outer jacket PTFE Nominal voltage max . 750 V Output, max . 30 W/m* Operating temp ., max . 260 °C Bending radius, min . 2,5 x outer diameter Installation temp ., min . up to -60 °C Moisture proof yes Heat conductor stranded, spirally wound for nomi- nal resistance > 8,000 ?/km*Note: The output per meter of heating cable and the maxi-mum possible operating temperatures depend on the respec-tive application . For individual cases, we recommend that you contact our engineers – we will be pleased to advise you . For suitable connection and termination kits please note our considerable accessories catalogue unit .Data Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.16Heating conduc-tor stranded or spirally woundFor applications with fixed external diameter, please contact our engi-neers first . Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . Weight tolerances are possible for manufacturing reasons . Nominal resistances up to 1,500,000 ?/km upon request . Resistance tolerance: +/- 5 % . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.16Applications, especially in hazardous areas: e.g. Heat tracing on tanks Heat tracing on vessels Heat tracing on filters Heat tracing on hoppers Pipe, valve and pump heating Tank containers IBC’s Heating hoods Automotive Varnishing plantsType ELKM-AG-N up to 260 °CAdvantages: High chemical and mechanical resistance Can be used in all industrial areas High operation temperature Can be used in liquids Easy to install, even on complex shapes Highly flexible Resistant to steam purgingThis versatile heating cable is used for frost protection and temperature maintenance, even under highly corrosive environmental conditions . The heating cable ELKM-AG-N is suited and approved for use in hazardous areas . It is highly flexible permitting its use in many fields of application . Heating cable und Heizbänder 1.17PTFE insulated heating cablewith protective braid + outer jacket heating cables and heating tapes 1.1707/2014 – All rights reserved. Subject to change without notice.Protective braid nickel-plated copperInsulation PTFE Outer jacket PFA Manufactured according to DIN VDE 0253, EN 60079-30-1 VDE mark approval 40024940 Certificate EPS 12ATEX1466U Classification II 2G Ex e IIC Gb II 2D Ex tb IIIC Db Technical informationStandards Insulation PTFE Protective braid nickel-plated copper Outer jacket PFA Nominal voltage max . 550 V Output, max . 30 W/m* Operating temp ., max . 260 °C Bending radius, min . 2,5 x outer diameter Installation temp ., min . -60 °C Moisture proof IP68 Impact resistance 4 Joule Heat conductor stranded*Note: The output per meter of heating cable and the maxi-mum possible operating temperatures depend on the respec-tive application . For individual cases, we recommend that you contact our engineers – we will be pleased to advise you . For suitable connection and termination kits please note our considerable accessories catalogue unit .DataType ELKM-AG-N up to 260 °CNominal resistance (O/km)Outer diame-ter approx. (mm)Weightapprox. (g/m)Temperature coefficient (x 10 -3 / K)Art. No.1,95 (Cu 10 mm2) 8,1 166 4,30 01TA002E2,90 (Cu 6 mm2) 6,8 119 4,30 01TA003E4,40 (Cu 4 mm2) 6,1 96 4,30 01TA004E7,20 (Cu 2,5 mm2) 5,1 64 4,30 01TA007E10,00 4,8 59 4,30 01TA010E11,70 (Cu 1,5 mm2) 4,7 57 4,30 01TA011E15,00 4,5 50 4,30 01TA015E25,00 4,4 48 3,00 01TA025E31,50 4,7 56 1,60 01TA031E50,00 4,4 49 1,60 01TA050E65,00 4,2 46 1,60 01TA065E80,00 4,5 42 0,90 01TA080E100,00 4,4 50 0,90 01TA110E157,00 4,4 46 0,45 01TA115E180,00 4,1 42 0,90 01TA118E200,00 4,2 38 0,45 01TA120E260,00 4,1 42 0,45 01TA126ENominal resistance (O/km)Outer diame-ter approx. (mm)Weightapprox. (g/m)Temperature coefficient (x 10 -3 / K)Art. No.280,00 4,0 39 0,38 01TA128E340,00 4,1 40,1 0,45 01TA134E360,00 3,9 40 0,45 01TA138E430,00 4,1 43 0,18 01TA143E480,00 4,1 44 0,18 01TA148E600,00 4,0 40 0,18 01TA160E800,00 3,9 41 0,18 01TA180E1000,00 4,0 43 0,04 01TA210E1470,00 3,8 40 0,04 01TA214E1750,00 3,8 37 0,04 01TA217E1900,00 3,5 41 0,40 01TA219E2900,00 3,9 41 0,40 01TA229E4000,00 3,8 37 0,40 01TA240E4700,00 3,8 35 0,15 01TA247E6000,00 3,8 34 0,20 01TA260E7000,00 3,8 33 0,15 01TA270E8000,00 3,8 36 0,15 01TA280E Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.18For applications with fixed external diameter, please contact our engi-neers first . Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30mA . Please observe the standards EN 60079-30-2, EN 60519-10 . Weight tolerances are possible for manufacturing reasons . Nominal resistances up to 1,500,000 ?/km upon request . Resistance tolerance: +/- 5 % .Heating conductor stranded heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.18Applications, especially in hazardous areas: e.g. Tank heating Drum heating Filter heating Hopper heating Pipe, valve and pump heating Tank containers IBC’s Heating hoods Automotive Paint shopsType ELKM-AG-H up to 260 °CAdvantages: High chemical and very high mechanical resistance (7 J) Suitable for all industrial areas High operation temperature Can be used in fluids Easy to install, even on complex shapes High flexibility Resistant to steam purgingeltherm® heating cables type ELKM-AG-H can be perfectly applied for industrial applications on pipes, drums and their mounting parts . They can be used in stabilized and controlled operation according to EN 60079-30-2 . Heating cables ELKM-AG-H are suitable for applications with higher level of mechanical stress (7 J) .PTFE-insulated heating cable Heating cable und Heizbänder 1.19with protective braid and outer jacket heating cables and heating tapes 1.1907/2014 – All rights reserved. Subject to change without notice.For applications with fixed external diameter, please contact our engi-neers first . Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30mA . Please observe the standards IEC 62395-2, EN 60519-10 . Weight tolerances are possible for manufacturing reasons . Nominal resistances up to 1,500,000 ?/km upon request . Resistance tolerance: +/- 5 % .Heating conduc-tor stranded or spirally woundProtective braid nickel-plated copperInsulation PTFE Outer jacket PFA Manufactured according to EN 60079-30-1 ATEX certificate in preparation Classification II 2G Ex e IIC Gb II 2D Ex tb IIIC Db Technical informationStandards Insulation PTFE Protective braid nickel-plated copper Outer jacket PFA Nominal voltage max . 550 V Output, max . 30 W/m* Operating temp ., max . 260 °C Bending radius, min . 2,5 x outer diameter Installation temp ., min . -60 °C Moisture proof IP68 Impact resistance 7 Joule Heat conductor stranded, spirally wound for nomi nal resistance > 8,000 ?/km*Note: The output per meter of heating cable and the maxi-mum possible operating temperatures depend on the respec-tive application . For individual cases, we recommend that you contact our engineers – we will be pleased to advise you . For suitable connection and termination kits please note our considerable accessories catalogue unit .DataType ELKM-AG-H up to 260 °CNominal resistance (O/km)Outer diame-ter approx. (mm)Weightapprox. (g/m)Temperature coefficient(x 10 -3 / K)Art. No.4,40 (Cu 4 mm2) 6,8 68 4,30 01TA004H7,20 (Cu 2,5 mm2) 6,3 74 4,30 01TA007H10,00 6 68 4,30 01TA010H11,70 (Cu 1,5 mm2) 5,9 66 4,30 01TA011H15,00 5,7 58 4,30 01TA015H25,00 5,6 55 3,00 01TA025H31,50 5,9 64 1,60 01TA031H50,00 5,6 56 1,60 01TA050H65,00 5,4 53 1,60 01TA065H80,00 5,7 48 0,90 01TA080H100,00 5,6 58 0,90 01TA110H157,00 5,6 53 0,45 01TA115H180,00 5,3 48 0,90 01TA118H200,00 5,4 44 0,45 01TA120H260,00 5,3 49 0,45 01TA126H Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm®.com1.20Heating conduc-tor stranded or spirally woundNominal resistance (O/km)Outer diame-ter approx. (mm)Weightapprox. (g/m)Temperature coefficient(x 10 -3 / K)Art. No.280,00 5,2 45 0,38 01TA128H360,00 5,1 46 0,45 01TA138H430,00 5,3 50 0,18 01TA143H480,00 5,3 51 0,18 01TA148H600,00 5,2 46 0,18 01TA160H800,00 5,1 47 0,18 01TA180H1000,00 5,2 50 0,04 01TA210H1470,00 5 46 0,04 01TA214H1750,00 5 43 0,04 01TA217H1900,00 5,3 47 0,40 01TA219H2900,00 5,1 47 0,40 01TA229H4000,00 5 43 0,40 01TA240H4700,00 5 40 0,15 01TA247H6000,00 5 39 0,20 01TA260H7000,00 5 38 0,15 01TA270H8000,00 5 41 0,15 01TA280H heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.20Type ELK-AE up to 260 °CUse on apparatus, vessels, pipes, valves, etc ., in which low bending radii also allow compact tracing on small components across the entire surface . The version with protective braid, nickel-plated copper, is available with the name ELK-AS . A version without protective braid is also available: ELK-A – just ask us .factory terminatedPTFE insulated heating cable Heating cable und Heizbänder 1.21Advantages: Factory terminated Highly flexible Small bending radius High operating temp . High chemical resistance Moisture proofApplications: Vessels, pipes, valves Small components Can be used in many industrial areas Heat tracing on molds Heat tracing on satellite dishes IBC’s heating cables and heating tapes 1.2107/2014 – All rights reserved. Subject to change without notice. Manufactured according to DIN VDE 0253 Final inspection according to DIN VDE 0721 T 411 2,5 kV AC - 1 min EN 62395-1Technical informationStandards Insulation PTFE Protective braid VA 1 .4401 Nominal voltage 230 V Output, max . 25 W/m Operating temp ., max . 260 °C Heating conductor diameter 3,1 - 3,6 mm Bending radius, min . 2,5 x outer diameter Installation temp ., min . -60 °C Cold lead length, both ends 1,2 m, without plug Moisture proof yes Protection class IDataType ELK-AE up to 260 °CDesignation Heated length (m)Nominal output (W) temperature, max. 100 °CArt. No. Nominal output (W) temperature, max. 150 °CArt. No. Nominal output (W) temperature, max. 200 °CArt. No.ELK-AE 1,2 1,2 30 0133011 – – – –ELK-AE 2,2 2,2 54 0133021 – – – –ELK-AE 3,4 3,4 78 0133031 52 0133032 26 0133033ELK-AE 4,8 4,8 94 0133041 69 0133042 37 0133043ELK-AE 6,0 6,0 147 0133061 88 0133062 44 0133063ELK-AE 8,4 8,4 210 0133081 126 0133082 63 0133083ELK-AE 10,8 10,8 245 0133101 163 0133102 82 0133103ELK-AE 12,0 12,0 294 0133121 176 0133122 88 0133123ELK-AE 14,0 14,0 344 0133141 – – – –ELK-AE 20,0 20,0 464 0133201 294 0133202 – –ELK-AE 25,0 25,0 623 0133251 371 0133252 192 0133253ELK-AE 30,0 30,0 705 0133301 441 0133302 220 0133303ELK-AE 35,0 35,0 864 0133351 521 0133352 – –ELK-AE 42,0 42,0 1 .008 0133421 611 0133422 315 0133423ELK-AE 56,0 56,0 1 .390 0133561 756 0133562 378 0133563 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.22*Note: The output per meter of heating cable and the maximum possible operating temperatures depend on the respective application . For individu-al cases, we recommend that you contact our engineers – we will be pleased to advise you . For applications with fixed external diameter, please contact our engi-neers first . Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . Other lengths upon request . Resistance tolerance: +/- 5 % All output figures are nominal values at +20 °C . Lengths tolerance ± 2%, max . ± 0,25 m . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.22Type ELK-AG-L up to 260 °CThis versatile, factory terminated, heating cable is used for frost protection and temperature mainte-nance, even under highly corrosive environmental conditions which means this heating cable can be used or an extremely wide variety of applications . .factory terminatedPTFE insulated heating cable Heating cable und Heizbänder 1.23Advantages: Factory terminated High chemical and mechanical resistance Can be used in all industrial areas High operating temp . Can be used in liquids Easy to install, even on complex shapes Highly flexible Resistant to steam purgingApplications: e.g. Heat tracing on tanks Heat tracing on vessels Heat tracing on filters Heat tracing on satellite dishes Heat tracing on hoppers Pipes, valves and pumps Automotive Tank containers IBC’s Heating hoods heating cables and heating tapes 1.2307/2014 – All rights reserved. Subject to change without notice.Other lengths upon request . Resistance tolerance: +/- 5 % All output figures are nominal values at +20 °C . Lengths tolerance ± 2%, max . ± 0,25 m . Manufactured according to DIN VDE 0253, EN 62395-1 VDE mark approval 40001594Technical informationStandards Insulation PTFE Protective braid nickel-plated copper Outer jacket PTFE Nominal voltage 230 V Output 25 W/m Operating temp ., max . 260 °C Heating conductor diameter 4,1 - 4,8 mm Bending radius, min . 2,5 x outer diameter Cold lead length, both ends 1,2 m, without plug Installation temp ., min . -60 °C Moisture proof yes Protection class IDataType ELK-AG-L up to 260 °CDesignation Heated length (m)Nominal output (W) temperature, max. 100 °CArt. No. Nominal output (W) temperature, max. 150 °CArt. No. Nominal output (W) temperature, max. 200 °CArt. No.ELK-AG-L 1,2 1,2 30 0135011ELK-AG-L 2,2 2,2 54 0135021ELK-AG-L 3,4 3,4 78 0135031 52 0135032 26 0135033ELK-AG-L 4,8 4,8 94 0135041 69 0135042 37 0135043ELK-AG-L 6,0 6,0 147 0135061 88 0135062 44 0135063ELK-AG-L 8,4 8,4 210 0135081 126 0135082 63 0135083ELK-AG-L 10,8 10,8 245 0135101 163 0135102 82 0135103ELK-AG-L 12,0 12,0 294 0135121 176 0135122 88 0135123ELK-AG-L 14,0 14,0 344 0135141ELK-AG-L 20 20,0 464 0135201 294 0135202ELK-AG-L 25 25,0 623 0135251 371 0135252 192 0135253ELK-AG-L 30 30,0 705 0135301 441 0135302 220 0135303ELK-AG-L 35 35,0 864 0135351 521 0135352ELK-AG-L 42,0 42,0 1 .008 0135421 611 0135422 315 0135423ELK-AG-L 56,0 56,0 1 .390 0135561 756 0135562 378 0135563 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.24*Note: The output per meter of heating cable and the maxi-mum possible operating temperatures depend on the respec-tive application . For individual cases, we recommend that you contact our engineers – we will be pleased to advise you . For applications with fixed external diameter, please contact our engi-neers first . Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.24Type ELK-AG-N up to 260 °CAdvantages: Factory terminated High chemical and mechanical resistance Can be used in all industrial areas High operating temp . Can be used in liquids Easy to install, even on complex shapes Highly flexible Resistant to steam purgingThis versatile heating cable is used for frost protection and temperature maintenance, even under highly corrosive environmental conditions . The heating cable ELK-AG-N is suited and approved for use in potentially explosive atmospheres . It is highly flexible permitting its application in areas of use . Upon consultation of our engineers, this cable may likewise be used for inside trace heating of piping .factory terminatedPTFE insulated heating cable Heating cable und Heizbänder 1.25Applications, especially in hazardous areas: e.g. Heat tracing on tanks Heat tracing on vessels Heat tracing on filters Heat tracing on hoppers Pipes, valves and pumps Tank containers IBC’s Heating hoods Automotive Varnishing plants heating cables and heating tapes 1.2507/2014 – All rights reserved. Subject to change without notice.*Note: The output per meter of heating cable and the maximum possible operating temperatures depend on the respective application . For individu-al cases, we recommend that you contact our engineers – we will be pleased to advise you . Manufactured according to DIN VDE 0253, EN 60079-30-1 Cable 60079-30-1 Pipe collar 60079-0-7 VDE mark approval 40024940For Ex-applications: Classification cable II 2G Ex e IIC Gb II 2D Ex tb IIIC Db Certificate cable EPS 12ATEX1466U Classification ExCon II 2G Ex e IIC T6…T3 Gb II 2D Ex tb IIIC TX Db Certificate ExCon 04ATEX1005X / 07ATEX1023X Standard ExCon EN 60079-0:2009, EN 60079-7:2007, EN 60079-31:2009Technical informationStandards Insulation PTFE Protective braid nickel-plated copper Outer jacket PFA Nominal voltage 230 V Output 25 W/m Operating temp ., max . 260 °C Heating conductor diameter 3,8 - 4,7 mm Bending radius, min . 2,5 x outer diameter Installation temp ., min . -60 °C Cold lead length, both ends 1,2 m, without plug Moisture proof yes Protection class I Impact resistance 4 JouleDataType ELK-AG-N up to 260 °C Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.26Ex-Con connection and junction kitCables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30mA . Please observe the standards IEC 62395-2, EN 60519-10 . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.26Type ELW-GN up to 260 °CAdvantages: Factory terminated Single end connection Highly flexible Surface-friendly Small bending radius Easy to assemble Moisture proofApplications: Heat tracing on apparatus, appliances and systems Devices and systems made of glass with sensitive surfaces Laboratory applicationsThe factory terminated heating tape ELW-GN with E-glass insulation is suitable for trace heating of apparatus, appliances and systems in a non-corrosive environment and its preferred use is for glass devices and systems with sensitive surfaces .for sensitive surfacesHeating tape Heating cable und Heizbänder 1.27 heating cables and heating tapes 1.2707/2014 – All rights reserved. Subject to change without notice. Manufactured according to DIN VDE 0253 Final inspection according to DIN VDE 0721 T411 2,5 kV AC – 1 minTechnical informationStandards Insulation (1) PTFE Protective braid (2) nickel-plated copper Outer jacket (3) E-glass textile Nominal voltage 230 V Output approx . 50 W/m* Operating temp ., max . 260 °C Dimensions (wxh) approx . 25 x 6 mm Bending radius, flat, min . 10 mm Installation temp ., min . - 60 °C Moisture proof yes Connection 1,2 m, without plug Protection class IDataType ELW-GN up to 260 °CDesignation Heated length (m)Nominal output (W) temperature, max. 100 °CArt. No. Nominal output (W) temperature, max. 150 °CArt. No. Nominal output (W) temperature, max. 200 °CArt. No.ELW-GN 0,6 0,6 30 0231001 – –ELW-GN 1,1 1,1 54 0231011 – –ELW-GN 1,7 1,7 78 0231701 52 0231012 26 0231013ELW-GN 2,4 2,4 94 0231021 69 0231022 37 0231023ELW-GN 3,0 3,0 147 0231031 88 0231032 44 0231033ELW-GN 4,2 4,2 210 0231041 126 0231042 63 0231043ELW-GN 5,4 5,4 245 0231051 163 0231052 82 0231053ELW-GN 6,0 6,0 294 0231061 176 0231062 88 0231063ELW-GN 7,0 7,0 344 0231071 – –ELW-GN 10,0 10,0 464 0231101 294 0231102 –ELW-GN 12,5 12,5 623 0231121 371 0231122 192 0231123ELW-GN 15,0 15,0 705 0231151 441 0231152 220 0231153ELW-GN 17,5 17,5 864 0231171 521 0231172 –ELW-GN 21,0 21,0 1 .008 0231211 611 0231212 315 0231213ELW-GN 28,0 28,0 1 .390 0231281 756 0231282 378 0231283 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.28*Note: The output per meter of heating cable and the maximum possible operating temperatures depend on the respective application . For individu-al cases, we recommend that you contact our engineers – we will be pleased to advise you . Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . 321Other lengths upon request . Resistance tolerance: +/- 5 % All output figures are nominal values at +20 °C . Lengths tolerance ± 2%, max . ± 0,25 m . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.28Type ELW-VA up to 260 °CAdvantages: Factory terminated Single end connection Highly flexible Small bending radius Small dimensions Robust Easy to assemble Moisture proofApplications: Heat tracing on apparatus, appliances and systems Laboratory applications Temperature maintenance on pipingThe factory terminated heating tape ELW-VA is suitable for trace heating of apparatus, appliances and systems in a corrosive environment . The minimal dimensions of the heating tape enable close tracing . This heating tape is not sensitive to rough surfaces .for corrosive environmentHeating tape Heating cable und Heizbänder 1.29 heating cables and heating tapes 1.2907/2014 – All rights reserved. Subject to change without notice.*Note: The output per meter of heating cable and the maximum possible operating temperatures depend on the respective application . For individu-al cases, we recommend that you contact our engineers – we will be pleased to advise you . Manufactured according to DIN VDE 0253 Final inspection according to DIN VDE 0721 T411 2,5 kV AC – 1 minTechnical informationStandards Insulation (1) PTFE Protective braid (2) 1 .4301 Nominal voltage 230 V Output approx . 50 W/m* Operating temp ., max . 260 °C Dimensions, tape (wxh) approx . 10 x 5 mm Dimensions, sleeve (wxhxl) 32 x 16 x 65 mm Bending radius, flat, min . 15 mm Installation temp ., min . - 30 °C Moisture proof yes Connection 1,2 m silicone cable, without plug Protection class IDataType ELW-VA up to 260 °CDesignation Heated length (m)Nominal output (W) temperature, max. 100 °CArt. No. Nominal output (W) temperature, max. 150 °CArt. No. Nominal output (W) temperature, max. 200 °CArt. No.ELW-VA 0,6 0,6 30 0232001 – –ELW-VA 1,1 1,1 54 0232011 – –ELW-VA 1,7 1,7 78 0232701 52 0232012 26 0232013ELW-VA 2,4 2,4 94 0232021 69 0232022 37 0232023ELW-VA 3,0 3,0 147 0232031 88 0232032 44 0232033ELW-VA 4,2 4,2 210 0232041 126 0232042 63 0232043ELW-VA 5,4 5,4 245 0232051 163 0232052 82 0232053ELW-VA 6,0 6,0 294 0232061 176 0232062 88 0232063ELW-VA 7,0 7,0 344 0232071 – –ELW-VA 10,0 10,0 464 0232101 294 0232102 –ELW-VA 12,5 12,5 623 0232121 371 0232122 192 0232123ELW-VA 15,0 15,0 705 0232151 441 0232152 220 0232153ELW-VA 17,5 17,5 864 0232171 521 0232172 –ELW-VA 21,0 21,0 1 .008 0232211 611 0232212 315 0232213ELW-VA 28,0 28,0 1 .390 0232281 756 0232282 378 0232283 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.30Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . 21glass fibre spacer Other lengths upon request . Resistance tolerance: +/- 5 % All output figures are nominal values at +20 °C . Lengths tolerance ± 2%, max . ± 0,25 m . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.30Type ELK-H up to 450 °CAdvantages: Factory terminated Can be used for high temperatures Ready to be used instantly Highly flexible Small bending radius Easy to assembleApplications: Heat tracing on apparatus, appliances and systems Glass devices and systems with high output needs Laboratory applicationsThe factory terminated heating cable ELK-H is suitable for trace heating of apparatus, appliances and systems in a dry environment with protected installation . Both the high output and the slight, flexible design provide a wide variety of applications for this heating cable .for maximum flexibilityHeating cable Heating cable und Heizbänder 1.31 heating cables and heating tapes 1.3107/2014 – All rights reserved. Subject to change without notice.*Note: The output per meter of heating cable and the maximum possible operating temperatures depend on the respec-tive application . For individual cases, we recommend that you contact our engineers – we will be pleased to advise you . Manufactured according to DIN VDE 0721 T2 Final inspection according to DIN VDE 0721 T2 1,5 kV AC – 1 minTechnical informationStandards Insulation E-glass textile Nominal voltage 230 V Output approx . 125 W/m* Operating temp ., max . 450 °C Diameter 3,5 - 4,5 mm Bending radius, min . 8 mm Installation temp ., min . not restricted Moisture proof no Cold lead length 1,2 m, without plug Protection class depending on installationDataType ELK-H up to 450 °CDesignation Heated length (m)Nominal output (W) Art. No.ELK-H-0,5 0,5 60 0140002 ELK-H-1,0 1,0 126 0140005 ELK-H-1,4 1,4 180 0140008 ELK-H-2,0 2,0 250 0140013ELK-H-3,0 3,0 375 0140014 ELK-H-4,0 4,0 490 0140019Designation Heated length (m)Nominal output (W) Art. No.ELK-H-5,0 5,0 622 0140020 ELK-H-6,5 6,5 768 0140024ELK-H-8,0 8,0 987 0140025 ELK-H-10,0 10,0 1260 0140030 ELK-H-12,6 12,6 1555 0140031 ELK-H-16,0 16,0 1945 0140034 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.32Not all resistances are available ex stock – please contact us . Other lengths upon request . Resistance tolerance: +/- 5 % Lengths tolerance ± 2%, max . ± 0,25 m . Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30mA . Please observe the standards EN 60519-1, EN 60519-2 . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.32Type ELK-HS up to 450 °CAdvantages: Factory terminated Increased safety through protective braid High output Ready to be used instantly Highly flexible Can be used for higher temperatures Small bending radius Easy to assembleApplications: Heat tracing on apparatus, appliances and systems Devices and systems with high output needs Laboratory applicationsThis factory terminated heating cable is ideally suited for trace heating of apparatus, appliances and systems in a dry environment . Preferably used for appliances and systems with high output requi-rements . Small dimensions and high flexibility simplify the assembly . The outer braiding provides protection against mechanical damages and can be integrated in the electrical protection measures .robust, for higher temperaturesHeating cable Heating cable und Heizbänder 1.33 heating cables and heating tapes 1.3307/2014 – All rights reserved. Subject to change without notice.*Note: The output per meter of heating cable and the maximum possible operating temperatures depend on the respec-tive application . For individual cases, we recommend that you contact our engineers – we will be pleased to advise you . Manufactured according to DIN VDE 0721 T2 Final inspection according to DIN VDE 0721 T2 1,5 kV AC – 1 minTechnical informationStandards Insulation E-glass textile Protective braid 1 .4301 Nominal voltage 230 V Output approx . 125 W/m* Operating temp ., max . 450 °C Diameter 4,5 mm Bending radius, min . 8 mm Installation temp ., min . not restricted Moisture proof no Cold lead length 1,2 m, without plug Protection class IDataType ELK-HS up to 450 °CDesignation Heated length (m)Nominal output (W) Art. No.ELK-HS-0,5 0,5 60 0140102 ELK-HS-1,0 1,0 126 0140105 ELK-HS-1,4 1,4 180 0140108 ELK-HS-2,0 2,0 250 0140113ELK-HS-3,0 3,0 375 0140114 ELK-HS-4,0 4,0 490 0140119Designation Heated length (m)Nominal output (W) Art. No.ELK-HS-5,0 5,0 622 0140120 ELK-HS-6,5 6,5 768 0140124ELK-HS-8,0 8,0 987 0140125 ELK-HS-10,0 10,0 1260 0140131 ELK-HS-12,6 12,6 1555 0140134 ELK-HS-16,0 16,0 1945 0140137 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.34Not all resistances are available ex stock – please contact us . Other lengths upon request . Resistance tolerance: +/- 5 % Lengths tolerance ± 2%, max . ± 0,25 m . Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.34Type ELW-H up to 450 °CAdvantages: Factory terminated Ready to be used instantly Single end connection Can be used for high temperatures Highly flexible Surface-friendly Small bending radius Easy to assembleIt is used to heat up glass, quartz or ceramic devices and systems in a non-corrosive and dry envi-ronment . The tape is highly flexible, does not damage the surfaces and is suitable for high output requirements . The heating tape should be protected mechanically and adjacent metallic parts should be integrated in the electrical protection measures .for maximum flexibilityHeating tape Heating cable und Heizbänder 1.35Applications: Heat tracing on apparatus, appliances and systems made of glass, quartz or ceramic material Glass devices and systems with high output needs Laboratory & research applications heating cables and heating tapes 1.3507/2014 – All rights reserved. Subject to change without notice.*Note: The output per meter of heating cable and the maximum possible operating temperatures depend on the respec-tive application . For individual cases, we recommend that you contact our engineers – we will be pleased to advise you . Manufactured according to DIN VDE 0721 T2 Final inspection according to DIN VDE 0721 T411 1,5 kV AC – 1 minTechnical informationStandards Insulation (1) E-glass textile Outer jacket (2) E-glass textile Nominal voltage 230 V Output approx . 250 W/m* Operating temp ., max . 450 °C Dimensions 30 x 5 mm Bending radius, flat, min . 10 mm Installation temp ., min . not restricted Moisture proof no Connection 1,2 m, without plug Protection class depending on installationDataType ELW-H up to 450 °CDesignation Heated length (m)Nominal output (W) Art. No.ELW-H-0,50 0,50 126 0240002 ELW-H-0,70 0,70 180 0240005 ELW-H-1,00 1,00 250 0240010ELW-H-1,50 1,50 375 0240011ELW-H-2,00 2,00 490 0240016 ELW-H-2,50 2,50 622 0240017Designation Heated length (m)Nominal output (W) Art. No.ELW-H-3,25 3,25 768 0240021 ELW-H-4,00 4,00 987 0240025ELW-H-5,00 5,00 1260 0240027 ELW-H-6,30 6,30 1555 0240031ELW-H-8,00 8,00 1945 0240034 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.36Not all resistances are available ex stock – please contact us . Other lengths upon request . Resistance tolerance: +/- 5 % Lengths tolerance ± 2%, max . ± 0,25 m . Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30mA . Please observe the standards EN 60519-1, EN 60519-2 .21 heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.36Type ELW-HS up to 450 °CAdvantages: Factory terminated Ready to be used instantly Single end connection Increased safety through protective braid Can be used for higher temperatures Highly flexible Surface-friendly Small bending radius Easy to assembleApplications: Heat tracing on apparatus, piping, valves and systems Devices and systems with high output needs Laboratory & research applicationsThis factory terminated heating cable is ideally suited for trace heating of apparatus, appliances and systems in a non-corrosive and dry environment . The heating tape is highly flexible, does not damage the surfaces and is suitable four high output requirements . The braiding provides protection against mechanical damages and can be integrated in the electrical protection measures .robust, for higher temperaturesHeating tape Heating cable und Heizbänder 1.37 heating cables and heating tapes 1.3707/2014 – All rights reserved. Subject to change without notice.*Note: The output per meter of heating cable and the maximum possible operating temperatures depend on the respec-tive application . For individual cases, we recommend that you contact our engineers – we will be pleased to advise you . Manufactured according to DIN VDE 0721 T2 Final inspection according to DIN VDE 0721 T411 1,5 kV AC – 1 minTechnical informationStandardsDataType ELW-HS up to 450 °CDesignation Heated length (m)Nominal output (W) Art. No.ELW-HS-0,5 0,50 126 0240102 ELW-HS-0,7 0,70 180 0240105 ELW-HS-1,0 1,00 250 0240110 ELW-HS-1,5 1,50 375 0240111ELW-HS-2,0 2,00 490 0240116 ELW-HS-2,5 2,50 622 0240117Designation Heated length (m)Nominal output (W) Art. No.ELW-HS-3,25 3,25 768 0240121 ELW-HS-4,0 4,00 987 0240125ELW-HS-5,0 5,00 1260 0240127 ELW-HS-6,3 6,30 1555 0240131ELW-HS-8,0 8,00 1945 0240135 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.38 Insulation (1) E-glass textile Protective braid (2) 1 .4301 Outer jacket (3) E-glass textile Nominal voltage 230 V Output approx . 250 W/m* Operating temp ., max . 450 °C Dimensions 30 x 5 mm Bending radius, flat, min . 10 mm Installation temp ., min . not restricted Moisture proof no Connection 1,2 m, without plug Protection class INot all resistances are available ex stock – please contact us . Other lengths upon request . Resistance tolerance: +/- 5 % Lengths tolerance ± 2%, max . ± 0,25 m .Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . 31 2 heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.38Type ELK-Q up to 900 °CAdvantages: Factory terminated Highest output Highest operating temperatures Ready to be used instantly Highly flexible Small bending radius Surface-friendlyApplications: Heat tracing on glass, quartz and ceramic devices Devices and systems with high output needs Laboratory & research applicationsThe preferred use of the heating cable is for glass, quartz or ceramic devices and systems with the highest output requirements in a dry environment . Small dimensions and high flexibility simplify assembly . The heating cable must be installed touch-protected . If you plan to use the heating cable on metal and at an operating temperature in excess of 650 °C, please consult our project engineers .for highest outputHeating cable Heating cable und Heizbänder 1.39 heating cables and heating tapes 1.3907/2014 – All rights reserved. Subject to change without notice.*Note: The output per meter of heating cable and the maximum possible operating temperatures depend on the respec-tive application . For individual cases, we recommend that you contact our engineers – we will be pleased to advise you . Manufactured according to DIN VDE 0721 T2 Final inspection according to DIN VDE 0721 T2 1,5 kV AC – 1 minTechnical informationStandards Insulation quartz textile Nominal voltage 230 V Output ~ 175 W/m* Operating temp ., max . 900 °C Diameter approx . 4 mm Bending radius, min . 5 x outer diameter Installation temp ., min . not restricted Moisture proof no Cold lead length 1,2 m, without plug Protection class depending on installationDataType ELK-Q up to 900 °CDesignation Heated length (m)Nominal output (W) Art. No.ELK-Q 0,6 0,6 106 0160003 ELK-Q 1,0 1,2 138 0160006 ELK-Q 1,4 1,4 270 0160007 ELK-Q 2,0 2,0 319 0160011ELK-Q 3,1 3,1 533 0160014 Designation Heated length (m)Nominal output (W) Art. No.ELK-Q 4,0 4,0 696 0160017 ELK-Q 5,0 5,0 882 0160020ELK-Q 6,0 6,0 1062 0160023 ELK-Q 8,0 8,0 1438 0160026ELK-Q 10,0 10,0 1653 0160029 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.40Not all resistances are available ex stock – please contact us . Other lengths upon request . Resistance tolerance: +/- 5 % Lengths tolerance ± 2%, max . ± 0,25 m .Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.40Type ELW-Q up to 900 °CAdvantages: Factory terminated Highest output Highest operating temperatures Ready to be used instantly Highly flexible Small bending radius Surface-friendly Single end connectionApplications: Heat tracing on glass, quartz and ceramic devices Devices and systems with highest output needs Laboratory & research applicationsThe preferred use of the heating cable is for glass, quartz or ceramic devices and systems with the highest output requirements in a dry environment . Single end connection and high flexibility simplify assembly . The heating tape must be installed touch-protected . If you plan to use the heating cable on metal and at an operating temperature in excess of 650 °C, please consult our project engineers .for highest outputHeating tape Heating cable und Heizbänder 1.41 heating cables and heating tapes 1.4107/2014 – All rights reserved. Subject to change without notice.Not all resistances are available ex stock – please contact us . Other lengths upon request . Resistance tolerance: +/- 5 % Lengths tolerance ± 2%, max . ± 0,25 m . Cables shall neither intersect nor contact . Provide protection by means of circuit breaker FI 30 . Please observe the standards IEC 62395-2, EN 60519-10 . *Note: The output per meter of heating cable and the maximum possible operating temperatures depend on the respec-tive application . For individual cases, we recommend that you contact our engineers – we will be pleased to advise you . Manufactured according to DIN VDE 0721 T2 Final inspection according to DIN VDE 0721 T2 1,5 kV AC – 1 minTechnical informationStandards Insulation (1) quartz textile Outer jacket (2) quartz textile Nominal voltage 230 V Output 350 W/m* Operating temp ., max . 900 °C Dimensions (wxh) approx . 35 x 6 mm Bending radius, flat, min . 20 mm Installation temp ., min . not restricted Moisture proof no Power cable 1,2 m, without plugDataType ELW-Q up to 900 °CDesignation Heated length (m)Nominal output (W) Art. No.ELW-Q 0,6 0,60 138 0260003 ELW-Q 0,7 0,70 270 0260005 ELW-Q 1,0 1,00 319 0260008 ELW-Q 1,5 1,55 533 0260012ELW-Q 2,0 2,00 696 0260014 Designation Heated length (m)Nominal output (W) Art. No.ELW-Q 2,5 2,50 882 0260017 ELW-Q 3,0 3,00 1062 0260020ELW-Q 4,0 4,00 1438 0260023 ELW-Q 5,0 5,00 1653 0260026 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.4221 heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.42Type ELK-MI/VA up to 600 °CAdvantages: Factory terminated Hermetically sealed metal sheath Highly robust and mechanically stable Moisture proof Higher chemical resistance Higher operating temperatures Higher output per meterApplications: Moisture proof applications at high outputs and temperatures Can be immersed in fluids Heat tracing on piping Chemical & petrochemical industries Machinery and plant construction Equipment engineering Vacuum technologyFactory terminated heating cable, suitable for use in overpressure and vacuum applications . Can be used as radiant heating with high output density . We provide engineering services from initial design up to turnkey project execution . Complete engineering up to commissioning . highly robustHeating cable Heating cable und Heizbänder 1.43 heating cables and heating tapes 1.4307/2014 – All rights reserved. Subject to change without notice.Technical informationDataType ELK-MI/VA up to 600 °CHeating conductorInsulation magnesium oxideOuter jacket VA 1.4541 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.44 Outer jacket stainless steel 1 .4541 Operating temp ., max . 600 °C Nominal output up to 250 W/m Nominal voltage up to 600 V AC Cold lead, length 2 x 0,50 m Cold lead, cross section 2,50 mm² Cable gland brass M20 x 1,5 Protective conductor integrated connection IP rating IP 65 Protection class I Bending radius diameter x 5 Moisture proof yesFor suitable connection and termination kits please note our considerable accessories catalogue unit .Important: Avoid multiple bends with minimum bending radius (risk of cable damage) .A table of chemical resistances is available on our website www .eltherm .com .Other cross sections and lengths of cold leads are available upon request .No. Diameter = mmResistance O/km1 3 .20 10,0002 3 .20 6,3003 3 .20 5,2004 3 .20 4,0005 3 .40 3,3006 3 .40 2,5007 3 .60 1,6008 3 .90 1,0009 4 .30 63010 4 .50 50011 4 .70 40012 5 .30 25013 5 .90 20014 6 .50 16015 4 .50 120*Note: The output per meter of heating cable and the maximum possible operating tempe-ratures depend on the respective application . For individual cases, we recommend that you contact our engineers – we will be pleased to advise you .This is just a summary of all available resistances . For further resistances, please contact us . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.44Type ELK-MI/INC up to 1.000 °Chighly robustHeating cable Heating cable und Heizbänder 1.45Factory terminated heating cable, suitable for use in overpressure and vacuum applications . Can be used as radiant heating with high output density . We provide engineering services from initial design up to turnkey project execution . Complete engineering up to commissioning . Advantages: Factory terminated Hermetically sealed metal sheath Highly robust and mechanically stable Moisture proof Highest chemical resistance Highest operating temperatures Highest output per meterApplications: Moisture proof applications at high outputs and temperatures Can be immersed in fluids Heat tracing on piping Chemical & petrochemical industries Machinery and plant construction Equipment engineering Vacuum technology heating cables and heating tapes 1.4507/2014 – All rights reserved. Subject to change without notice.Technical informationDataType ELK-MI/INC up to 1.000 °CHeating conductorInsulation magnesium oxideOuter jacket stainless steel 2.4816 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.46 Outer jacket stainless steel 2 .4816 (Inconel) Operating temp ., max . 1 .000 °C Nominal output up to 250 W/m Nominal voltage up to 600 V AC Cold lead, length 2 x 0,50 m Cold lead, cross section 2,50 mm² Cable gland brass M20 x 1,5 Protective conductor integrated connection IP rating IP 65 Protection class I Bending radius diameter x 5 Moisture proof yesFor suitable connection and termination kits please note our considerable accessories catalogue unit .Important: Avoid multiple bends with minimum bending radius (risk of cable damage) .A table of chemical resistances is available on our website www .eltherm .com .Other cross sections and lengths of cold leads are available upon request .No. Diameter = mmResistance O/km1 3 .20 10,0002 3 .20 6,3003 3 .20 5,2004 3 .20 4,0005 3 .40 3,3006 3 .40 2,5007 3 .60 1,6008 3 .90 1,0009 4 .30 63010 4 .50 50011 4 .70 40012 5 .30 25013 5 .90 20014 6 .50 16015 4 .50 120*Note: The output per meter of heating cable and the maximum possible operating tempe-ratures depend on the respective application . For individual cases, we recommend that you contact our engineers – we will be pleased to advise you .This is just a summary of all available resistances . For further resistances, please contact us . heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.46Type ELW-3-FEP/PVC up to 90 °CAdvantages: Long heating circuits Simple termination Different nominal voltages Moisture proof Easy to assemble thanks to longitudinal layApplications: Long distances Frost protection and temperature maintenance Pipes in tunnels Fire mainsThe heating cable ELW-3-FEP/PVC is particularly suited for specific applications requiring long heating distances to be covered . The heating cable is applied for frost protection, typical application ranges are for example pipes in tunnels . The heating cable consists of three high-quality resistance wires with an insulation of chemically resis-tant fluoropolymer . Additionally the heating cable is protected by a PVC outer jacket .Moreover the heating cable stands out for simple installation in spite of its solid design .for long heating circuitsHeating tape Heating cable und Heizbänder 1.47 heating cables and heating tapes 1.4707/2014 – All rights reserved. Subject to change without notice.For suitable connection and termination kits please note our considera-ble accessories catalogue unit .*Important: The heating circuit length shall not be below the minimum specified . If you have questions, please contact our engineers . Technical information Insulation fluoropolymer Outer jacket PVC Nominal voltage 300/500 V Output, max . 25 W/m Operating temp ., max . 90 °C power off 30 °C power on Insulation thickness 1 mm Bending radius 30 mm Protection class II Moisture proof yesDataType ELW-3-FEP/PVC up to 90°CHeating conductorInsulation fluoropolymerOuter jacket PVCType Resistance O/kmCircuit length*, min. in m(400 V/Stern)Dimensions, approx (mm) Art. No.3 x 0,50 mm2 34,2 435 5,2 x 17,1 03T03423 x 0 .,75 mm2 23,8 520 5,2 x 17,1 03T02383 x 1,00 mm2 17,1 610 5,2 x 17,1 03T01713 x 1,50 mm2 11,5 750 5,2 x 17,1 03T01153 x 2,50 mm2 7,0 952 8,0 x 20,6 03T00703 x 4,00 mm2 4,3 1215 8,0 x 20,6 03T00433 x 6,00 mm2 2,9 1480 8,0 x 20,6 03T0029 Heating cable und Heizbänder Telefon: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.48 heating cables and heating tapes Phone: +49 (0) 27 36 / 44 13-0 www.eltherm.com1.48