SF 400 T - Suction and Filter Cart - Datasheet

page 1 of 2 High-performance suction and filter cart for the reprocessing of strong dirty cooling lubricants and cutting oils. SF 400 T unit valueCapacityMain container ca. l 400Splinter suction container ca. l 80Oil container ca. l 50MeasuresLength mm 2900Width mm 910Height mm 1500Empty weight kg 865Suction height (stat.) mm/WS 2600Suction current l/min 250pH-value pH 5 - 9,5Temperature max. °C 50Separator stream l/h 800-3000Separation particel size µm 2 - 5Noise level dB(A) 78Power connection V/A 400/163 phases, PE Hz 50Connected load kW/A 5,5/13 SF 400 T Device components: Housing Welded structure of 3mm steel sheet Outside- and interior lacquer finish 2-way 2-K-Lacquer (NCS-S 2010-R70B) Vacuum-Bandfilter For coarse separation of splinters and particles Fleece length 100 m Siphon pipes Length 4,5 mm, Ø 50 mm Length 4 m, Ø 25 mm with a D-hitch installed, for bypass operation Suction tube 800 mm lang Breitdüse 100 mm breit Nozzle set Reducer Ø 36 mm, Extension pipe Länge 440 mm Soil nozzle 400 mm wide Joint nozzle Separator-system Solid-collecting drum separator Type MKR 3.03, 2- und 3-phases-separation Capacity: 800 -1000 l/h bei 3-phases-separation 1000-3000 l/h bei 2-phases-separation Delivery with 2 mud-in-corrode Medium-affected separator parts from aluminium page 2 of 2 - Cleaning door at the tail Width: container width, Height: 500 mm (We recommend this cleaning port for a problem-free cleaning of the equipment.) - Float construction For surface exhaust in the bypass enterprise - Electric drive with battery and battery charger (The device becomes 378 mm longer, the weight erhöht increases to 165 kg). Optional are different sucking of systems available Documentation - manual, switch chart Technical changes reserved Status 03/09 k/Datenblätter/Neue Datenblätter Ausland/10400 T Device components SF 400 T: Emptying system Emptying pump for leading back the medium from the main container. 5 m Emptying hose Ø 25 mm, Ball stop valve at the hose end 3 m Emptying hose, Ø 25 mm with 1 D-hitch for bypass operation Cleaning system - High-pressure pump: for cleaning of the emulsion containers 220 V – 2,6 kW - 8 m HD-hose - steplessly adjustable lance nozzle 0-70 bar Splinter suction - Admission of splinters and mud, removeable, entry ashes for fork lift - filter fleece transportation, hood rear Switchgear cabinet - Equipment for automatic enterprise - Rotary field identification - Phases turn-over switch in the CEE-plug - Announcement and safety device of all containers against overflow Power connection 16 A-Cekon-plug with 10 m power cabel 5-pin. Options - Cleaning hose special Length 4 m (For hard accessible places, which can not be reached with the stare lance, e.g. under the splinter promoter.) - Cleaning port at the tail Measures: 420 x 150 mm (We recommend this cleaning port for a problem-free cleaning of the equipment.)