Telebelt - TB 80 - Telescopic Belt Conveyor Brochure

TB 3639 US1 TB 80 TB 80 • Places materials from sand to 4" (100mm) rock• Smooth surge-free conveying results• Sets up under low 14' 9" (4.50m) heights• 80' (24.38 m) horizontal reachTelebelt® TB 80Telescopic Belt ConveyorTB 3639 US Right to make technical amendments reserved. © Putzmeister America 2005 Printed in USA (3.50509)Putzmeister America1733 90th StreetSturtevant, WI 53177 USATelephone (262) 886-3200 (800) 884-7210Facsimile (262) 884-6338www.putzmeister.comAuthorized Distributor10 Conveyors Conveyor horizontal reach Maximum at 0° 80' (24.38m) Maximum at 30° 69' 9" (21.27m) Conveyor belt width 18" (457mm) Feed conveyor length 35' (10.70m) Feed conveyor belt width 18" (457mm) Trunk/end hose length 15' (4.57m) Discharge height from grade Maximum at 30° 46' 6" (14.18m) Maximum at -10° -6' 11" (-2.10m) Rated capacity at 0° 6 yd3/min (4.60m3/min) main & feed conveyors 360 yd3/hr (275m3/hr) Rated capacity up to 20° 3.80 yd3/min (2.90m3/min) main & feed conveyors 230 yd3/hr (175m3/hr) Maximum theoretical values listed. Outriggers Net reach beyond outriggers at 0° 75' 7" (23.05m) at 30° 65' 5" (19.93m) Outrigger spread front, hydraulic up/down 17' 1" (5.20m) rear, hydraulic up/down 17' 1" (5.20m) General Specifications Water tank capacity 170 gal (644L) Hydraulic oil tank capacity with cooler 100 gal (379L) Truck Specifications*•+ Weight 18,180 lbs (8,246kg) Engine horsepower 400 hp (300kW) Wheelbase 253" (6,426mm) Cab height 105" (2,667mm) Steering radius (outside) 46' (14m) Steering angle 30° Fuel tank capacity 80 gal (303L) Transmission Mack T309LR 9-Speed Transport Axle Weights*•+ Steering 18,967 lbs (8,603kg) Tandem 33,243 lbs (15,079kg) Total 52,210 lbs (23,682kg) Conveyor horizontal reach Maximum at 30° 69' 9" (21.27m)Feed conveyor length 35' (10.70m) Trunk/end hose length 15' (4.57m) Maximum at 30° 46' 6" (14.18m)Rated capacity up to 20° 3.80 yd3/min (2.90m3/min)Maximum theoretical values listed.Net reach beyond outriggers front, hydraulic up/down 17' 1" (5.20m) rear, hydraulic up/down 17' 1" (5.20m)Water tank capacity 170 gal (644L)Rated capacity at 0° 6 yd3/min (4.60m3/min) at 30° 65' 5" (19.93m) with cooler 100 gal (379L) Weight 18,180 lbs (8,246kg) Wheelbase 253" (6,426mm) Steering radius (outside) 46' (14m) Fuel tank capacity 80 gal (303L) Transmission Mack T309LR 9-Speed* Truck dimensions will vary with different truck makes, models and specifications.• Weights are approximate and include conveyor truck, full hydraulic oil, fuel, driver and 100 gal (379L) of water.+ All specifications apply to units mounted on Mack MR 688S.Photos and drawings are for illustrative purposes only. Steering 18,967 lbs (8,603kg) Total 52,210 lbs (23,682kg)?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????Saves Time & Labor4Need to place gravel and concrete on the same site in the same day? Telebelts® can perform multiple tasks from a single location. Quick setup and tear down as well as the ability to place material at high volumes enable you to complete more jobs with less manpower. Tedious tasks once requiring multiple trips with other equipment are eliminated.Handles Various Materials3In addition to handling aggregates from rock to sand with ease, a Telebelt® conveys a multitude of concrete mix designs. Separation and loss of air entrainment are not an issue with conveyed concrete. This makes them a great choice for critical mix designs.Placement Versatility7A Telebelt® offers a quick way to easily clear obstacles and place material exactly where you want it without the need for all-wheel drive mixer trucks, skid-steer loaders or other equipment. Ideal for maneuvering around a variety of job sites including mat pours, backfilling, tilt-up projects, bridge decks and slab work.Low Clearance ProjectsWith extremely low unfolding heights and the ability to be moved rapidly, Putzmeister Telebelts® can be set up and operated on jobs with height restrictions such as warehouse slabs. Material can be conveyed long distances in an enclosed structure, under bridges and into limited access structures.2T E L E B E L T ®A Cleaner, More Efficient Site8Telebelts® do not require priming and all material can be run off the belts eliminating waste. A highly efficient spring-tensioned carbide scraper system helps to keep job sites clean.Setup Convenience9An integral part of the feed conveyor, the folding hopper makes setup a breeze. Side panels fold into the feed conveyor and end panels connect with linchpins. The belt can then be easily fed with a ready mix truck from three sides. Optional hoppers are also available for use with a skid-steer loader, front-end loader or coal chute.• Tilt-Up Panels• Basements • Foundations/Footings• Mat Pours • Backfill • Bridge Decks• Slope Paving • Low Height Areas • Slabs• Landscaping• Dams• Environmental ProjectsTelebelt® TB 80Telescopic Belt Conveyor Standard FeaturesBoom • 80' (24.38m) horizontal reach • Low 14'9" (4.50m) unfolding height • Three-section telescopic boom with second and third boom section synchronization • Steel/aluminum base with two telescopic high strength aluminum sections • Single control lever to extend/retract all boom sections • Maintenance free sealed roller bearings • Quick telescoping feature • 360° hydraulic rotationMain Conveyor • 18" (457mm) 3-ply nylon core vulcanized spliced belt with hot melt and no staples or mechanical splices • Maximum rated 360 cubic yards an hour (275m3/hr) • Infinitely variable belt speed control from 0 to 100% • Spring-tensioned carbide scraper system • Active independent control of the feed and main conveyor systemsFeeder Belt • 35' (10.70m) aluminum independent hydraulic feed conveyor • 360° hydraulic rotation allowing material to be loaded from any position desired • 18" (457mm) belt can be fed by a ready mix truck, dump truck, skid-steer loader or front-end loader • UHMW polyethylene integrated folding feeder hopper handles the toughest mixes • Spring-tensioned carbide scraper systemBoom Control & Operation • Main conveyor functions controlled by Modular Boom Control (MBC) system • Single section maintenance without removing entire valve assembly • Ergonomic and lightweight standard proportional radio remote control • Independent belt speed control for main and feed conveyors • 100' (30m) proportional cable remote included (available January 2006) • Manual control backup for all functions Trunk/End Hose • Standard 8" (200mm) and 12" (305mm) tremie reducers – each with 15' (4.57m) end hoses and chain binderMaterial Handling • Handles harsh concrete mixes of any slump consistently • No special mix requirements • Places any type of flowable materialPower • Driven by two full horsepower rated air shift rear PTOs from the Mack MR 688S 400 hp engine • Low engine RPM and 135 hp (100kW) for reduced fuel costsOutriggers • Quick and easy setup in congested areas • Compact footprint • Sets up on solid or rough terrain • Front and rear outriggers hydraulically rotate out and down to a compact 17' 1" (5.20m) footprintConsult factory for options not listed.Clean Out • Requires only water to clean feeder hopper and belt • High pressure 2,500 psi (173 bar) hydraulically-driven pressure washer system • Large capacity 170 gallon (644L) water tankAdditional Standard Features • Aluminum diamond deck • Large side-mounted aluminum tool boxes • Emergency stop buttons • High quality paint finish • Operators manuals and ship-away kitAvailable Options • Rock hopper • Front-end loader hopper • Low profile hopper • Side loading channels • Oil/water tank heaters • Custom paint schemes6Use Your ImaginationTelebelts® are ideal for countless applications including:T E L E B E L T ®The PRO-VANTAGE Warranty Plan extends the coverage on all Putzmeister Telebelts® for a total of 36 months or 6,600 hours at no extra charge.5