Tube 300R - Brochure

SPECIFICATION SHEET “Fully Integrated Telecontrol device” GSM-GPRS Stand-alone self powered data logger and automation system Specification sheet ( hardware version A-0608 firmware version 4.07 ) www.elard-group.com Contact: e-mail: cabouzeid@elard-group.com P a g e | 1 GENERAL Tube 300 was developed jointly by ELARD and ANT Group. While ELARD is responsible for the concept development, marketing and sales, ANT Group is responsible for the design and manufacturing of Tube 300. Tube 300 has been designed for unmanned, stand-alone, long-life, and self-powering remote monitoring and control. It can independently acquire data from the field and send command to external devices or it can be remote controlled. Communication and remote control are via GSM network: this allows communication even in remote and inaccessible areas. Tube 300 great interconnection flexibility allows connecting it with a number of types of sensors, transducers and other devices. An optimum management of power supply consumption ensures long-lasting autonomous operation, even battery operated. The power can also be provided by the solar panels incorporated in the unit (only version T300S). It is also possible to power the device from an external source of energy. Tube 300 very compact size makes it extremely pleasant and easy to use in any situation and it minimizes its visual impact. The device has been designed to be rugged proof and theft protected. SMS and direct connection to a PC programming offers considerable opportunities to customization. For special requirements, we can develop custom versions. Tube 300 is the only solution to keep in touch with a device or a probe in a remote rural area where you don’t have any power supply available. APPLICATIONS Typical applications of Tube 300: ? Unattended acquisition and storage of data on the field ? Remote real time telemetry ? Automatic alarming ? Stand-alone automations www.elard-group.com Contact: e-mail: cabouzeid@elard-group.com P a g e | 2 ? Remote controlled automations FEATURES ? Unattended acquisition and storage without external power supply ? Automatic alarm messages triggered by field events ? On SMS ? Via Email or Ftp Available Interfaces The Tube 300 base configuration has: ? Nr. 1 Software selectable RS485/RS232 Serial port ? Nr. 2 ON/OFF outputs for activation of external devices ? Nr .2 configurable inputs (ON/OFF, analog 0-10V, analog 4-20mA) The RS485 and RS232 serial connection allow to connect almost any "intelligent" device. The two configurable inputs enable a link with simple equipment or devices (for example, a motion sensor, a sensor level etc.). The device has an embedded Tamper input, for detection of tampering, and a motion sensor to generate an alarm when the unit is moving. www.elard-group.com Contact: e-mail: cabouzeid@elard-group.com P a g e | 3 TECHNICAL CHARACTERISTICS (Hardware release A-0608 ;Firmware version 4.07) Housing Dimensions Diameter= 48mm (tube) =52mm (top threaded head) Length=465mm. Fits completely inside a 2 inch tube Material Stainless steel Weight with Battery 1300gr IP Class. IP68 (Cannot operate submersed) Connectors Bulk Head Connector- INSITU Power Battery Three options: D-7 Lithium primary. 2 x 3.6V Size D (Standard) D-14 Lithium primary. 4 x 3.6V Size D C-18 Lithium primary. 5 x 3.6V Size C Operation Time Lithium Powered model At 10 minutes/week: D-7: up to 3 years; D-14: up to 6 years; C-18: up to 3 years Communication Communication GSM four band, GPRS, SMS, Email, Ftp Antenna SMA Connector for External Antenna (2m cable) Data Access / Storage Mode Data Access via Email or Ftp Data Storage: Standard Mini-SD Memory -Data logger of up to 144 Million readings Real Time Reading through Winsitu Plus® or dedicated ANT special software www.elard-group.com Contact: e-mail: cabouzeid@elard-group.com P a g e | 4 Alarm Capability Via SMS. Programming Programming Mode Through a communication software tool via direct connection to a PC. Remote programming through GSM modem or landline modem with the dedicated ANT special software. Operation Mode 1) Up to 8 programmable events per day: data transmission, wait for call from Winsitu Plus. 2) Automatic Data Logging (Reading interval: 1 min to 24 hours) 3) Alarm Transmission 4) Data logging and Batch transmission of stored data Interfaces Serial Interfaces RS232 or RS485 software selectable (with automatic RS232 switching when a PC connection is detected) Input / Outputs 2 Outputs Open Drain (1A@24V max). (For special use. Custom firmware is required). 2 Inputs User Configurable (Digital Hi Speed Input, 0-5V Analog Input, 4-20 mA Analog Input) (For special use. Custom firmware is required). Sensors Compatibility Support Insitu Modbus, Insitu® RTRC Interface to Level Troll, AquaTroll, MP 9500; www.elard-group.com Contact: e-mail: cabouzeid@elard-group.com P a g e | 5 Operating Limits Temperature Range -20 to +70 °C Humidity 95% max n.c. Other Features Alarm The unit can generate an alarm if tilted or disconnected, if exceeds critical temperature values, parameters threshold values, or critical battery levels. Real Time Clock / Calendar High precision Built-In Real Time Clock and Calendar with Leap Year Compensation Temperature Sensor Internal Temperature Sensor. Available for Logging and Alarms generation PRODUCTS Code Description Tube300 Fully Integrated remote control and data logging Device (GSM/GPRS) Batteries D-7: Lithium primary. 2 x 3.6V Size D D-14: Lithium primary. 4 x 3.6V Size D C-18: Lithium primary. 5 x 3.6V Size C Software Extension For Multi Sensor Use GSM-KIT* Kit GSM with cable, magnetic base antenna, and power supply for the control center ANT dedicated software For remote programming independently from Win Situ *A GSM modem or landline modem are required to receive and transmit data Set-up software “Ant Tube Tool” (All versions of windows 2000, XP, NT, Vista) included For more Information and Inquiries, Please contact ELARD at: Cabouzeid@elard-group.com