Show results for
Refine by
Drinking Water Equipment & Supplies
14 equipment items found
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
2” Stainless steel 150 # raised face mounting flange, 3/4” ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Measure levels of solids or liquids with the NCR-86 with a plastic horn antenna. Precise to ≤1 mm at distances up to 393 feet. An optional swivel mount provides aiming flexibility. Operates accurately in excessive dust, hot steam, and extreme ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
4” Stainless steel 150 # raised face mounting flange, 3/4” ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The SBR II 115 is a microprocessor-driven SmartBob II remote sensor with 115 VAC, a corrosion-resistant polycarbonate enclosure, and an air inlet port. It is hazardous location approved and C/US listed for Class II, Groups E, F, and G. The AO models do not have hazardous location ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The GWR-3000 guided wave radar level sensor uses TDR time domain reflectometry to measure liquids and interface measurement in tanks up to 75 feet tall. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The GWR-2000 guided wave radar uses TDR time domain reflectometry to measure the level of solids with a dielectric constant as low as 1.3 in bins and silos up 100' ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The MCP-300 is an extended mini capacitance probe used for point-level detection in water-based liquids, with a stainless-steel tube that is user-customizable in lengths from 2.5” to 9.8”. Often used in pump rooms to protect pumps against damage caused by water leaks. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
With a built-in 4-20 mA output and integrated keypad, the SmartBob AO level sensor automatically transmits data to a PLC each time it takes a ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
3” Stainless steel 150 # raised face mounting flange, 3/4” ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Tri-clover 1” stainless steel welding ferrule ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The MCP-200 mini capacitive limit switch for solids is designed for use in non-hazardous locations, with a 0.5” NPT processing fitting and M12X1 IP66/IP67/IP69 electronic connection, three-wire electronics with IO-link, transistor, and Bluetooth operation. Other configurations and hazardous location approvals for the MCP-200 are available. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Measure solids or liquids at distances up to 393 feet with the NCR-86 metal-jacketed level sensor.This versatile radar level sensor has built-in 80 GHz frequency making it adaptable to material of any bulk density or specific ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
1” Stainless steel 150 # raised face mounting flange, 3/4” ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The MCP-100 mini capacitive limit switch for liquids is designed for use in non-hazardous locations, with a 0.5” NPT processing fitting and M12X1 IP66/IP67/IP69 electronic connection, three-wire electronics with IO-link, transistor, and Bluetooth operation. Other configurations and hazardous location approvals for the MCP-100 are available. ...