- Home
- Applications
- environmental management
Refine by
Environmental Management Product Applications For The Oil Gas Refineries Industry
173 applications found
Premium
Stuck in the pathway to closure cycle? Site remediation often follows the same routine: limited sampling, delayed results, slow ...
ByLiORA based in Saskatoon, SASKATCHEWAN (CANADA)
Premium
Envirotac line of polymers are the perfect solution for oil roads, oil pads, storage areas, and even frac pond lining. When Envirotac bonds the soil particles, it will create a tough durable surface that will withstand heavy loads and adverse weather conditions. It works better than conventional methods at a fraction of the cost. The time frame required to construct with Envirotac is greatly reduced, so you can start work ...
ByEnvironmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA)
Premium
Ocean Global has geosynthetic solutions for one of the most challenging industries, oil, and natural gas production. Our solutions are chemically compatible and engineered for long-term performance to meet the demands of the oil and gas sector. There is an increasing demand for oil and gas, but at the same time, the safety and environmental impact of this industry is questionable. Geosynthetics play a vital role in mitigating most of the ill effects of the energy sector. As with all other sectors, the oil and gas ...
ByOcean Global Non Wovens Pvt Ltd based in , INDIA
Premium
Production of oil and gas is usually accompanied by the usage and production of large volumes of water in several applications. The industry recognizes its dependency on water and is focused on minimizing its use, enhancing reuse and recycling opportunities, and improving treatment technologies and disposal options. Lenntech provides sustainable complete solutions for water and waste water treatment in oil and gas industry considering a wide range of technologies and ...
ByLenntech Water Treatment based in Delfgauw, NETHERLANDS
Premium
Oil and natural gas are part of everyday life. Together, these fossil fuels represent 86 % of global energy demand. Products produced from oil and gas are used throughout the world as fuel (such as gasoline and diesel fuel), or as building blocks for the petrochemical and chemical industries. The process to extract, transport and refine oil and gas is complex and wrought with danger to workers and to assets. One of the most dangerous is the risk of fire or explosion due to the presence of flammable gases and ...
ByTeledyne Gas and Flame Detection based in Arras Cedex, FRANCE
Premium
Genesis Water Technologies understands the consistently evolving and increasing demands to treat flowback produced water in the oil & gas industry. In addition, we understand the necessity for sustainable produced water treatment solutions to handle the evolving regulatory, fiscal and environmental challenges faced by this industry. Decreased availability of water and increased environmental regulations relating to produced water from unconventional shale gas exploration “hydraulic fracking” and ...
ByGenesis Water Technologies, Inc. based in Maitland, FLORIDA (USA)
We help chemical, oil and gas organizations protect and improve their supply ...
ByBSI Consulting based in Herndon, VIRGINIA (USA)
After immersion, oil and gas are structures are colonized by marine organisms (anemones, mussels, sponges, and algae) that grow on the structure itself (biofouling). With submerged structures that have been decades in the water, biofouling becomes a problem when decommissioning obsolete oil- and gas-structures (biofouling can make up to 10-12% of the weight of the structure being removed). Owners of oil and gas installations are required to discontinue their offshore infrastructure at the end of the field's ...
ByBravo Marine AS based in Haugesund, NORWAY
The US EPA has determined that leaking equipment, such as valves, pumps, and connectors, are the largest source of emissions of volatile organic compounds (VOCs) and volatile hazardous air pollutants (VHAPs) from petroleum refineries and chemical manufacturing ...
ByOil & Gas Technologies (OG-TECH) based in Aix-en-Provence, FRANCE
Improve quality in used and treated water. Uncontrolled algal growth in water bodies can lead to high levels of pH, BOD and TSS, making the extraction process, wastewater treatment and its disposal difficult. Treating algal blooms and monitoring water quality with LG Sonic technology improves water parameters, reduces further costs and productivity impacts, and prevents equipment clogging with minimal ...
ByLG Sonic B.V. based in Zoetermeer, NETHERLANDS
The Global Leader in Handling and Treating Complex Water and Fluid Challenges. The Energy Services segment has, for decades, been the recognized leader in serving two major markets: Oil & Gas and Industrial Wastewater, providing innovative products, services and solutions, and handling and treating COMPLEX water and fluid challenges, cost effectively for their customers worldwide in 14 locations and 10 ...
ByCETCO based in New York, NEW YORK (USA)
Liquid level and flow monitoring is seen in many applications across the oil and gas sector. From fracking to tank level measurement, there are many different advantages to having efficient and accurate level and flow monitoring in all aspects of operations. Enabling operators to effectively monitor stock leves, flow rates and asset performance, as well as aiding businesses with compliance, data monitoring and reporting. Pulsar Measurement produce a wide range of industry solutions that are tailored to meet your ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
ByAntech Hydraulics Ltd based in Poulton-Le-Fylde, UNITED KINGDOM
Almost all industries including Oil & Gas industry, petrochemical industries, power plants, ( Coal-fired, Combined cycle, Nuclear power plants), steel mills, and cement industries, require water for cooling purposes. In such an environment many types of organisms, pathogens, and algae will grow in the circulating facility/equipment leading to micro-macro fouling reducing the cooling system efficiency, and eventually plant performance. Especially when the coolant is coming from seawater intake rather than ...
ByULTRANODE based in Ottawa, ONTARIO (CANADA)
It is estimated that there are over 3,000 former Manufactured Gas Plant (MGP) sites across the United States. Another 4,000 dot the landscape of Canada, the UK, continental Europe and Japan. These sites were built long ago on rivers or harbors, often on the outskirts of towns and cities; locations that are now frequently in close proximity to infrastructure, buildings and residential areas. Many underlie or abut valuable commercial, residential, and municipal properties, posing environmental hazards to ground and ...
ByTerraTherm - a Cascade Company based in Gardner, MASSACHUSETTS (USA)
We can offer you systems that are capable of operating in the harshest of environments. We design and manufacture a range of systems that meet some of your industries most challenging ...
ByOvarro based in Eckington, UNITED KINGDOM
Soft Ground Solution for Site Access Roads & Oil Pads. Build stable, low-cost access roadways and oil pads with the fastest to deploy, and fast to install GEOWEB system. The 3D GEOWEB system outperforms geogrids. GEOWEB roads provide access over soft soils with just a single layer, require less surface maintenance and allow the use of onsite infill for added savings. GEOTERRA mats are the safest construction mats in the industry for creating oil platforms, helipads and equipment storage. No heavy equipment is ...
ByPresto Geosystems based in Appleton, WISCONSIN (USA)
Supported by the global reach of its mature and dedicated distributor network, Crowcon has an enviable track record in the oil and gas industries. Read on to learn more about the applications, challenges and gas detection solutions typically seen in this demanding industry, or learn about how Crowcon recently helped Indian company Cairn Energy at their Mangala oil and gas processing facility. ...
ByCrowcon Detection Instruments Ltd based in Milton Park, UNITED KINGDOM
This method allows the analyte to be pre-concentrated in the final solution, decreases the volume of strong acid used in the dissolution stage and does not use organic ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Tanks used in this field are typically referred to as ‘frac’ tanks, the 500 barrel Frac Master being the industry benchmark. ‘Frac’ is an abbreviation for fractionation, a term that refers to an actions which occur when bringing a new well online or reworking an existing well to stimulate existing ...
ByPinnacle Manufacturing based in Boaz, ALABAMA (USA)