Only show results in Massachusetts? Ok

EHS for Nanotechnology equipment for Environmental Management

  • 3 mesh - Model 1-6mm - Spacer Fabric

    Thin 3mesh spacer fabric permits a high functionality without impairing the design of the commodity. Due to the excellent surface feel, extremely high air circulation and the very low weight 3mesh is particularly suited for all applications which are exposed to high pressure and have to fulfil the demand for modern design at the same time.

    By Müller Textil GmbH based in Wiehl Drabenderhöhe, GERMANY.

  • Ultra Sensitive Transducer

    It seems that every week new applications for nano manufacturing are being announced. Nanotechnology deals with small groups of atoms down to 10-9 m in size. Angstro technology works with individual atoms or molecules at the next smaller level, the Angstrom: ten-billionths of a meter. Today, research done by A-Metrics, LLC makes this truly ...

    By A-Metrics LLC based in Charlotte, NORTH CAROLINA (USA).

  • Nanoparticle Surface Area Monitor Model 3550

    Occupational health risks associated with using and manufacturing nanoparticles are not clearly understood. Workers may inhale and be exposed to levels that greatly exceed ambient levels. Leading experts contend that surface area, rather than mass, should be measured for nanoparticles, because nanoparticles have far more surface area for the same ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Nanoparticle Surface Area Monitor Model 3550 Product line

  • Qsonica - Model Q500 - Sonicator

    The Q500 is a powerful ultrasonic processor featuring programmable operation and a digital display of operating parameters. Popular applications include nanoparticle dispersion, creating emulsions, cell lysis and homogenization.  Adjustable pulse On and Off times can be programmed from 1 second to 1 minute. ...

    By Qsonica, LLC. based in Newtown, CONNECTICUT (USA). from Sonicator Product line

  • Vertically Aligned Carbon Nanotubes (VA-CNTs)

    Our Vertically Aligned Carbon Nanotubes (VA-CNTs) are grown on Stainless Steel and Silicon substrates.

    By FastCAP Systems Corporation based in Boston, MASSACHUSETTS (USA).

  • Enerworks - Vacuum Tube Collector

    Enerworks uses NARVA vacuum tubes made in Germany. Due to NARVA’s 40-years of experience in the field of glass manufacturing and processing, their extensive knowledge about coating and vacuum processes, as well as experience in the field of glassmetal-compounds, they have been able to realize the production and process for creating top ...

    By Enerworks Inc based in Woodstock, ONTARIO (CANADA). from Vacuum Tube Collector Product line

  • AEROTRAK - Model 9000 - Nanoparticle Aerosol Monitor

    The AEROTRAK™ 9000 Nanoparticle Aerosol Monitor indicates the surface area of nanoparticle aerosols that deposit in the lung, corresponding to the ICRP lung deposition curves for the tracheobronchial (TB) and alveolar (A) regions of the human respiratory tract. The AEROTRAK™ 9000 monitor is a portable, battery-operated diffusion ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Nanoparticle Aerosol Monitor Product line

  • AEROTRAK - Model 9000 - Nanoparticle Aerosol Monitor

    The AEROTRAK™ 9000 Nanoparticle Aerosol Monitor indicates the surface area of nanoparticle aerosols that deposit in the lung, corresponding to the ICRP lung deposition curves for the tracheobronchial (TB) and alveolar (A) regions of the human respiratory tract. The AEROTRAK™ 9000 monitor is a portable, battery-operated diffusion ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Nanoparticle Aerosol Monitor Product line

  • CleanGrow - Combi-ISE

    A combination ISE probe that comes with a 1 meter cable ending in a BNC connector.If you need a meter and solutions as well, please look at the kit optionHead contains 1 leak-less Ag/AgCL reference electrode and 1 ISE sensor tip of choice. The sensor or reference can be removed and replaced.Our unique combination ion selective sensors ...

    By CleanGrow based in Vacaville, CALIFORNIA (USA).

  • Optofluidics - Model NanoTweezer - Trap and Analyse Nanoparticles System

    A platform for amazing nanoparticle manipulation. Hold on to individual nanoparticles while observing them in real time with your existing microscopy equipment. The microfluidic infrastructure allows you to simultaneously manipulate the environmental conditions (e.g. pH) or introduce new agents to the trapped particle.

    By Optofluidics, Inc. based in Philadelphia, PENNSYLVANIA (USA).

  • DynaPro - Model II - Plate Reader

    Revolutionize your performance by replacing your conventional, cuvette-based dynamic light scattering unit with the automated DynaPro® Plate Reader III. The DynaPro excels at high-throughput sizing and screening of pharmaceutical and nanoparticle formulations to enable novel workflows that simply would not be possible with other DLS ...

    By Wyatt Technology Corporation (WTC) based in Santa Barbara, CALIFORNIA (USA). from Plate Reader Product line

  • Sepax - Model CNT - Nano-Material Separation Columns

    Utilizing proprietary surface technologies, the Sepax CNT SEC phases are made of specially coated porous silica materials. The silica support has high purity and enhanced mechanical stability. The Sepax CNT SEC phases have been innovatively and specially designed to ensure highest resolution and maximum recovery for the separation of nanotubes, ...

    By Sepax Technologies Inc based in Newark, DELAWARE (USA). from Nano-Material Separation Columns Product line

  • Surfapore M

    Nanotechnology for protecting porous surfaces, marbles and granites from oil, water and stains.This product has all the properties of SurfaPore T but in addition, is a repellent against oil stains, ideal for kitchen areas, especially around the cooker worktops and floors SurfaPore M can tolerate extremely high temperatures. Its unique formulation ...

    By NanoTech (UK) Solutions Ltd based in Abbotsley, UNITED KINGDOM.

  • 3 mesh - Model 6-20mm - Spacer Fabric

    Soft cushioning and air permeability for high functionality. In the case of ductile cushions security and reliance play crucial roles. Only if the material adapts to the body perfectly, humans feel wholly comfortable. For ventilated seats in the automotive industry, stability and air permeability are key. The following things are therefore ...

    By Müller Textil GmbH based in Wiehl Drabenderhöhe, GERMANY.

  • AMD - Model M60 - CLS System for Cluster Ion Deposition

    Special High Mass Magnetic Analyzer for Applications in Nanotechnology.

    By AMD Analysis & Technology AG based in Harpstedt, GERMANY.

  • Nanoparticle Surface Area Monitor Model 3550

    Occupational health risks associated with using and manufacturing nanoparticles are not clearly understood. Workers may inhale and be exposed to levels that greatly exceed ambient levels. Leading experts contend that surface area, rather than mass, should be measured for nanoparticles, because nanoparticles have far more surface area for the same ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Nanoparticle Surface Area Monitor Model 3550 Product line

  • AEROTRAK - Model 9000 - Nanoparticle Aerosol Monitor

    The AEROTRAK™ 9000 Nanoparticle Aerosol Monitor indicates the surface area of nanoparticle aerosols that deposit in the lung, corresponding to the ICRP lung deposition curves for the tracheobronchial (TB) and alveolar (A) regions of the human respiratory tract. The AEROTRAK™ 9000 monitor is a portable, battery-operated diffusion ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Nanoparticle Aerosol Monitor Product line

  • Conformal Printed Antenna

    A new high volume process is available that lowers manufacturing costs for antennas used in mobile devices. The new process works with standard injection molded plastics – no special additives or coatings are required. Based on Aerosol Jet technology, the digital process prints conformal antennas using conductive nanoparticle silver inks. ...

    By Optomec Inc. based in Albuquerque, NEW MEXICO (USA).

  • ProFlex™ - Laser Fiber Scoring Wafer

    Standard 1” x 1” X 0.025” square, 98% alumina wafers (Al2O3) are commonly used to score optical fibers for tip  reprocessing. ProFlex™ wafers have a handy metric scale imprinted on one edge and are twice as long as common scoring wafers (aka 'cleaving stones') for easier scoring.

    By InnovaQuartz LLC based in Phoenix, ARIZONA (USA). from Laser Fiber Scoring Wafer Product line

  • DropSens - Nanomaterials Electrochemical Reagents

    Single- and Multi-Walled Nanotubes produced through CVD (Chemical Vapor Deposition). Also functionalized with -COOH and -NH2 groups. Suitable for mechanical and electrical applications. Nickel Nanowires and Gold Nanowires produced via electrochemical deposition in an alumina template. Different solutions: Carbon Nanofibres Solution, Carbon ...

    By DropSens based in Asturia, SPAIN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you