EHS for Pharmaceutical Industry Applications

33 Results found
Only show results in Virginia?
OK
  • Category: Environmental Management ×

  • Subcategory: EHS for Pharmaceutical Industry ×

High-calcium lime slurry for industrial (chemicals & food processing) sector

by Sudbury Lime Ltd.     based in Copper Cliff,, ONTARIO (CANADA)

Lime is used in many industrial applications to treat plant processing water and as a key ingredient in the production of chemicals and the food processing industry.

Freeze Drying

by Hiden Analytical     based in Warrington, UNITED KINGDOM

Lyophilization, commonly referred to as freeze drying, is the process of removing water from a product by sublimation and desorption. The freeze drying process is optimised by the introduction of solvents and gas species to improve product quality and to enhance the drying process. Hiden's gas analysers provide detailed information about the gas/vapour composition during both the primary and secondary drying phases. Detection of the on-set of the secondary drying phase is readily detected. Analysis during the secondary drying phase enables a reduction in process cycle time and provides end point detection. Accurate determination of a user defined process 'end point' enables high consistency in product yield from batch to batch.

Water treatment chemicals for the refinery and petrochemical industry

by Kurita     based in Ludwigshafen, GERMANY

Highly complex processes in refinery and petrochemical plants demand the competent handling of operational facilities and products. Water and process treatment also have to meet these requirements in order to ensure plant and system safety. Kurita offers you precisely this security: with decades of experience, we advise and support you in the various fields of application. Take advantage of our know-how and our customer proximity.

Water treatment for the pharmaceutical industry

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

The pharmaceutical market is at the center of personal care, serving to protect public health and improve the quality and span of life. This global market requires treatment technologies to disinfect, measure, control and filter process water and wastewater generated from production.

Solutions for the chemical industry

by DMT Global Environmental Solutions BV     based in Joure (NL), NETHERLANDS

Many organizations in the industrial sector are investigating possibilities to improve their (sustainable) energy profile. The renewable energy sector currently offers a broad scale of options with significant capacity for growth and new projects and expanding upon existing infrastructures. In the industrial sector, biogas can replace the current natural gas consumption. DMT has extensive experience within various industries and knows her way around. For more than 28 years we have been advising our customers on reducing CO₂ and SOx emissions, wastewater treatment and (bio)gas desulphurisation and upgrading.

Air pollution control for the petroleum processing and petrochemical industries

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

The petroleum processing and petrochemical industries place a large emphasis on engineering quality, safety and reliabiliy. With our extensive experience on various processes in these industries, Anguil is the perfect partner to meet these concerns.

Air pollution control for the pharmaceutical industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

From pill coating and mixing operations to Ethylene Oxide (ETO) sterilization, Anguil has had great success solving a wide range of emission control applications in the pharmaceutical industry. As companies struggle to comply with the EPA`s MACT (Maximum Achievable Control Technology) standards or international regulations, it is comforting to know that Anguil thoroughly understands your process. Over three decades of experience treating halogenated, VOC and HAP process streams enable us to efficiently solve your pollution control problems.

APHA Color #3020

by Guided Wave Inc,     based in Rancho Cordova, CALIFORNIA (USA)

Measurement of APHA color either on-line or in a laboratory setting using a photometer. Background: APHA is sometimes referred to as the Platinum Cobalt (Pt/Co) or Hazen scale. Also referred to as a “yellowness index”, the APHA color scale is a common method of comparison of the intensity of yellow-tinted samples to assess the quality of liquids that are clear to yellowish in color. Originally developed to determine the purity of municipal water supplies, it is now used as a metric for purity in the water, chemical, oil, plastics, and pharmaceutical industries. APHA color quantifies the appearance of trace amounts of yellowness, which is a visual indicator of product degradation due to exposure to light or heat; the presence of impurities and negative effects of processing. As such APHA color is often used as a product release specification. APHA is a single number yellowness index. The units are based on a dilution of a 500ppm solution of PtCo.

Several waste gas streams: Short, high concentration peaks and a constant |medium concentration

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

Concentration peaks and liquid waste posed a tough challenge on the air pollution control system. With the CTP solution, this waste is not only disposed of but also reduces the burner energy considerably.

Industrial air pollution control for the pharmaceutical industry

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

The pharmaceutical industry is one of the most important and growing industries worldwide. Personal well-being is becoming ever more important, and the accelerating ageing effect consequently gives rise to increased expenditure on pharmaceuticals and medicine. CTP air pollution control systems not only focus on pharmaceuticals and generics, but also on applications in medical supplies, ranging from bandages and associated materials to medical and plastic implants.

Wastewater treatment for the chemical and pharmaceutical industry

by Toro Equipment S.L.     based in La Cistérniga, SPAIN

Presence of colouring, additives, nonbiodegradable organic contents or presence of biological process inhibitors. Besides, they are highly corrosive which is why we manufacture our equipments using materials especially adapted to the working conditions. An effluent containing a great quantity of suspended and dissolved organic material.

Industrial and commercial water filtration for process water

by Hydro-Gen Engineering Ltd     based in Widnes, UNITED KINGDOM

Filtration for Process Water is a widely used term and has a great number of uses dependent on the operation. Filtration for process water or water purification is a process where any undesirable contaminants are removed from the water to ensure it’s suitable for its intended use. The filtrat0ion of process water does not always have to be for drinking water for humans but can also refer to water purification for the use of industrial or commercial applications in a variety of industries include pharmaceutical, chemical, Paper and Textiles, Steel,  Food and Beverage, Plastics, Automotive and many more.

Trislot screens for the pharmaceutical industry

by Trislot N.V.     based in Waregem, BELGIUM

Trislot screens have many applications also in the pharmaceutical industry. Besides the classical application in water treatment systems (ion exchange, molecular sieve,... ) the screen are used for classification and in dryers/coolers. The Sintered Laminate is used in Nutsche filters for the pharmaceutical industry.

Electrical Based Tomography Systems for Crystallisation/Precipitation

by Industrial Tomography Systems plc (ITS)     based in Manchester, UNITED KINGDOM

Crystallisation is a key reaction in pharmaceutical and other process sectors. The combination of two ionic species in solution to form a solid frequently produces a strong change in electrical properties which can be tracked using ITS electrical resistance tomography sensors. Sensor arrays are produced on two different formats:

Ultra pure water treatment

by Lenntech Water Treatment     based in Delft, NETHERLANDS

Ultra pure water is mainly used in the semi conductor and pharmaceutical industry. Because of the continuing miniaturilisation in the semi conductor industry, the specifications become more strict every year. Ultra-pure water contains by definition only H20, and H+ and OH- ions in equilibrium. Therefore, ultrapure water conductivity is about 0,054 uS/cm at 25oC, also expressed as resistivity of 18,3 MOhm.

Waste recovery for petrochemical wastes

by Tetronics (International) Limited     based in Swindon, UNITED KINGDOM

Traditionally, the Petrochemical Sector has operated with basic technological solutions, with ultimate reliance on High Temperature Incineration (HTI) and landfill in order to deal with their hazardous wastes. However, tightening regulation, increasing landfill costs and social responsibilities are driving companies to look at alternative methods of treatment of very challenging wastes, including the treatment of:

Industrial solutions for chemical and petroleum industry

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

With expertise in water and wastewater treatment, oil/water separation, liquid/liquid and liquid/solids separation, WesTech works closely with professionals in the petroleum and chemical industries. We are able to move fast to provide proven solutions and process infrastructure that keep production up and product flowing.

Evaporators technology for chemical industry

by EVALED - Veolia Water Technologies     based in Zoppola (PN), ITALY

Water is one of the most important solvent or component in the chemicals production industry. From the production of water as a solvent for formulas, to the water used for mixers and reactors washing operations, the management of the whole water cycle from inlet to final discharge is a primary importance issue to face.

Need help finding the right suppliers?

Let the XPRTs do the work for you