Only show results available in Virginia? Ok

EHS for Shipping Applications

  • Premium

    Water treatment solutions for shipping industry

    Hygienically pure potable water and clean swimming pools on board cruise ships. Reliable water treatment solutions are crucial on board ships. ProMinent has both the necessary know-how and extremely precise metering technology to deliver the best water quality 24 hours a day.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Monitoring solutions for the marine industry

    While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex VI aims to reduce emissions from ships through international regulations, which hopefully will discourage states from enacting unilateral regulations problematic to the shipping industry.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Several waste gas streams: Short, high concentration peaks and a constant |medium concentration

    Concentration peaks and liquid waste posed a tough challenge on the air pollution control system. With the CTP solution, this waste is not only disposed of but also reduces the burner energy considerably.

  • Premium

    Electrochemical solutions and water technologies for marine industry

    In the marine market, ocean-going vessels and fresh water or inner coastal boats require water treatment technologies to meet drinking water, process water and wastewater requirements. Offshore oil and gas operations and ocean-going vessels generate sewage that can contain contaminants which have a detrimental effect on water quality and the overall marine environment. As a result, marine sewage treatment systems are required to lessen the environmental impact. The MEPC.227(64) effluent standards, adopted by the International Maritime Organization’s Marine Environment Protection Committee, apply to all sewage treatment systems installed on board on or after January 1, 2016.

  • Premium

    EDXRF spectrometers for marine emission control

    The IMO (International Maritime Organization) continuously sets new standards in order to minimize and control the harmful polluting exhausts from vessel engines. IMO is the World’s largest maritime organization with over 170 member states and acts as a regulatory agency for the international maritime industry.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Premium

    Organic waste shredding with Mercodor shredding systems

    The organic waste shredding of food waste and other organic wastes are used to prepare an environmentally friendly energy, for example in biogas plants. In addition to the production of electricity or heat through biowaste serve shredded organic waste / food and the production of biodiesel. The organic waste shredding is used wherever a longer storage of bio-waste is really necessary, such as on cruise ships.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Shredding and crushing systems for Food waste and handling of garbage and food waste

    Organic waste can become a problem anywhere where the disposal of waste occurs over a longer period. This challenge arises for example in the shipping industry. With Mercodor waste food shredders valuable space is saved and food protected from contamination. The processed food leftovers serve as the raw material for biodiesel production or are used for the production of green energy in the form of electricity and heat from biogas plants.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Piping & ducting solutions for the marine industry

    PROCO Products designs and manufactures durable, low-maintenance check valves for use specifically in marine industries, such as sewage treatment plants, outfalls, and tidal operations. Marine and aquatic conditions are unique and require equipment that can withstand the turbulence, wear, and corrosion that can occur. PROCO Products provides you with items that can endure even the most rigorous environments. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • Premium

    Actuators for the marine industry

    Rotork specialise in producing actuators and related equipment for every part of the ship building industry. We have over 50 years` experience in serving ship builders and operators and we understand the challenges faced. Rotork valve actuators are widely recognised as being the most technically advanced, reliable, long life, watertight and user-friendly actuators in the business.

    By Rotork based in Bath, UNITED KINGDOM.

  • Premium

    Ambient air quality monitoring solutions for remote sensing of ship emissions

    New regulation forces ships to lower the emissions of SO2. Ships travelling in SECA areas has to either run on low sulphur fuel, or install SO2 scrubbers. To measure the SO2 emissions from a ship is not an easy task. OPSIS provides the Port Authorities with a unique measurement principle where the emissions from the ship is measured remotely. Light is passing the emissions and by analyzing the light, concentrations of SO2 can be measured.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Marine monitoring solutions for the O2 oxygen monitoring

    OPSIS provides various monitoring solutions for marine vessels. One application is to monitor in Inert Gas Generators (IGG) onboard ships to control the quality of the nitrogen. The reliable systems supply accurate values continuously, and presents it directly to the control system.

    By Opsis AB based in Furulund, SWEDEN.

  • Marpol Shredders for Marine Industry

    SA Eng manufactures industrial shredders dedicated to the marine industry, in compliance with the MARPOL 73/78 regulations - V, about the shredding of the food waste before it is discharged into the sea. The machines, as required by the legislation itself, guarantee a final size below 25mm. The shredders, designed to be installed on board of cruise ships, ferries, offshore platforms can also treat light material such as paper, cardboard, cans, plastic bottles etc.

    By SA Eng Soluzioni per l`Ambiente based in San Donà di Piave, ITALY.

  • Marine envrionmental solutions for public sector organisations

    Fugro EMU Limited has extensive experience in working closely with public sector organisations concerned with the marine and coastal environment. A number of projects have been carried out on behalf of marine regulatory organisations and government departments, including specialised geophysical and ecological surveys, technical reports and provision of expert advice. This work covers a range of topics, including but not limited to:

    By Fugro EMU Limited based in Portsmouth, UNITED KINGDOM.

  • Nitrogen generation for the Marine, Oil & Gas industry

    Marine conditions pose a number of challenges and issues. Size, weight, rough sea conditions, corrosion, high temperatures, cargo needing protection, just to name a few.Oxymat’s Marine, Oil & Gas division produces nitrogen PSA generator systems to the marine industry with the necessary experience and know-how to address these issues. Compared to a traditional membrane based system, PSA systems significantly decrease redundancy and can cut energy consumption with up to 30%. In addition, a PSA system can produce 5% or lower oxygen levels.With the highest quality in components, PSA systems are extremely reliable with at least 48.000 running hours before CMS replacement is needed.

    By Oxymat A/S based in Helsinge, DENMARK.

  • Waste management for ships and sea platforms

    For those who have lived in the arms of the sea, the bond is powerful and eternal. When mariners discharge waste into the sea, it is not carelessness but desperation…a last resort used in the absence of practical alternatives. The waste generated on every ship comes from both people and machinery. People generate garbage and sewage. The various motors and shafts generate used oils, dirty rags and a wide variety of other waste. The mariner has three options for all this waste: (i) store it on board and discharge it at the next port; (ii) treat it on board; or (iii) discharge it at sea. Today, none of these options are practical.

    By Terragon Environmental Technologies Inc. based in Montréal, QUEBEC (CANADA).

  • Spill control for marine and offshore

    By Antech Hydraulics Ltd based in Poulton-Le-Fylde, UNITED KINGDOM.

  • CleanAll Heavy

    Application : OIL SPILL DISPERSANT :THE BEST SOLUTION TO ELIMINATE THE SEA WATER POLUTION BY SAFE WAY Huge oil tanks. Oil tankers and commercial vessels. Harbors (land ,marine &air strips) Excavators oil wells. Petroleum Rigs and pipes

    By PETROGLOBE CO. based in Cairo, EGYPT.

  • Marine envrionmental solutions for water sector

    Fugro EMU Limited has an extensive history of supporting clients in the water sector, with over 20 years’ experience in this field. Building on our long established relationships with water sector clients, Fugro EMU offer an integrated approach to the project management and delivery of consent application, investigational studies, surveys, monitoring and reporting. Fugro EMU offers technical expertise and a complete understanding of the consent and legislative requirements that shape the needs of our water sector clients both within the UK and abroad.

    By Fugro EMU Limited based in Portsmouth, UNITED KINGDOM.

  • Applications and Air Pollutants Removed for Marine Power Plants

    Control of ship diesel engine emissions to meet MARPOL requirements for particulate ash and soot, sulfur dioxide and NOx. Special compact inline stack mounted space saving designs. Both open loop arrangements using sea water or closed loop using a range of chemical solutions.  Complete system offerings.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Balers and compactor solutions for marine & offshore industry

    All ships and offshore platforms with more than 15 people must comply with the MARPOL Annex 5 and the International Maritime Organization regulations. A Bramidan baler is safe at sea – and makes waste handling easy.

    By Bramidan Balers based in Bramming, DENMARK.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you