Only show results in Massachusetts? Ok

Environmental Impacts Applications

  • Premium

    Liquid/solid separation equipment for paste thickening and backfill

    Mine backfill is defined as the material used to fill the cavities (i.e., stopes) created by underground mining. Backfilling can be a means to dispose of sludge and/or tailings which may contain hazardous materials and to reduce surface environmental impacts by storing tailings underground. Alternately, backfilling with nonhazardous materials can allow for mining productivity improvements. To these materials are added a variety of fillers such as fly ash, course sand, or gravels along with a binder, such as...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Gas analyzers and monitoring systems for fire & material testing

    Sampling and analysis of fire effluents is an important part of assessing both the environmental impact and the threat to life caused by fires. Detailed knowledge about the composition and concentration of fire effluents is required to gain a good understanding about the potential impacts of fires and for efforts to diminish these impacts. Testing the composition of these fire effluents presents a challenge for the analytical equipment used to measure the gases. The amount of species and concentrations of...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Mineral fuel & lube oil

    Pieralisi offers technological solutions for fuels cleaning and treatment, for lube oils purification, for the conditioning and recovery of mineral oils, industrial or environmental slop oils, bottom tank residues and bilge water. Furthermore, our easy and efficient solutions are aimed to reduce the operating costs and protect the environment.

    By Pieralisi Group based in Jesi, ITALY.

  • Premium

    Jaw bucket crushers for agricultural & grounds maintenance

    There are areas in which complete respect for the environment is a fundamental must. Consider, for example, the creation or maintenance of public parks, both in urban and rural areas, or worksites in agricultural areas. MB`s range permit the immediate crushing, recycling and reuse of materials for the completion of works in total respect for the natural characteristics of the area.

    By MB Crusher based in Fara Vicentino, ITALY.

  • Premium

    Solutions for waste water treatment

    Very low-impact treatment for waste water. Our water treatment technology delivers thorough yet environmentally friendly waste water treatment. What`s more, with precisely metered additives and optimised processes, you also save money.

    By ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Water treatment chemicals solutions for automobile manufacturing industry

    When automobiles are manufactured, each vehicle is painted by spraying a mist (paint mist) onto the car body and other parts. This process is referred to as the paint booth, and it ensures the beautiful finishing of car bodies and components and rust proofing. The excess paint that does not to cling to the car body and parts in the paint booth falls to the floor and is collected by water. This water is used as recycling water after removing the paint with water treatment chemicals.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Gas analyzers and monitoring systems for Industrial hygiene

    Indoor air quality is a key part of industrial hygiene. Measuring a vast variety of compounds simultaneously helps to ensure that the air quality doesn’t threaten the health of people. Portable Gasmet gas analyzers are the ideal solution for industrial hygiene measurements.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Special plants for recycling of electronic waste (WEEE)

    Proper disposal of electronic waste (WEEE) and of waste in the R4 category, i.e. waste such as electrical and electronic equipment, allows the recovery of a large number of precious metals and components.

    By Forrec srl based in Santa Giustina in Colle, ITALY.

  • Premium

    Hydrological and environmental monitoring Systems for Water resource management industry

    Water resource management refers to the conservation, custody and transport monitoring of water as a natural resource. Measurements are made to quantify water for the purpose of protection, forecasting, management, lawmaking, enforcement, policymaking, resource allocation and public reporting. Stevens has been providing quality products for water management for over 100 years.

    By Stevens Water Monitoring Systems, Inc. based in Portland, OREGON (USA).

  • Premium

    Anaerobic water purification systems for sulphate removal/recovery

    Sulphate is a common chemical in industry.

    By Paques Technology B.V. based in EL Balk, NETHERLANDS.

  • Premium

    Wastewater treatment plants for breweries

    Brewery wastewater is generally polluted with two different classes of pollutants. In the direct brewing process, biological substances such as yeasts, starch or sugar compounds are increasingly introduced into the wastewater. By cleaning brewery plants (boilers, pipelines, etc.) and washing empties, large quantities of chemical cleaning detergents are also discharged into the wastewater of breweries.

    By ATB WATER GmbH based in Porta Westfalica, GERMANY.

  • Premium

    Odour nuisance assessment for industrial facilities

    Assessment of odour impacts from industrial facilities is increasingly required for planning and IPPC/EPR permitting. CERC carries out odour impact assessments to investigate odour nuisance complaints, to predict the likely impact of new and existing facilities, and to evaluate the impact and cost effectiveness of various odour control strategies. In order to carry out a robust assessment of odour impact, whether to evaluate a proposed facility or get to grips with an odour nuisance problem, it is important to...

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    Tissue Homogenizers – Sample preparation for Environment

    Soil and environmental analysis often focus on microbiology studies and pollution impact on wildlife. Microorganisms included in a biological matrix are particularly challenging to lyse.

    By Bertin Instruments based in Montigny-le-Bretonneux, FRANCE.

  • Premium

    Activated carbons solutions for flue gas & mercury sector

    In many industrialized nations it is common practice to use incineration methods for waste disposal. There are also ways to recover energy from the process. However, operating an incinerator requires strict adherence to environmental regulations. Hazardous, clinical and waste to energy incinerators can benefit from our EcoSorb range of activated carbon. Specially designed to adsorb unwelcome airborne compounds from flue gases.

    By Jacobi Group based in Kalmar, SWEDEN.

  • Premium

    Air quality management at airport consultancy

    We provide consultancy on aviation and air quality, such as dispersion modelling and emissions inventory compilation for environmental impact assessment at airports. We also conduct research into aviation.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    Emissions Monitoring for Airports

    Opsis systems provide high-performance monitoring of the emission activities within an airport. The rapid system allows on-line monitoring of the emissions from each aircraft at take-offs and landings, monitoring of fugitive emissions from stationary sources and differing of the airport sources from the surrounding pollution sources.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Special plants for recycling of refrigerators

    FORREC produces systems for the correct treatment of WEEE in the R1 category: refrigerators and electronic cooling appliances in general. WEEE waste in the R1 category may prove to be hazardous if it is not treated with due care. The danger of such appliances is due to the presence of refrigerants that are harmful to the atmosphere (CFC, R21, R22 and R600).

    By Forrec srl based in Santa Giustina in Colle, ITALY.

  • Premium

    In-situ reduction technology for groundwater remediation industry

    Nanoremediation represents a modern method of treatment of environment polluted by chlorinated hydrocarbons, heavy metals, radionuclides and other contaminants. This technology started to be used tentatively in USA and it already takes place on various sites around the world at present.

    By Nano Iron s.r.o. based in Židlochovice, CZECH REPUBLIC.

  • Premium

    Odour nuisance assessment for agricultural facilities

    Assessment of odour impacts from agricultural facilities is increasingly required for planning and IPPC/EPR permitting. CERC carries out odour impact assessments to investigate odour nuisance complaints, to predict the likely impact of new and existing facilities, and to evaluate the impact and cost effectiveness of various odour control strategies. In order to carry out a robust assessment of odour impact, whether to evaluate a proposed facility or get to grips with an odour nuisance problem, it is important to...

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    Mercury monitoring for mercury flux measurement

    The Tekran 2537 has been used in numerous published studies to measure the deposition or evasion of mercury from natural or contaminated surfaces (i.e. flux measurements). It is anticipated that many mercury flux measurements will be needed in the future to assess the impact of climate change on mercury cycling in the environment. There are two basic ways to do mercury flux measurements. First, the dynamic flux chamber method utilizes a custom enclosure, with controlled air flow, to measure the inlet and outlet...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you