Only show results available in Virginia? Ok

Greenhouse Gas Applications

  • Hydrocarbons monitoring

    Hydrocarbons are a family of organic chemicals consisting of carbon and hydrogen atoms arranged in a variety of ways. Hydrocarbons are found naturally in crude oil and are released into the environment with its combustion (power plants, home heaters etc).

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Mandatory GHG Reporting

    Our Impacts can help companies listed on the London Stock exchange to comply with their new Mandatory Carbon Reporting duties, laid out in The Companies Act 2006 (Strategic Report and Directors’ Report) Regulations 2013, which requires around 1,100 of the UK’s largest listed companies to report their greenhouse gas emissions every year.

    By Ecometrica based in London, UNITED KINGDOM.

  • Environmental monitoring solution for mineral processing

    Measurement of particulates, SO2, NOX, CO, hydrocarbons and greenhouse gas emissions from the mineral process industries requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Moisture Monitoring for SF6 / Air Circuit Breakers

    SF6 (sulphur hexafluoride ) or air is used as an insulation gas in circuit breakers . Excess moisture in these gases causes arcing, which can trip the circuit breaker and cut off power to the distribution network. More seriously, such arcing can lead to physical damage of equipment and, on occasion, death of plant operatives (please ask for our case study on circuit breakers).

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Greenhouse gas monitoring for regulations and compliance consultancy

    Kurz thermal mass flow meters exceed the certification levels required by the Mandatory GHG Reporting regulation and are approved for these applications.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Carbon capture and storage (CCS) applications

    Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of both nitrogen and sulfur (NOx and SOx). Next the purified gas is passed through an absorption column filled with the chemical scrubbing solvent. The solvent reacts with the carbon dioxide and selectively absorbs it from the gas stream. When CO2-rich solvent is heated, the carbon dioxide is released as a nearly pure gas.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Measurement solution for Perflurocarbon (PFC) emissions from aluminium industry

    The aluminium industry is the major source of perflurocarbon (PFC) emissions to the atmosphere, which are a major contributor to global warming. PFCs have greenhouse gas effects up to 10000 times that of CO2. Emissions have been reduced over the last 20 years, but further reductions are harder to achieve as all the mechanisms for PFC production are not known. In order to better understand the production of PFC on an industrial level, laboratory studies have been carried out using a small scale cell.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Sustainable solutions for education industry

    In research and teaching, integral consideration and analysis belong to the important applied methods in various areas. Life cycle analysis and their methodic development, greenhouse gas calculations as well as new upcoming topics like water footprints are types of problems, which are not only in industry-oriented research of great significance.

    By thinkstep based in Leinfelden-Echterdingen, GERMANY.

  • Premium

    Sustainable solutions for automotive industry

    The automotive industry is one of the most prominent drivers of progress and economic growth. Its products secure worldwide mobility but also account for a significant part of greenhouse gas emissions and other environmental impacts.

    By thinkstep based in Leinfelden-Echterdingen, GERMANY.

  • Premium

    Sustainable solutions for transportation & logistics industry

    The amount of material flow is increasing rapidly worldwide and therefore, the volume of traffic as well. Currently, the traffic is one of the factors which cause the most greenhouse gas emissions. In Europe, it is the only sector whose greenhouse gas emissions are significantly increasing instead of decreasing. The big challenge of the industry is to handle the increasing amount of material flow and to reduce the greenhouse gas emissions and consumption of resources at the same time.  Additionally, there exist other challenges on local scale, such as pollution burden, which can be enforced through a growing urbanisation.

    By thinkstep based in Leinfelden-Echterdingen, GERMANY.

  • Premium

    Flow Measurement instrumentation for superior natural gas measurement & control

    Precise measurement of natural gas requires high accuracy, low pressure drop and direct mass flow reading—all the hallmarks of Sierra’s immersible thermal, mass vortex and thermal mass flow controllers. Our mass flow controllers are ideal for natural gas flow measurement with 100:1 turndown and no moving parts, providing a robust MFC solution. Our natural gas flow measurement instruments can also handle liquefied natural gas (LNG) via our cryogenic mass vortex meters.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Carbon footprinting calculations for environmental management

    With its expertise in calculating and managing emissions data, CERC offers a range of services to assess greenhouse gas emissions, from determining the carbon footprint of a single industrial process, to compiling a greenhouse gas inventory for a whole geographical area.

    CERC uses methods and emission factors laid out by the Intergovernmental Panel on Climate Change (IPCC). Emissions from transport, industrial, heating and agricultural activities are calculated and stored using the EMIT software package.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    Methane and Carbon Dioxide Sensing for Landfill Applications

    Application: In March 1986 an explosion destroyed a bungalow adjacent to a landfill site in Loscoe, Derbyshire. Subsequent measurements showed that 150-200 cubic meters of gas per hour were being generated by landfill waste. This event triggered a change in the way the waste industry considered and regulated gas generated at landfill sites; resulting in the landfill regulations of 2002, and in particular LFTGN03: the Guidance on the Management of landfill Gas.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Odor control solutions for solid waste industry

    Today in modern society we generate waste and and we generate it in vast quantities. Professionals around the world are dedicated to processing this material as efficiently as possible. Efficient processes and higher population density increase the risk of affecting the quality of life of workers, neighboring communities and the overall population.

    By Ecolo Odor Control Technologies based in Toronto, ONTARIO (CANADA).

  • Greenhouse gas tracking

    GHG MRR Reporting: comprehensive toolset for emission calculations against multiple protocols and for all subpart reporting requirements including electronic reporting submittals. Subpart A, C, D, W reporting: Configurable solution to handle multiple subparts. Climate Registry Reporting: Utilize existing data sets to estimate emissions from multiple reporting protocols.

    By Perillon Software Inc. based in Acton, MASSACHUSETTS (USA).

  • Data analysis and visualization tools for fisheries

    Fisheries and lake sciences challenge the abilities of traditional software tools. Virtually everything of interest lies beneath the surface. This is a 3D world with complex issues that affect the life in these water bodies and all life on Earth. C Tech’s EVS, MVS, and EnterVol software provide all the power and flexibility required to analyze and model this complex data. Our software is used around the world to assess complex issues such as global warming’s impact on lake health and species survivability. EVS/MVS are also ideal for investigating invasive species distributions, eutrophication, salinity and any other measurable parameter.

    By C Tech Development Corporation based in Henderson, NEVADA (USA).

  • Enhanced anaerobic biodegradation for the soil and groundwater industry

    Enhanced anaerobic biodegradation is the practice of adding hydrogen (an electron donor) to groundwater and/or soil to increase the number and vitality of indigenous microorganisms performing anaerobic bioremediation (reductive dechlorination) on any anaerobically degradable compound or chlorinated contaminant. The most commonly targeted chlorinated groundwater contaminants are primarily used in industry as degreasing agents and include: Perchloroethylene (PCE), Trichloroethylene (TCE), Dichloroethylene (DCE), Vinyl Chloride (VC).

    Other anaerobically degradable compounds include: carbon tetrachloride, chloroform, methylene chloride, certain pesticides/herbicides, perchlorate, nitrate, nitroaromatic explosives (TNT, RDX), dyes and chlorofluorocarbons (CFC’s).

    By REGENESIS based in San Clemente, CALIFORNIA (USA).

  • Environmental monitoring solution for cement industry

    Measurement of particulates, SO2, NOx, hydrocarbons and greenhouse gas emissions from the cement manufacturing industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental Compliance and Management Services

    CSRware professionals can assist you with getting started on how to identify your GHG reduction goals, how to identify energy, water, waste, chemical and other natural resource data to apply metrics for performance management. We can work with your team to develop survey's, scorecards or other mechanisms to gather the data required to help identify where your organization is at risk of not being in compliance. Our team will determine how to implement software to automate the process for you in order to make environmental compliance and risk management a repeatable process. You can then track, measure and take action on improving operations or reporting to internal and external business partners.

    By CSRware, Inc. based in San Francisco, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you