Only show results in Massachusetts? Ok

Dioxins and Furans Applications

  • Premium

    Hazardous waste treatment solutions for site remediation

    The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Air pollution control solution for cement industry

    The fundamental ingredient in concrete is portland cement. The cement manufacturing process requires a great deal of energy to heat the mixture of raw materials in a cement kiln. The main source of toxic emissions from a portland cement plant is the kiln. The treatment of kiln exhaust is similar to most incinerators processes. Scrubbers are the best choices for control of acid gases, fine particulate, heavy metals as well as dioxin and furans. The MACT II regulations, yet to be finalized, for cement kilns are...

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Environmental solutions for the waste incineration industry

    Multi-pollutant abatement systems. Different Categories of Waste Incineration: From a regulatory standpoint, the industry is divided into a number of categories: commercial/industrial solid waste incinerators (CISWI), municipal waste combustors (MWC), hospital/medical/infectious waste incinerators (HMIWI), hazardous waste combustors (HWC), sewage sludge incinerators (SSI), and other solid waste incinerators (OSWI). While each sub-category is subject to differing environmental regulations, all can benefit from...

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).

  • Premium

    Air pollution, emission and process monitoring systems for power generation

    ENVEA’s involvement with the Power generation industry over many years has led to the development of a unique range of process optimization solutions, as well as approved (TÜV and MCERTS) technologies for in-stack measurement of gas, particulate and flow concentration. They allow to optimize the whole-plant’s efficiency through measurement & control, facilitate legislative compliance, support ISO 14000 objectives and save operational costs by reducing plant’s maintenance requirements...

    By ENVEA based in Poissy, FRANCE.

  • Premium

    Hydrocarbons and carbon monoxide

    Example: Aluminium recycling. Similar tasks: Recycling of copper, lead, cink.

  • Premium

    Dioxins and furans

    Example: Scrap copper recycling, cobalt for battery production. Similar tasks: Metal recycling, roast processes, thermal waste disposal.

  • Premium

    Environmental solutions for the iron and steel industry

    Precise and reliable evaporative gas cooling systems and air pollution control solutions for the iron and steel industry. Evaporative Gas Cooling and Conditioning: The evaporative gas cooling and conditioning system uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By...

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).

  • Premium

    Environmental solutions for the pulp and paper industry

    Dürr Megtec provides environmental compliance solutions to pulp and paper mills to meet regulatory requirements.

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).

  • Premium

    Chlorinated hydrocarbons

    Example: Pharmaceutical industry. Similar tasks: Chemical industry.

  • Air Pollution Control Solution for the FGD - SO2

    Flue Gas Desulfurization (FGD) involves the removal of sulfur dioxide and other acids from flue gases. Typical sources of acid gases include fossil fuel boilers, waste combustors, and other industrial applications such as refining and smelting. The Macrotek wet and dry FGD systems can achieve over 99% acid removal by using a variety of reagents, including caustic, sodium carbonate, lime and limestone, and waste alkaline solids or liquids.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Thermal Remediation Inside & Near Buildings & Infrastructure

    In Situ Thermal Remediation (ISTR) Beneath and Around Existing Buildings and Infrastructure; In Situ Thermal Remediation (ISTR) technologies, including In Situ Thermal Desorption (ISTD), the Electro-Thermal Dynamic Stripping Process (ET-DSP™), which is an advanced form of electrical resistance heating, and Steam Enhanced Extraction (SEE) have been demonstrated effective in treating source zones with limited access and those adjacent to or beneath buildings and other infrastructure.

    By TerraTherm - a Cascade Company based in Gardner, MASSACHUSETTS (USA).

  • Waste management for ships and sea platforms

    For those who have lived in the arms of the sea, the bond is powerful and eternal. When mariners discharge waste into the sea, it is not carelessness but desperation…a last resort used in the absence of practical alternatives. The waste generated on every ship comes from both people and machinery. People generate garbage and sewage. The various motors and shafts generate used oils, dirty rags and a wide variety of other waste. The mariner has three options for all this waste: (i) store it on board and...

    By Terragon Environmental Technologies Inc. based in Montréal, QUEBEC (CANADA).

  • Waste recovery for energy & utilities

    In order to stay competitive and to be seen as being environmentally responsible, energy and utility companies are always looking for alternative routes to generate power. One method of doing this is by leveraging waste to energy incineration plants linked to the processing municipal solid waste. During this incineration process, APC residues, which are a mixture of fly ash, organic pollutants (including dioxins and furans), are generated and are classified as hazardous waste and have a detrimental environmental...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Stack Testing for the Aluminum Industry

    ALUMINUM INDUSTRY: Performed a range of test measurements required by the promulgation of the Secondary Aluminum MACT standards. Testing included measurements of Hazardous Air Pollutants for establishing Area vs. Major Source Determinations, as well as dioxin/furan compounds associated with chlorine emissions from fluxing operations.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Waste recovery for organic wastes e.g. PCBs & Dioxins

    Tetronics` technology destroys organic wastes including Polychlorinated Biphenyls (PCBs) and other types of Persistent, Bio‐accumulative, and Toxic (PBT) pollutants at very high efficiencies across a wide range of concentrations.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • MPP water purification systems for industrial waste and process water application

    Removal of total spectrum of non-polar and polar hydrocarbons proven in practice: MPPE removes toxic, non-polar, non biodegradable compounds, aromatics, poly aromatics, halogenated, chlorinated, PCBs, THT (TetraHydroTiophene), Dioxins, CS2 etc. Folowed by biotreatment removing polar biodegradable compounds. Optional: UF and/or activated carbon filtration and RO for reuse as process or boiler feed water.

  • Persistent Organic Pollutants (POPs)

    Employing our patented MCD technology to destroy toxic contaminants in soil, with a focus on the Stockholm Convention on Persistent Organic Pollutants.

    By Environmental Decontamination Limited (EDL) based in East Tamaki, NEW ZEALAND.

  • Gas phase reduction technology solutions for medical waste conversion sector

    The Natural Energy Solution uses a proprietary, patented process called Gas Phase Reduction (”GPR”). This is a highly effective, non-incineration method that converts all organic waste and destroys all hazardous organic waste products.

    By Natural Energy Systems Inc. (NES) based in Burlington, ONTARIO (CANADA).

  • 2-ETHYL FURAN

    BOC Sciences is committed to supplying cost-effective products and services. We provide 2-ETHYL FURAN. More information please visit: https://www.bocsci.com/2-ethyl-furan-cas-3208-16-0-item-65985.html

    By BOC Sciences based in NEW YORK (USA).

  • Gas phase reduction technology solutions for hazardous waste destruction sector

    The Natural Energy Solution uses a proprietary, patented process called Gas Phase Reduction (”GPR”). This is a highly effective, non-incineration method that destroys all hazardous organic waste.

    By Natural Energy Systems Inc. (NES) based in Burlington, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you