Only show results in Massachusetts? Ok

Hazardous Gas Monitoring Applications

  • Premium

    Gas analyzers and monitoring systems for container monitoring sector

    In addition to miscellaneous products, shipping containers might contain toxic gases that present health hazards for workers opening or unloading them. Gasmet manufactures portable and powerful gas analyzers for measuring these hazardous gases inside enclosed spaces. With our solutions, you can measure vast variety of gases simultaneously in cost-effectively.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Gas monitoring instruments and systems for HAZMAT

    Accidents involving chemicals and other hazardous materials require fast and accurate gas measurements as part of the first response. The Gasmet™ DX4040 portable FTIR Gas Analyzer provides reliable identification and concentration measurements of hazardous gases in 60 seconds or less.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Gas analyzers and monitoring systems for First response

    The first response encounters hazardous gases that need to be identified quickly. Gasmet manufactures portable and powerful gas analyzers for these crucial measurements. Measure a vast variety of gases simultaneously, on-site. Read about our solutions for First Response!

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Portable and fixed gas analysers for landfill perimeter monitoring

    Controlling potentially explosive and asphyxiate gases from escaping off site is important for meeting Health and Safety standards and protecting the local environment.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Refineries and hazardous areas gas analyzers for industrial air monitoring

    Chromatotec can propose for hazardous areas (for instance refineries) specific boxes for our analysers : category 1 IIc T4 for example.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Open path ambient air quality monitoring

    Proven Solutions for Fence-line and Perimeter Ambient Air Monitoring Offering 40 CFR 63.658, BAAQMD Rule 12-15 and SCAQMD Rule 1180 Compliance.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Ultraviolet disinfection systems for the pipeline hydrotesting & flooding water

    Before natural gas or oil is transported through new pipelines, the entire length of the pipeline assembly is pressure tested using either fresh water or seawater, and is the final construction ‘quality assurance’ test before the pipeline is put into operation. The pressure test is held for a specific amount of time, from between 1 day and 100 days, to ensure structural integrity before the pipeline is placed into operation.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Turnarounds for Leak Detection

    Second Sight TC provides temporary continuous monitoring during turnarounds, allowing cameras to be moved to focus on specific sites.

    By Bertin Instruments based in Montigny-le-Bretonneux, FRANCE.

  • Premium

    Gas leak detector for First responders

    Second Sight MS is deployed in the event of an accident to detect a gas leak at a long distance and prevent first responders from going into the field without knowing what they are facing.

    By Bertin Instruments based in Montigny-le-Bretonneux, FRANCE.

  • Premium

    Gas detector solutions for oil & gas industry

    The Oil and Gas industry pose many potential risks to workforce, workplace and the environment. Hazardous gas emissions are prevalent during production and processing operations with exposure to benzene being a significant concern.

    By Ion Science Ltd. based in Royston, UNITED KINGDOM.

  • Premium

    Gas analysis solutions for glove boxes sector

    Glove boxes are commonly transparent, sealed containers that have gloves built into the side. They allow users to create the appropriate atmosphere in which to manipulate objects or hazardous materials. Industries such as pharmaceutical, research, metal treatment and manufacturing employ gloveboxes to carry out processes such as welding or the handling of biological substances or chemicals. Gases such as nitrogen, argon or helium are used to blanket the atmosphere within the glovebox, which prevents reactions...

    By Cambridge Sensotec Limited based in St. Ives, UNITED KINGDOM.

  • Gas Detectors for Oil and Gas

    The oil and gas industry is in constant need of management of hazards with the right safety systems. The most obvious threat is the leakage and combustion of explosive gas. With hazardous gases ever present during production and processing operations, operators are constantly faced with the risk of flammable and toxic gas release and exposure. A high level of plant safety is achieved through the right gas detection equipment with detectors that will demand as little maintenance as possible, tell you when it needs...

    By Optronics Technology AS based in NORWAY.

  • High-calcium lime slurry for environmental reclamation industry

    Lime slurry can be easily applied to rough terrain with a fine spray, minimizing waste and dust migration while providing a much safer, cost effective alternative. Flue gas treatment for industrial facilities and hazardous waste incinerators.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Flow meters for the process control & manufacturing flow solutions

    Most chemical reactions are based on direct mass flow readings, and thus, Sierra`s immersible thermal mass flow meters and our volumetric vortex and multivariable mass vortex flow meters see extensive used in oil, gas and steam measurement. In addition, process liquid flows can be addressed with our non-intrusive clamp-on ultrasonic flow meters. Finally, our capillary thermal mass flow meters and controllers are perfect for semiconductor processing applications.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Perimeter Monitoring and Area Monitoring

    GasFinder2 can be permanently installed to monitor chemical and petroleum plants for both combustible and toxic gases. GasFinder2 can be used to replace arrays of point sensors for perimeter monitoring. A single light path will replace many point sensors. With GasFinder2 perimeter monitoring, all gas dispersed from a facility is detected and logged.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • On-site chlorine and sodium hypochlorite generation systems for Pulp and paper bleaching industry

    Chlorine has typically been used as a bleaching agent in pulp and paper mills; however, safety concerns regarding the use of chlorine gas in the industry have recently come under focus. Klorigen™ chlorine generation systems alleviate the risk inherent with the usage of large quantities of pressurized chlorine gas in these facilities.

    By Electrolytic Technologies Systems LLC based in North Miami Beach, FLORIDA (USA).

  • Gas detection analyzers for chemical & pharmaceutical processes

    Chemical and pharmaceutical facilities use a variety of hazardous gases and solvents in their production processes. Whenever these substances are transported, processed or stored, the potential risks are high for hazardous conditions. These substances must be continuously monitored to protect personnel and facilities from accidental releases or leakage. Our various lines of hazardous gas monitoring systems benefit the chemical and pharmaceutical industry in the following applications.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Gas Detection Solutions for GHG Monitoring

    Most sources of fugitive emissions are from multiple points rather than single point sources. So, open path area or perimeter monitoring provides more meaningful fugitive emissions data than an array of point sensors or a program of grab sampling. Point measurements may underestimate emissions because of missing locations with high gas concentrations, or conversely overestimate because they are located in areas of high concentrations. Grab sampling programs typically check only a small percentage of potential...

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • AIR PURIFICATION

    Citto Activated Carbon 'Air Series' offers a range of standard, impregnated, and specialized activated carbon products for a wide spectrum of air purification applications. The dynamic product array of the Citto Activated Carbon 'Air Series' is developed to meet stringent emission control regulations as well as safety standards for emerging respiratory technologies effectively removing nuisance odors, volatile organics, and hazardous chemicals from air and gas streams.

    By Citto Corporation based in TORONTO, ONTARIO (CANADA).

  • Air sampling & monitoring systems for environment industry

    Researchers and Engineers utilize HI-Q air sampling equipment and systems for analyzing and investigating environments around the world. Data collected by HI-Q air sampling systems have provided critical information in the identification and prevention of pollution. HI-Q offers a line of high volume (TSP-Type) air sampling systems for data collection in perimeter monitoring & industrial emissions monitoring applications.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you