Only show results in Massachusetts? Ok

Hazardous Waste Applications

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks....

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for site remediation

    The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for chlorine industry

    The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Shredding machineries for waste processing

    Each system is designed to meet regulatory safety, and material handling requirements. Shred-Tech® engineers are experienced at designing turnkey solutions to each unique waste handling and processing challenge.

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Recycling equipments for electronic waste recycling (WEEE)

    The content of WEEE (electrical and electronic waste) gives recyclers various initiatives for recycling. It contains hazardous substances, such as lead, mercury or certain flame retardants, as well as precious metals like gold and silver. In 2012 approx. 64,900.000 ton electronic goods where produced and 49.000.000 ton electrical and electronic waste (WEEE) was generated. As the amount of sold electronic goods rise, the amount of WEEE rises. It is vital that this waste is taken care of properly.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Shredder solutions for the hazardous waste processing sector

    Hazardous waste processing is a challenging work, it is important the disposal of hazardous waste is both extremely safe and reliable. Shredding machine is one of most vital part in hazardous waste processing. HARDEN manufactures hazardous waste shredders for hazardous waste processing. Such as radioactive waste, steel drums containing hazardous materials or bacterially contaminated medical waste. Our single-shaft shredders are particularly suitable for shredding large volumes of hazardous waste for disposal in...

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Industrial chemical solutions for the paint industry

    Paint manufacturing facilities generate large quantities of both hazardous and non-hazardous waste. This waste includes equipment cleaning wastewater and waste solvent, filter cartridges, off-spec paint spills, leftover containers, and pigment dusts from air pollution control equipment.

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Liquid/solid separation equipment for refinery, chemical and petrochemical

    Cracking in a refinery is a process where the long organic chains in oil are broken to produce shorter chain organics that are more valuable than the oil. Fluid catalytic cracking (FCC) has generally replaced thermal cracking of petroleum hydrocarbon feed stocks. FCC produces more gasoline with a higher octane rating. FCC’s byproduct gases are more olefinic and valuable than those produced by thermal cracking.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Recycling equipments for shredding hazardous waste

    The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Sulfur Analysis for Marine Fuel (Bunker Fuel) – Meet IMO 2020 Compliance

    The shipping industry is continually experiencing regulatory changes driven by increasing environmental concerns, resulting in ever-tightening regulations restricting sulfur (S) emissions from ships' fuel. It has been announced by the UN's shipping agency that the new sulfur IMO 2020 (International Maritime Organizations) guidelines for the sulfur content of marine fuel (bunker fuel) at sea will drop from 3.5 wt% to 0.5 wt% in early 2020. The sulfur content of traditional bunker fuels used in the shipping...

    By Applied Rigaku Technologies, Inc. based in Austin, TEXAS (USA).

  • Premium

    Air pollution control solution for cement industry

    The fundamental ingredient in concrete is portland cement. The cement manufacturing process requires a great deal of energy to heat the mixture of raw materials in a cement kiln. The main source of toxic emissions from a portland cement plant is the kiln. The treatment of kiln exhaust is similar to most incinerators processes. Scrubbers are the best choices for control of acid gases, fine particulate, heavy metals as well as dioxin and furans. The MACT II regulations, yet to be finalized, for cement kilns are...

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Air pollution control solution for incineration sector

    Waste incineration, such as sewage sludge, municipal solid waste and hazardous waste incineration are areas under particular scrutiny by regulators because of their multiple toxic pollutants. The Clean Air Group, LLC has been selected by several hazardous waste facilities to design and build integrated multiple pollutant air pollution control systems to replace existing scrubber systems to meet the new Maximum Achievable Control Technology (MACT) standards. In several instances, only a scrubber was required, in...

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Processing of LCD screens

    The safe extraction of valuable raw materials: robots automatically dismantle monitors containing mercury, while protecting workers’ health at the same time. According to initial projections, around three million LCD screens will be recycled in Germany in 2016. However, their backlighting system often contains mercury, which means they are classified as 'hazardous waste' in accordance with the EWC, and as 'Collection Group 3' in accordance with the Electrical and Electronic Appliance Law. They also contain...

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Premium

    Recycling equipment for waste-to-energy recycling

    Granutech has products that are well suited to process materials with the ultimate goal of producing energy from waste.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Hazardous and Medical Waste shredder

    HARDEN designs and manufactures shredders and size reduction systems for safe disposal of hazardous, medical and pharmaceutical waste. HARDEN has extensive experience in the supply of purpose engineered reduction, fuel blending and destruction systems for the hazardous and medical waste processing industries.

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Shredders and crushers for special waste recycling

    Ever-increasing consumption across Europe, coupled with rising prosperity among the populations of the typical emerging economy are causing a sharp upturn in the volume of waste worldwide. Our shredding machines are perfectly suited for processing.

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Premium

    Liquid/solid separation equipment for remediation pollution treatment

    Landfills are categorized by regulations in three types: industrial, municipal, and hazardous. Individual landfills may be further differentiated by the types of waste which they accept. All landfills are required to be capped, usually occurring at the end of each day. The cap is typically 6-8” of soil. The cap reduces odor and loss due to wind. At the closing of the landfill, a permanent cap consisting of a membrane and more soil is added. Before the landfilling operation begins, an “impermeable”...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you