Only show results in Texas? Ok

OSHA Compliance Applications

  • Premium

    VOCs Fugitive emissions detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which...

    By EyeCGas -OGI by OPGAL based in Karmiel, ISRAEL.

  • Premium

    Gas monitoring instruments and systems for HAZMAT

    Accidents involving chemicals and other hazardous materials require fast and accurate gas measurements as part of the first response. The Gasmet™ DX4040 portable FTIR Gas Analyzer provides reliable identification and concentration measurements of hazardous gases in 60 seconds or less.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Measurement of ethylene oxide for monitoring workplace exposure limits

    The Series 8900 Ethylene Oxide Analyzer combines the selectivity of gas chromatography with the sensitivity of a Photoionization Detector (PID) providing interference free response to Ethylene Oxide (EtO) at levels below 0.05 ppm. This analytical method is referenced in OSHA`s `Occupational Exposure to Ethylene Oxide: Final Standard` 29 CFR Part 1910. The system documents exposure levels including: time-weighted averages (TWA), short-term exposure limits (STEL) and instantaneous alarms. Areas that are typically...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Ultraviolet disinfection systems for the de-chlorination industry

    The purpose of de-chlorination is the removal of free chlorine and combined chlorine compounds from potable water, as supplied by municipal water supplies. Chlorine will oxidize the surface of thin film composite polyamide membranes, causing the membrane to lose its ability to repel or reject salts. As a result, the membranes used in Reverse Osmosis (RO) or Electro-deionisation (EDI) systems will exhibit shorter lifetimes when exposed to chlorine in the water they are treating and membrane manufacturers will...

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Engineered clean air solutions for lean manufacturing applications

    Whether you call it lean manufacturing or Just-in-Time (JIT) manufacturing, eliminating waste isn’t a new concept for bottom-line minded manufacturers. But, it isn’t easy to reduce operating costs while creating more value for your customers. This is especially the case for welding, sanding, painting, or other processes that produce harmful air contaminants and create production bottlenecks for larger construction projects. What if you had a portable, clean air solution to protect your employees from...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Engineered clean air solutions for stone cutting applications

    Stone cutting is one of the messiest operations in manufacturing – and the most hazardous. When it comes to producing dust, stone cutting generates clouds of dust that is far from harmless. Most concrete, masonry, and stone contain sand that is made of quartz and creates crystalline silica when cut. The inhalation of silica particles can scar the lungs or even lead to silicosis. Of course, you don’t need OSHA and NIOSH to tell you that silica dust is dangerous. What if you had a portable clean air...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Electronic pressure measurement devices for Chemistry and Petrochemistry industry

    Chemical processes make very high demands on electronic pressure measuring instruments and hydrostatic fill level probes in two respects: processes may be complex with high dynamic pressures and fast changing temperatures the media are diverse and may be chemically aggressive, explosive, toxic, abrasive and sometimes also dirty and viscous. Add to this top safety requirements, especially in explosion hazardous plant and equipment and the absolute demand for top operational reliability.

    By BD|Sensors GmbH based in Thierstein, GERMANY.

  • Premium

    Engineered clean air solutions for transportation applications

    From alternating between initial paint sprays and repairs with finishing and coating applications, you’re too busy to worry if your shop floor air is OSHA or EPA compliant. You want to protect your employees against sanding dust and spray fumes, but facility-wide HVAC systems can suck the air out of your bottom line. What if you had a cost-effective, clean air solution that could protect your employees from airborne hazards and even speed up drying times for a more efficient work flow?

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Industrial air pollution control for the chemical and petrochemical industry

    CTP systems can be found in every leading production company: thanks to the experience and the expertise developed in partnership with our customers for processes with inconsistent waste gas volumes; varying concentrations of organic components; gases contaminated with aerosols. CTP has installed systems for waste gas streams ranging from 1,000 to 200,000 Nm³/h. CTP supplies this industry with mainly catalytic systems, regenerative thermal oxidisers (RTO) and adsorbers. As the flue gases in this industry are...

  • Premium

    Gas leak detector for First responders

    Second Sight MS is deployed in the event of an accident to detect a gas leak at a long distance and prevent first responders from going into the field without knowing what they are facing.

    By Bertin Instruments based in Montigny-le-Bretonneux, FRANCE.

  • Premium

    Visual inspection solutions for tank & vessel inspection cameras

    The visual inspection of confined spaces is a crucially important and growing segment of many industrial processes and safety procedures. Confined spaces are common in many industrial settings and range from vaults, manholes and tunnels to tanks, vessels, cisterns, and silos. Usually, the confined spaces need to be inspected periodically in order to ensure safety, cleanliness, and the absence of foreign objects, contaminants, corrosion, or residue from previous use.

    By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

  • Premium

    Activated carbons solutions for personal protection industry

    The Challenge: Manufacturers of personal protection devices are driven to safeguard the public health caused by airborne chemical contaminants. Removal of these contaminants is technically demanding, and manufacturers must meet this technical challenge while navigating stringent regulations. Jacobi’s understands this unique blend of technical and regulatory challenges for personal protection devices faced by our customers. Jacobi provides many different formats of product that are used in different aspect...

    By Jacobi Group based in Kalmar, SWEDEN.

  • Super ActivO - Ozone Generators for Residual Ozone

    This Super ActivO application note answers the question as to why the ‘slight smell of ozone’ may sometimes be present after the Super ActivO has completed its operation which includes ozone removal.

    By Ecozone Technologies Ltd. based in Kadima, ISRAEL.

  • Gas Detectors for Marine

    The marine environment is a dangerous one, from high risks at sea in stormy weather to confined spaces of the ship or hazards regarding cargo and handling. Safety systems on ships require marine environment testing and certification to ensure suitability to the extreme environments in which it must operate. Only the best systems are capable to protect workers, passengers and the environment.

    By Optronics Technology AS based in NORWAY.

  • Gas Detectors for Oil and Gas

    The oil and gas industry is in constant need of management of hazards with the right safety systems. The most obvious threat is the leakage and combustion of explosive gas. With hazardous gases ever present during production and processing operations, operators are constantly faced with the risk of flammable and toxic gas release and exposure. A high level of plant safety is achieved through the right gas detection equipment with detectors that will demand as little maintenance as possible, tell you when it needs...

    By Optronics Technology AS based in NORWAY.

  • Gas detection solutions for meat & poultry processing air monitoring sector

    Biocidal chemicals like peracetic acid are very effective at killing bacterial contamination on meat, poultry and work surfaces. But, for those people who work in processing plants where large amounts of peracetic acid is used every day there is a significant risk of over-exposure.

    By ChemDAQ, Inc. based in Pittsburgh, PENNSYLVANIA (USA).

  • For General Industry

    Considerations for sound abatement abound within certain industrial facilities. The new OSHA compliance mandates require noise control for employees and visitors to these facilities who may be exposed to continuous influences of high sound levels and reverberation properties, due to activities within these facilities. Troy Acoustics™ provides the Troy System™ materials and design solutions, which have been proven to minimize the effects of these objectionable sound levels and their effects, to...

    By Troy Acoustics Corporation based in Brunswick, GEORGIA (US) (USA).

  • Trombia Sweeper for Silica Dust Removal

    Trombia solves your silica dust challenge and makes you meet the worksite dust regulations.

    By Trombia Global based in Kuopio, FINLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you