Only show results available in Virginia? Ok

Respiratory Protection Applications

  • Premium

    Infrared Sources for Capnography

    Capnography is the monitoring of the concentration or partial pressure of carbon dioxide (CO2) in the respiratory gases. The CO2 concentration during a single breath is measured in a high temporal resolution to monitor the condition of the lungs.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Disaster and Epidemic Response

    Anywhere there is a large gathering of people, respiratory infections can be acquired due to exposure to airborne pathogenic microorganisms. To help prevent the spread of diseases the Center for Disease Control (CDC) recommends that potential problem areas be isolated and the air purified by portable, HEPA air filtration equipment. OmniAire and OmniAire PAC portable HEPA air filtration machines provide a clean air supply necessary to protect the public in gathering areas such as schools, emergency shelters or temporary healthcare facilities. To comply with CDC guidelines to prevent the spread of disease and contamination of sensitive areas, OmniAire HEPA air filtration machines are commonly used to: -Create a negative air pressure in isolation containment -Supply purified air for required air changes (ACH) -Sanitize airflow in operating and patient’s rooms -Purify air in waiting rooms and public areas -Prevent contamination in compounding pharmacies

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Gas analysis & monitoring system for dust

    Particulate matter, suspended particulate matter, atmospheric dust, particulate matter, total suspended particulate (TSP), are terms that commonly identify the group of substances suspended in the air (fibers, carbon particles, metals, silica, polluting liquid or solid). Particulate matter is the pollutant that is now considered the greatest impact in urban areas, and is composed of all those solid and liquid particles dispersed in the atmosphere, with a diameter ranging from a few nanometers to 500 microns and above (ie billionths of a meter to half a millimeter).

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Premium

    Water Treatment Solutions for Fluoride Removal

    Fluoride is a naturally occurring mineral in the soil in some areas of the country. It can leach into the drinking water supply. At low levels, it is not considered to be harmful. In fact, many water treatment plants add fluoride to the water because fluoride has been shown to help decrease tooth decay. However, higher levels can be hazardous to our health.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Medical solutions for the ventilators and respiratory

    A variety of medical devices, such as ventilators, breath analysis equipment and anesthesia delivery monitors require a quick and precise measurement of gas flow. Besides hospital applications, there is an increasing demand for gas flow control in home healthcare products, such as Continuous Positive Airway Pressure (CPAP) machines. Axetris mass flow meters and controllers are available for use with multiple gases such as O2, Air, He and CO2. The MEMS-based design of our mass flow devices offers key advantages such as quick response and high accuracy.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Ozone monitoring

    Ozone found in ambient air can have a direct affect on human health and also has the potential to create photochemical smog. It is for this reason that the U.S. EPA has set a one hour limit of 120 ppb and an 8 hour limit of 80 ppb. Ozone has been found to affect human health by harming the respiratory and immune system. People with pre-existing respiratory damage or diseases are more likely to suffer from the affects of ozone.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Carbon Monoxide (CO) monitoring

    Carbon monoxide poisoning is the most common type of fatal poisoning in many industrialized countries. Carbon monoxide is a colourless, odorless and tasteless gas caused by the incomplete combustion of hydrocarbon fuels. Carbon monoxide is a toxic gas to the human body, when inhaled it binds to hemoglobin, myoglobin, and mitochondrial cytochrome oxidase reducing oxygen storage, transport and respiration in these organelles.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Oil Mist and VOC Collection

    Oil Mist is Unbreathable. Oil based cutting fluids are often used in CNC milling, machining and metalworking. During production, these processes can produce a mist that can threaten sensitive electronic circuitry and presents serious physical risks to employees (accidents from slipping, breathing hazards).? What are the risks in a workshop with oil mist? Exposure to oil mist for a prolonged period of time can cause a number of health issues. Dermatitis Eye, nose and throat irritation Damage to the respiratory system Bronchitis Bronchial asthma Chronic cough Slip hazards (falling, dropping of tools/materials)? How can you protect yourself?? Mist collectors are effective at capturing and filtering harmful oil mist pollution. They can either be installed on individual machines or to a central location. Having the correct oil mist filtration equipment installed will protect your employees from unnecessary health risks. In addition to this, it will also help to protect your business from long term liability and healthcare costs related to workplace air contamination.?

    By DiversiTech Inc based in Montreal, QUEBEC (CANADA).

  • SDS Authoring and Generation

    The SDS Authoring and Generation module manages the creation, distribution, and storage of Safety Data Sheets (SDSs). Designed to meet increasingly stringent regulatory requirements of a number of jurisdictions both domestic and foreign, the module dramatically reduces the cost and liability associated with typical SDS management programs. . By 2015, all SDS documents and labels must comply with the Globally Harmonized System (GHS) classification standards. Features include: • Automatic flagging and documentation of first shipments, revised SDS, and no SDS within one year • Masked complexity (with access to full detail) • Protection of trade secrets by user-defined percent ranges, and the ability to hide proprietary chemical information • Cross referencing of business operating languages • Ability to update multiple SDS simultaneously SDS Authoring and Generation can be purchased as a standalone solution or as part of the Q EHS compliance software package.

    By Quantum Compliance based in Ann Arbor, MICHIGAN (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Lead Paint Removal

    No respirator required. No containment structures. Osha, epa,  rcra & sspc compliance. Combine removal, containment and final packaging into a one-step process using Pentek’s complete lead paint abatement system. The fully integrated process reduces or eliminates the need for worker respiratory protection by reliably reducing hazardous dust emissions far below regulatory requirements.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you