Only show results available in Virginia? Ok

Safety Supplies Applications

  • Premium

    AutoChem - Process Safety

    Detect Thermal Hazards Early and Design Safety Into The Chemical Process. We must ask ourselves: How much heat will be generated under normal conditions? How will a change in condition, controlled or uncontrolled, change the rate of heat generation? Can our process equipment handle removing the heated generated? Answering these questions with speed and accuracy is necessary to ensure safe and efficient design and scale-up of synthesis reactions.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Analysis of Isocyanates Using the ASSET™ EZ4-NCO Dry Sampler

    Isocyanates are used as a raw material to produce a number of products . Personal exposure can occur while the products made with isocyanates are being applied, or when the materials are removed by grinding or thermal degradation. Workers who are exposed to these compounds are at risk for respiratory disorders and asthma. The highly reactive nature of the isocyanate compounds and the low occupational exposure limits put high demands on both sampling and analytical techniques for monitoring of isocyanates in air. We investigated the performance of the LC-MS and LC-MS-MS methods in the analysis of isocyanates using the new ASSET™ EZ4-NCO Dry Sampler. We found that the analytical method can successfully reach the quantitation limit for most isocyanates of 5 ng/mL in the final sample when LC-MS-MS analysis was used and the quantitation limit of 10 ng/mL when LC-MS analysis was used. All 11 compounds were well-resolved chromatographically using a 15 cm Ascentis Express C18 column.

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Baseline® 9100 Residual Solvent Analysis — Ethanol, Isopropanol, and Acetone

    MOCON’s Baseline® Series 9100 Gas Chromatograph equipped with a photoionization detector (PID) provides a quick, cost effective quantitative analysis of IPA and acetone in air at levels in the ppb and sub-ppb range with no preconcentration necessary. Isopropanol and acetone are detected and accurately quantified to sub-ppb levels in under 3 minutes with ethanol producing no interference. The instrument is sensitive to below 5 ppb for both IPA and acetone employing the MOCON Baseline® standard PID or 0.1 ppb using the MOCON Baseline® high sensitivity PID.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Intelligent compliance solutions for flavor, food & beverage industry

    For manufacturers in the flavor, food and beverage industries, changing market dynamics dictate the need for flexibility in meeting complex regulatory and market-driven requirements. Issues range from ensuring ingredient compliance with global regulatory requirements and safety standards, labeling products in diverse markets, generating supplier suitability assessments and collecting information from various stakeholders in the supply chain. Managing these issues while delivering quality products in record time is critical, as are optimizing business processes across your enterprise and global supply chain.

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Intelligent compliance solutions for industrial, automotive & heavy equipment

    Industrial, automotive and heavy equipment manufacturers share a common set of business challenges ranging from managing a highly complex supplier network, to providing a safe work environment and meeting complex EHS regulatory obligations. Meeting these challenges while also controlling costs, mitigating risk, innovating new products and driving operational efficiencies is a difficult job. With Verisk 3E as your single trusted source for global regulatory expertise and compliance solutions you will be able to manage regulatory changes, focus on employee safety, avoid supply chain disruption and accelerate time to market.

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Intelligent compliance solutions for oil, gas and petrochemical

    Oil, gas and petrochemical companies are focused on striking a balance between improving the compatibility of their operations with the environment, while economically developing energy resources and supplying high quality products. The pressure to work with the public, government and various other stakeholders in their supply chain to use natural resources in an environmentally responsible manner while protecting the health and safety of employees and the public can be overwhelming. 3E provides a comprehensive suite of products and services that can support compliance challenges ranging from ensuring the safe and compliant production of finished products, to supporting employee safety programs.

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Long term noise measurement for safety consulting

    Where unattended monitoring for longer periods is required to obtain more detailed information of the noise climate. Equipment is protected from the weather and powered for longer periods with options to remotely download data.

    By Casella based in Kempston, UNITED KINGDOM.

  • Premium

    Safety filter for filtration solution application

    The existence of prior treatments (decantation) or low efficient filtration systems, in which the quality of the filtered water depend on the parameters as flowing speed through the filtering element, from the nature of particles, frequency on which the maintenance labours are done and backflushing efficiency does not guarantee the necessary quality levels. AZUD filtration equipments turn our installation in a system with the highest guarantees of maintenance of the required quality of water.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Premium

    Strategic market research solutions for fire industry

    Lives are saved everyday with the critical information and training provided by PennWell’s Fire Group. The PennWell Fire Group embodies over 280 years of combined experience in the fire industry through our publications, online properties, and events. Featuring an unparalleled collection of fire service media brands devoted to covering every aspect of firefighting, the PennWell Fire Group covers the latest developments and breaking news from apparatus and equipment, to firefighter training. We hold ourselves to the strictest of standards, ensuring that our service to the fire industry equals the fire industry’s tireless service to us all while maintaining our long-standing mission to “Train the fire service.”

    By PennWell Corporation based in Tulsa, OKLAHOMA (USA).

  • Premium

    Industrial Facilities

    The dust generated at various times during the production and processing of materials in factories is often unpleasant and pollutes the environment. Such situations arise, for example, in steel production, when disposing of slag, in cement production or in the lumber industry. EmiControls products have the versatility and flexibility to be adapted to a wide and diverse range of situations, enabling measures to be taken that combat these sources of dust effectively and drastically reduce their levels inside and outside the plant.

    By EmiControls based in Bolzano, ITALY.

  • Premium

    Offshore Containers & Equipments

    Hoover Ferguson believes in offering multiple solutions to their customers. With the severe and rugged requirements of the offshore industry, equipment must stand up to the most rigid requirements. Not only does Hoover Ferguson provide DNV certified frames, containers and baskets, but the Liquitote 550 gallon and 793 gallon IBC tanks have been designed with a center drain to provide easier handling and servicing. With lifting capabilities of 2.5 times the maximum gross capacity, and heavy duty lifting eyes the Liquitote® is an ideal offshore tote tank.

    By Hoover Ferguson based in Houston, TEXAS (USA).

  • Premium

    Sampling and drilling equipments for the pest control industry

    AMS, Inc. offers installation equipment for bait station and monitoring stations for the pest management technician who wants the ultimate fit and finish.

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

  • Smoke generator device for oil mist generation

    Concept’s OMG is used by many of the worlds leading specialists in Oil Mist Detection including Specs, Dr Horn , Honeywell, Kidde, Valcom, Daihatsu, Schaller and Kwangsan.

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Aerosol and particle technology for operational safety industries

    During the production, the conveyance and the filling of solid particles in the form of powders, bulk materials, granulates, pellets and many other shapes, dust is generated as a rule. This dust formation can lead to an impairment of the operational safety and the reliability of the production process, e. g. by means of inhalable dust fractions. The workplace hygiene can also be endangered, e. g. through dust accumulations.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Smoke generator devices for lev testing, spray booth clearance testing & air testing

    For many years, materials containing isocyanate have been the single biggest cause of occupational asthma in the UK. Vehicle paint sprayers are 80 times more likely to develop occupational asthma than workers in other industries. This is caused by the inhalation of the fine paint mist that is generated when paint spraying. There is a requirement for the measurement and display of `clearance times` for spray booths / rooms set by the HSE and the Motor Vehicle Repair (MVR) to meet the requirements of Control of Substances Hazardous to Health (COSHH).

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Safety Relief Valves

    Safety Relief Valves The Seetru range of safety valves for compressed air and gas are compact, highly efficient and incorporate the exclusive Tutchtite– seal technology for repeatable bubble-tight sealing performance: designed for applications including air/gas compressors, specialist gas plants, chemical equipment and piping, pressure vessels, thermal relief and medical gases etc. These valves are manufactured in bronze, brass or stainless steel and offer a wide range of connections, for applications up to 250°C. Manufactured in accordance with a wide range of international standards and approvals such as TÜV (Germany) to AD Merkblatt A2, National Board UV Stamp to ASME Section VIII Division 1, EAC customs union (Russia, Belarus and Kazakhstan), the Canadian CRN and compliant with the requirements of the Pressure Equipment Directive 97/23/EC (CE marked). LGS™ Valve Range - Our newest range is designed to be a multi-purpose device suitable for a a wide range of applications.

    By Seetru Limited based in Bristol, UNITED KINGDOM.

  • Air pollution control (APC) equipments for fire laboratories

    Fire laboratories perform different types of tests and experiments to analyze the characteristics of products and materials , when exposed to fire. Using these data , manufacturers can improve their products, fire resistance, and their longevity. Although the fire is controlled in a laboratory, many toxic substances are formed and these must be removed before the air is released into the environment. EnviBATs technology is extremely effective for this type of application. It eliminates the particles of all sizes, which also has the advantage that it eliminates the burning smell.

    By Envibat AB based in Skellefteå, SWEDEN.

  • Nitrogen Generation for Gas Blanketing

    When you need gas blanketing or tank padding for your storage tanks and containers, our team at Gas Control Systems can help. Our gas blanketing nitrogen generator offering can meet all of your needs. When it comes to gas blanketing, nitrogen is usually the best option. It can be used in a variety of situations including in tanks that are storing chemicals or hydrocarbons. The nitrogen will help reduce your oxygen content in your storage tanks or containers to a safe level.

    By Gas Control Systems, Inc (GCS) based in Sparta, MICHIGAN (USA).

  • Erosion control solutions for the sediment control

    North American Green`s Erosion Control Systems have proven solutions for your sediment control problems. Active construction job sites, forest fire rehabilitation and roadside projects all present unique sediment control challenges. That’s why project designers prefer the aesthetics and safety offered by degradable sediment control solutions - especially our SediMax Sediment Retention Systems’ fiber rolls. SediMax products can dramatically reduce surface sheet erosion with greater filtration capacity and sediment retention than straw bales or silt fences.

    By North American Green based in Poseyville, INDIANA (USA).

  • Noise and vibration monitoring for oil and gas industry

    The oil and gas industry requires major infrastructure in terms of refineries and offshore extraction platforms which operate continuously. A large number of essential rotating machines, structures and piping networks are subjected to high levels of demand in a difficult environment, leading to the potential for breakage.

    By ACOEM based in Limonest, FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you