Worker Protection Applications

7 Results found
Only show results available in Virginia?
OK
  • Category: Health & Safety ×

  • Subcategory: Worker Protection ×

Solutions for the equipment decontamination

by The BioSolve Company     based in Lexington, MASSACHUSETTS (USA)

BioSolve Pinkwater is used for cleaning/decontaminating tools and equipment at remediation sites, in refineries, on drilling rigs, following spill cleanup, and in industrial maintenance operations. Generally applied with standard pressure washing equipment.  Most oil and tar build-up can be washed away on contact. For more severe contamination, use of a hot water system may yield better results.

Gas monitoring instruments and systems for flavoring agents

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Manufacturing of powdered and liquid flavorings and fragrances involves production phases where flavoring chemicals may be released into the ambient air breathed by workers. Exposure control by gas analyzers in the production rooms and laboratories is necessary to ensure that the Time-Weighted Average (TWA) concentrations do not exceed the maximum Permissible Emission Limit (PEL) values.

Measurement of methyl bromide in ambient air for monitoring workplace exposure limits in fumigation facilities

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Methyl Bromide Monitoring System provides an automated, direct measurement of Methyl Bromide in ambient air. This instrument can meet and exceed the requirements for ambient methyl bromide monitoring. It is utilized in fumigation facilities and industrial plants to detect potential worker exposure to methyl bromide, resulting from mechanical failure, human error or product off gassing. Multipoint sampling options allow the analyzer to monitor multiple sample locations for greater coverage.

Testing Fume Hood Flow Dynamics using SF6 as a Tracer Gas

by Spectro Scientific     based in Chelmsford, MASSACHUSETTS (USA)

A safe laboratory environment requires an effective method for clearing toxic material from fume hoods. Since all handling of toxic materials is completed in these hoods, it is critical to have a procedure to evaluate their operation to assure adequate protection for laboratory workers. The InfraRan Specific Vapor Analyzer, factory calibrated for SF6, is an ideal instrument for measuring fume hood efficiency in accordance with ASHRAE and other standards. Manufacturers identify the flow dynamics (factors that affect air flow in the hood and performance with air) using the ratings AM (as manufactured), AI (as installed), and AU (as used). A fume hood evaluation conducted under its operational environment is critical, as these tests will indicate any installation shortcomings as well as direct workers in proper laboratory hood techniques.

Radiation Worker Training

by Safe Training Systems Ltd     based in Wokingham, UNITED KINGDOM

Safe Training Systems (STS) are specialists in the provision of high quality, highly realistic simulated radiation monitors. STS have sold instruments for training to over 12 different countries across the world the majority of which have been used for Nuclear Worker training. The simulation system uses completely safe methods to recreate radiation fields and contaminated surfaces, this means that novice users can be taught basic principles without any exposure. There are of course also benefits to the trainer who again does not accumulate any dose and can therefore carry out more sessions. Instruments for workers vary widely from the Thermo Electra, RO2/20 and FH40G through to Ludlum model 3s and Automess 6150AD. With a wide range of instruments and sources there is always a solution to fit both budget and purpose - please contact sales@safetrainingsystems.com for more information.

Solutions for the vapor suppression

by The BioSolve Company     based in Lexington, MASSACHUSETTS (USA)

BioSolve Pinkwater is used at major remediation and construction work-sites where excavation of contaminated soils may release noxious organic odors or hazardous VOCs. The dilute solution is sprayed directly onto newly exposed soil surfaces or stockpiles of contaminated material where volatilization is taking place. Used as an alternative to foam, Pinkwater creates a barrier that keeps vapors in the soil, allowing work to continue safely without disruption to workers or neighbors.

Tunnel Construction and Underground Mining

by EmiControls     based in Bolzano, ITALY

Dust can pose a particular hazard for people working in enclosed spaces such as in tunnel construction and deep mining. As the workers inhale, dust gets into their airways and can cause health problems. Poor visibility brings added exposure to risk. A reduction in the amount of dust generated also lengthens the service life of the machines. Therefore efficient dust control is particularly important in this industry.

Need help finding the right suppliers?

Let the XPRTs do the work for you