Dust Monitoring Articles

  • Amine Destruction - a ‘Right First Time’ Solution - Case Study

    ERG owned company Beverley Environmental are often called upon to provide complex and dynamic solutions to clients’ environmental emissions problems. ...

  • Field evaluation of a near–real time elemental monitor and identification of element sources observed at an air monitoring supersite in Korea

    Abstract Ambient measurements of elemental species concentrations were made using an online elemental monitor at an air pollution monitoring station in Gwangju, Korea to evaluate the performance of the monitor for near–real time PM2.5 elemental monitoring and identify possible sources of the observed elements. This study also demonstrates the utility of integrating hourly ...

  • Sahara Dust pollutes Southern Greece – this is how Lufft Ceilometers can help

    Information related to the range resolved aerosol-cloud physical properties appears to be mandatory for our better understanding of the atmospheric dynamics, air quality and climate change. Recently, the Southern part of Greece  suffered from a severe Saharan Dust outbreak. The dust had been driven across the Mediterranean due to strong south winds. The island of Crete was mostly affected by ...

  • Why monitor dust in the workplace?

    Almost any place of employment can present a potential threat to health and safety from airborne particulates and aerosols. It is important to note, however, that dust hazards are not necessarily visible to the human eye and that the finest particles can represent the greatest threat because of their ability to travel deepest into the lungs. Effective monitoring is therefore key to the ...


    By Ashtead Technology Ltd

  • AMETEK Land to Launch Slag Detection System at AISTech 2018

    AMETEK Land will exhibit at AISTech 2018, May 7-10 in Philadelphia, Pennsylvania, USA, Booth 2208.   With over 70 years of steel industry application expertise, AMETEK Land offers the SDS-E Slag Detection System as a proven solution for accurate ...


    By AMETEK Land

  • Technical Challenges of Continuous Mercury Emissions Monitoring

    Many pollutants such as CO2, NOx and SO2 have been monitored continuously already for decades. In the last years the awareness for the need to measure mercury has also grown, and continuous mercury monitoring is becoming more and more relevant. Especially industries burning coal, oil or waste, share the responsibility to monitor their mercury emissions. All measuring techniques need to be able to ...


    By Gasmet Technologies Oy

  • The new Lufft cloud height sensor is market-ready!

    Since 2011, the CHM 15k cloud height sensor has been part of the Lufft portfolio – initially as Jenoptik retail product. Since 2014 it has been an integral part of the Lufft range of ...

  • Silver Membranes in Monitoring Respirable Crystalline Silica

    Crystalline silica, most commonly found in the form of quartz, is a basic component of the earth; it’s found in soil, sand granite, and other minerals. During many industrial processes, crystalline silica is released as particles that are 100 times smaller than beach sand.1 Due to their size, these mineral particles cannot easily be cleared by human lungs. Instead, they persist in the ...


    By Sterlitech Corporation

  • Process & Emissions Optimization - Case study

    There are many locations that should be measured and monitored with a portable emissions analyzer to maximize product quality, combustion efficiency, safety, and emissions reduction in a cement plant including the following: Rotary Kiln gas outlet O2, CO, NOx, CO2, SO2, CxHy, temperature ...

  • NEO Monitors conquers the Quasi-impossible

    China is a world factory powered by its abundant coal resource. China is facing a huge environmental challenge brought together with the fossil-fired power plants. China has therefore been conducting technical retrofit to the engines of its economy, by introducing emission control facilities. Selective Catalytic Reduction (SCR) technology is one of the most widely applied emission control ...


    By NEO Monitors AS

  • Critical pieces in a big puzzle

    Dynea is one of the world’s leading producers of adhesives for industrial use, particularly for the wood and paper industry, but also for rock wool and glass fibre products. The company has been an important ...


    By NEO Monitors AS

  • Europe imagines the Port of the Future

    On October 11-13 Envirosuite’s General Manager for Europe, Chaim Kolominskas, travelled to Amsterdam to present to the 2017 GreenPort Congress as part of a session on the Port of the Future. The GreenPort Congress is the largest conference focussed on balancing operational efficiency and environmental sustainability at ...


    By Envirosuite Limited

  • Exceeding expectations: Safer and better – for all!

    In order to reduce emissions to a minimum and increase the employee’s safety at the facilities, Elkem cooperate with NEO Monitors.At Elkem’s plant in Salten, Norway, silicon is produced from quartz in a high temperature ...


    By NEO Monitors AS

  • 5 Habits that are bad for your indoor air quality

    School is starting, but warm weather means we are still spending more time outside and keeping windows open as much as possible. However, it doesn’t mean we are safe from poor indoor air quality at home. In fact, indoor air may be more polluted in the summer months than in the wintertime. The reasons include high humidity, pollutant buildup, pesticides and VOCs. There are certain habits in ...


    By Allerair Industries

  • Old container, new station: WS600 part of air quality measurement system in Kutaisi - Case Study

    An AQM station including a Lufft WS600 all-in-one weather sensor was installed by our local system integrator ELKO LLC in Kutaisi, Georgia in May 2017. It was mounted on an existing measurement container provided by the customer LEPL National Environmental Agency. The system consists of a Fidas® 200 fine dust monitor and immission measurement system detecting PM2.5 and PM10 particles from ...

  • Measurement of fine dust in combination with Lufft weather sensors - Case Study

    Our compact weather stations are part of monitoring stations for measurement of fine dust, manufactured by our customers Grimm Aerosol Technik GmbH and PALAS. The fine dust measurement stations have proved a success the world over. The Lufft compact weather stations WS300-UMB, WS500-UMB, WS600-UMB are used for monitoring of climate data. Thanks to the Lufft sensors the stations will not only ...

  • Europe imagines the ‘Port of the Future’

    On October 11-13 Envirosuite’s General Manager for Europe, Chaim Kolominskas, travelled to Amsterdam to present to the 2017 GreenPort Congress as part of a session on the Port of the Future. The GreenPort Congress is the largest conference focussed on balancing operational efficiency and environmental sustainability at ports. ...


    By Envirosuite Limited

  • Road air temperature sensor comparison

    Real world evaluation of the protective properties of the helical radiation shield against one of the best multi-plate radiation screens in use today for roadside weather station applications. WINTER ROAD SEASON 2015/16 (NOV. 2015 – MAY 2016) TEST The shields with temperature and humidity sensors were installed on the roadside for the duration of ...


    By BARANI DESIGN

  • Old container, new station: WS600 part of air quality measurement system in Kutaisi

    An AQM station including a Lufft WS600 all-in-one weather sensor was installed by our local system integrator ELKO LLC in Kutaisi, Georgia in May 2017. It was mounted on an existing measurement container provided by the customer LEPL National Environmental Agency. The system consists of a Fidas® 200 fine dust monitor and immission measurement system detecting PM2.5 and PM10 particles ...

  • Lifesaving weather warnings thanks to professional visibility sensors

    The new Lufft visibility sensor VS20k is now officially available. But what distinguishes it from the previous model and for which applications is it suitable? In the following article, you learn more about the new Lufft visibility sensor family… Reduced visibility – a risk for all traffic users Traffic accidents, flight cancellations and delays: Reduced visibility is ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you