Flue Gas Monitoring equipment for Monitoring and Testing

The GCEM40 series is our latest generation of in-situ gas analysers. Designed for use primarily on combustion processes the analysers measure the key pollutants such as CO, NO, NO2, NOx, SO2, CH4, HCl, CO2 and H2O.

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Safety & Performance Product line

The VCEM 5000/51000 represents the latest generation of CODEL’s uni ue flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Flow Monitors for Stack Emissions Product line

19” frame analyzer with microprocessor technology has the ZrO2 cell inside and can be used for O2 measurement in CEM II or EEMS cabinets or as a portable analyzer. Together with a sampling and conditioning system, this oxygen analyzer can measure the O2

By Gasmet Technologies Oy based in Helsinki, FINLAND. from Stationary Analyzer Systems Product line

The GCEM40 series is the latest generation of CODEL’s world renowned in-situ monitors. Our development, knowledge and practical experience have been utilised to produce this advanced technology gas analyser which gives complete flexibility of use on process or emissions applications whilst delivering superb accuracy and repeatability at a ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Stack Gas Analysers Product line

The GCEM4000 is a multi-channel flue gas analyser that uses Non-Dispersive Infrared Absorption (NDIR) technology. It provides high accuracy, low maintenance measurement of all the key combustion process emissions to atmosphere. It is capable of operating in very high dust loading conditions, up to several gm/m3 of dust. Its performance can be ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Stack Gas Analysers Product line

Pumping Molten Sulphur is most challenging. Sulphur temperatures must be controlled within a 120-155o C range. Outside this temperature sulphur solidifies. Sulphur has a distinct odour and is highly corrosive in the presence of moisture. Where leakage from common packed style pumps was unacceptable, a ROTAN magnetically driven pump unit was ...

By DESMI A/S based in Noerresundby, DENMARK. from Marine & Offshore Product line

The GCEM4100 is a hot extractive analyser for difficult flue gas monitoring applications. It uses infrared absorption spectroscopy to measure up to seven pollutant species in a single self-contained unit. Many conventional extractive systems require the sampled gas to be cleaned and dried to a very high standard prior to analysis, invariably ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Stack Gas Analysers Product line

The GCEM40E hot extractive multi-channel gas analyser is CODEL’s industry-proven continuous emissions monitor for difficult applications. Designed exclusively for use on a wide range of applications where the flue gas temperature is abnormally high, low or saturated. Three decades of development, knowledge and practical experience have been ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Stack Gas Analysers Product line

The E6000 is a NEW hand-held industrial combustion flue gas and emissions analyzer that can have up to six gas sensors. The E6000 is an innovation portable emissions monitor for accurate measurements of stack gases from combustion processes including boilers, burners, gas and diesel engines, turbines, furnaces

By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA). from Industrial Emissions Analyzers Product line

The Tekran 3342 is a customized version of an M&C Dilution Probe (Model SP2006-Hg). M&C probes are the industry standard and are well-known for their dependability and ease of servicing. The probe uses a titanium sintered filter to remove particulate matter from the sample stream. The sample is diluted and sent to the conditioner via a ...

By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Flue Gas CEM Product line

The Tekran Model 3321 Wall Mounted Sample Conditioner can be configured to supply Ionic Mercury Calibration Gas to the 3300Xi Hg CEM system. The calibration source allows both multi-point calibrations and standard additions to be automatically initiated. The unit generates concentrations of ionic mercury by oxidation elemental Hg output from the ...

By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Flue Gas CEM Product line

The MIR 9000H is a multi-gas infrared analyzer using the Gas Filters Correlation technology (GFC). With its hot measurement principle (180°C on a hot and humid sample), the MIR 9000H is the perfect tool for the analysis of the main gas parameters in many applications, including DeNOx (SCR / SNCR) and the optimization of flue gas treatment ...

By Environnement S.A based in Poissy, FRANCE. from Emission Monitoring - Multigas Stationary Monitoring Systems Product line

Differential Optical Absorption Spectroscopy or DOAS, is based on the principle of measuring the differential absorption of the incoming signal in the wavelength region of interest after it has passed through a gas medium.  It uses a broadband light source and the measurement is made over a large wavelength range (like FTIR and NDIR, and ...

By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA). from Instruments – DOAS Product line

The WDG-IV analyzer measures oxygen, combustibles and methane in natural gas-fired applications. It is ideal for gas-fired power boilers or for those using natural gas during start-up and shutdown. With this analyzer, you can monitor oxygen and combustibles for maximum fuel efficiency. Available with Series 2000 controller or integrated /IQ ...

By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from THERMOX Product line

The Need: Modern gas, oil and coal fired boiler operations require dependable, low-maintanence, application flexible devices to monitor and control combustion processes. The measurement of excess oxygen in flue gas is particularly important for obtaining maximum combustion fuel efficiency while minimizing thermal or fuel-bound Nitrogen oxides ...

By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from THERMOX Product line

The Tekran Model 1304 Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Series 3300Xi Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and for the generation of calibration gas. ...

By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Flue Gas CEM Product line

The WDG 1200 Insitu and the WDG 1210 Insitu are rugged, reliable flue gas analyzers for net oxygen that use industry-proven zirconium oxide sensor technology. The outer probe tube is 310 stainless steel so no abrasion shield is needed for most applications. The controller features precision temperature control for optimum stability, built-in ...

By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from THERMOX Product line

The accurate emissions monitoring of soluble gases, present in flue gas from industrial and commercial processes, requires a sampling system designed to prevent significant loses of the SO2 and/or NO2 gases in the sampling lines prior to entering the analyzer or measuring device.

By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA).

The EPA Electric Generating Unit Mercury and Air Toxics (EGU MATS) and Portland Cement Maximum Achievable Control Technology (PC MACT) regulations require reductions in gaseous mercury emissions. Tekran has proven technology to support mercury compliance monitoring, abatement system optimization, and performance audit testing instrumentation.

By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Flue Gas CEM Product line

The Tekran 3342 is a customized version of an M&C Dilution Probe (Model SP2006-Hg). M&C probes are the industry standard and are well-known for their dependability and ease of servicing. The probe uses a titanium sintered filter to remove particulate matter from the sample stream. The sample is diluted and sent to the conditioner via a ...

By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Flue Gas CEM Product line