Only show results available in Virginia? Ok

Flue Gas Monitoring services for Monitoring and Testing

  • Computational Fluid Dynamic Analysis Services

    In the design of a NOx-reduction system CFD is used as a tool, when appropriate. Various geometries, relevant in the energy recovery industry and in the cement industry are shown below. Commonly taken perspectives are modelling of flue gas pattern or temeprature distribution.

    By AB Combustion & Iridescence based in Askersund, SWEDEN.

  • Flue Gas Cleaning Services

    People's lives and healt are directly influenced by the air that is available for them to breathe. If we do not control the gaseous emissions for industrial and municipal sources in a short time, our planet will be covered with a very dangerous grey cloud.The  utilization of air pollution control systems such  as  desulphurization, ...

    By IDRECO S.p.A based in Voghera, ITALY.

  • Analysis Services

    CSL carries out analysis of samples for various application like Stack gas, Flue gas, BIO gas LPG – Natural gas, Process gas impurities analysis, Beverage gas analysis. The samples can be sent by customer at CSL premises in sampling bottles and bladders.

    By Chemtron Science Lab. Pvt. Ltd. based in Mumbai, INDIA.

  • Energy & Environment Service

    Large dimensions, sensitive problems or demanding processes and technologies: such challenges encourage atea to demonstrate their best qualities.

    By atea Anlagentechnik GmbH based in Ransbach-Baumbach, GERMANY.

  • Emission Sampling Trains Services

    Emission sampling trains are grab sample equipment, essentially consisting of a probe, a series of impingers, a gas meter, and a pump. Presently, more than thirty variations of sampling trains are used on different pollutants and/or applications. These variations may simply be using different absorbing chemicals or number of impingers, but may ...

    By Entech Engineering Inc. based in Houston, TEXAS (USA).

  • Flue Gas Elimination Materials

    The emission limits of nitrogen oxides (NOx) especially for cement plants that use substitute fuels are continuously reduced. At the same time, numerous waste waters and liquid wastes are contaminated with high amounts of nitrogen compounds.These could only be treated with considerable effort as waster water and overwhelm many industrial and ...

    By BAUFELD-OEL GmbH - Industrieservice based in Munich, GERMANY.

  • Environmental Compliance

    Power Plant Environmental Compliance and Efficiency Improvement for Gas, Coal, Nuclear, Steam & Thermal. With the global focus on emissions, Fluor is helping clients quickly achieve environmental compliance in the most cost-effective manner. From conceptual studies to full EPC turnkey projects for major plant upgrades, retrofits and ...

    By Fluor Corporation based in Irving, TEXAS (USA).

  • Climate & Environment

    Indaver invests in advanced technologies to limit the impact of its activities to a minimum. In all areas of air, soil and water.

    By Indaver N.V. based in KALLO, BELGIUM.

  • Ecomb Combustion Consulting Services

    We conduct accurate furnace temperature measurements of flue gases by using a water-cooled suction pyrometer otherwise known as an HVT Probe. The probe in short consists of shielded thermocouple for radiant heat from the combustion process, flue gases are withdrawn past the thermocouple by using a suction pump or an air aspirator. The suction ...

    By Ecomb AB based in Södertälje, SWEDEN.

  • Hydrogen Sulphide Monitoring Services

    Hydrogen sulfide (or hydrogen sulphide) is the chemical compound with the formula H2S. This colorless, toxic and flammable gas is responsible for the foul odour of rotten eggs and flatulence. It often results from the bacterial break down of organic matter in the absence of oxygen, such as in swamps and sewers (anaerobic digestion). It also occurs ...

    By Odour Monitoring Ireland based in Trim, IRELAND. from Air Quality Services Service line

  • Flow Modeling Services

    STEAG SCR-Tech performs computational flow modeling for a wide variety of applications, including SCRs, large particle ash screens and FGDs. This service takes into account a number of factors, including: Flue gas flow, temperature distribution, ammonia and flue gas mixing, fly ash distribution, minimizing pressure drop. Flow modeling is ...

    By STEAG SCR-Tech, Inc. based in Kings Mountain, NORTH CAROLINA (USA). from Others Service line

  • Process Optimization Services

    The first step of professional project planning is a preliminary process analyses. It allows for an optimal plant design as well as documentable and reliable warranty values. We offer a mobile flue gas temperature pre-measurement, in order to design the SNCR System specific for each application.

    By M.A.L. Environmental Technology based in Vienna, AUSTRIA. from Engineering Service line

  • Boiler Service

    A safe and efficient boiler is a key element of your home, providing hot water and heating for everyone. Problems with boilers can be expensive, time-consuming and worrying, particularly with the risk of carbon monoxide from faulty boilers. A boiler service and safety check can help avoid this – which is why we’ve got together with ...

    By EDF Energy based in Exeter, UNITED KINGDOM.

  • Auditing of Boilers

    Performance evolution of Boilers. Feed air & Flue gas analysis. Optimization of excess combustion. Improved instrumentation for control. Improvement in operating practices. Incorporate heat recovery. Reduction of heat losses.

    By Eco Energies based in Sirsa, INDIA. from Major Plant Installations Audit Service line

  • Disposal and utilization systems

    Our scope of services in the fields of landfill gas exhaustion and disposal systems: Stationary gas exhaustion plants as well as hire units and testing plants for hazard control, exhaust tests, remediation tasks and landfill degasification. High-temperature flares with combustion temperatures of up to 1.2OO°C and flue gas retention times of at ...

    By Roediger BioEnergie GmbH based in Hanau, GERMANY.

  • ESP Performance Testing Services

    An electrostatic precipitator induces an electrostatic charge to remove particles from the flue gas. In concert with a baghouse (using a woven or felt fabric), an ESP is an effective filtration device, removing fine and coarse particulates. STEAG SCR-Tech tests electrostatic precipitator (ESP) performance and optimizes Flue Gas Conditioning (FGC) ...

    By STEAG SCR-Tech, Inc. based in Kings Mountain, NORTH CAROLINA (USA). from Particulate Emission Control Service line

  • Processing Municipal Solid Waste into Energy Service

    Most landfills operate as they have over the last 50 years where trucks arrive to the landfill, are weighed, and then the waste is dumped into the open landfill. The waste is compacted and covered with dirt or other type of fill material. The result is valuable fuel buried forever and methane gas (a major source of green house gases) spewing into ...

    By The Hoskinson Group, LLC based in Jacksonville, FLORIDA (USA).

  • Flue Gas Analysis Services

    Cronin Environmental offer the service of flue gas analysis using the Land combustion flue gas analyser. This instrument is a complete mobile unit. Measurements include: Temperature: CO2, O2: NOX, CO: SOX.

    By Cronin Environmental based in Cork, IRELAND.

  • Sewage (Biosolids) Treatment Plants

    Sewage (or biosolids as we prefer to call it) treatment plants are certainly one of the more odoriferous sources, and one which we have plenty of experience with. Our first introduction to the incineration process was with the multiple hearths which then spread into fluidized bed incineration. As a side note we have performed extensive emissions ...

    By Gammie Air Monitoring LLC based in West Simsbury, CONNECTICUT (USA). from Industry Services Service line

  • Sample Handling and Analysis System Services

    The sample handling and conditioning system used by Entech Engineering can extract from one to 24 samples, individually or in composite, from the flue or vent gas ducts. One to four positive displacement pumps is used to draw samples from the gas duct to the trailer continuously. Depending on the applications, probes may vary from stainless steel ...

    By Entech Engineering Inc. based in Houston, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you