Only show results available in Virginia? Ok

Gas Calibration equipment for Monitoring and Testing

  • Premium

    Sonimix - Model Sx 6000 C1 - Multipoint APM Multigas Calibrator

    Due to its permeation tubes this instrument is appreciated in the area where the supplying in gas cylinder is difficult or complicated. The Multipoint Multigas Calibrator Sx 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, ...

    By LNI Swissgas SA based in Versoix, SWITZERLAND. from Multipoint APM Multigas Calibrator Product line

  • Premium

    Sonimix - Model Sx 2106 - Binary Gas Calibration System

    The binary Predivider Sonimix 2106 is based on the principle of gas stream through sonic nozzles and is built according to the ISO 6145/6 normalization. Most accurate device on the market (0.5% rel.). The Sonimix 2106 PreDil is mainly used to increase the dilution range of the Sonimix 2106 or 7000 gas dividers.

    By LNI Swissgas SA based in Versoix, SWITZERLAND. from Binary Gas Calibration System Product line

  • Premium

    TAPI - Model T750 - Portable Gas Calibrator

    The Model T750 is a portable, microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations. The T750 is housed in a high-density, molded travel case which includes an integral ...

    By Teledyne API based in San Diego, CALIFORNIA (USA). from Portable Gas Calibrator Product line

  • Premium

    LNI - Permeation Tubes

    Permeation tubes are small containers filled with a pure chemical compound in a two-phase equilibrium between its gas phase and liquid phase.

    By LNI Swissgas SA based in Versoix, SWITZERLAND. from Permeation Tubes Product line

  • Premium

    TAPI - Model T750U - Trace Level Portable Gas Calibrator

    The Model T750U is a portable, microprocessor based calibrator for precision trace-level gas analyzers.  Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations.  The T750U is housed in a high-density, molded travel case ...

    By Teledyne API based in San Diego, CALIFORNIA (USA). from Trace Level Portable Gas Calibrator Product line

  • Premium

    Cerex - Model 15cm - Calibration Cell

    The 15cm calibration cell features 2″ windows for small beam path operation. Windows are selectable for UV or IR transmission.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA). from Calibration Cell Product line

  • Model ML - Permeation Tubes

    Type “ML” certified with accuracy of 5% available with special certification ±2% Range of permeation rate ±25% Dimensions in mm : diameter 15,8; length 54,0.

    By Fine Metrology S.r.l. based in Spadafora (ME), ITALY. from Permeation Tubes Product line

  • Wafer Permeation Tubes

    Type “WAFER” certified with accuracy of 5% available with special certification ±2% Range of permeation rate ±25% Dimensions in mm : diameter 16,4; length 46,5.

    By Fine Metrology S.r.l. based in Spadafora (ME), ITALY. from Wafer Permeation Tubes Product line

  • Dynacal Permeation Tubes

    Permeation tubes are small, inert capsules containing a pure chemical compound in a two phase equilibrium between its gas phase and its liquid or solid phase. At a constant temperature, the device emits the compound through its permeable portion at a constant rate. Ideal for lab environments. Smaller than G-Cal devices. More precise than G-Cal ...

    By VICI Metronics, Inc. based in Poulsbo, WASHINGTON (USA). from Dynacal Permeation Tubes Product line

  • Specgas - Disposable Calibration Gases

    SpecGas Inc., has the expertise and experience to provide stable low PPM & PPB concentration calibration mixtures of reactive, toxic, hydrocarbon, and atmospheric gases in various size disposable cylinders. Disposable gas cylinders are great delivery and storage solutions for smaller orders, clients that require shipping of our gas mixtures ...

    By Specgas Inc. based in Warminster, PENNSYLVANIA (USA).

  • HORIBA - Model APMC-370 - Air Pollution Multigas Calibrator

    Dilution of gases with high accuracy and precision requires high quality mfc’s, especially for high dilution ratios and ranges. Consequently HORIBA’s APMC-370 is equipped with digital mfc’s. These mfc’s are factory calibrated, optional also with a special Polynomial Calibration. HORIBA Europe‘s APMC-370 is designed to ...

    By HORIBA Europe GmbH based in Leichlingen, GERMANY. from Air Pollution Multigas Calibrator Product line

  • Model EL - Permeation Tubes

    Type “EL” certified with accuracy of 5% available with special certification ±2% Range of permeation rate ±25% Dimensions in mm : diameter max 9; length max 84 + length of permeable tube proportional to desired permeation rate.

    By Fine Metrology S.r.l. based in Spadafora (ME), ITALY. from Permeation Tubes Product line

  • Kin-Tek - Model LFH Series - Liquid-Filled Permeation Tubes

    KIN-TEK Trace Source refillable permeation tubes [Brochure]:Have a broader concentration range than the Trace Source disposable permeation tubes.Are recommended for long-term use and special applications requiring a wide range of calibration points.Are available for chemicals that are not typically suitable for disposable permeation tubes such as ...

    By KIN-TEK Laboratories, Inc. (KIN-TEK) based in La Marque, TEXAS (USA).

  • Gas Blender

    In order to accurately calibrate Protea's range of gas analyser products, it is important to have repeatable gas calibration system. Protea’s gas blender products can achieve large calibration ranges to be covered from higher concentration gas reference standards. Using the latest in Mass Flow Controller (MFC) technology, the units are ...

    By Protea Limited based in Middlewich, UNITED KINGDOM. from Gas Blender Product line

  • Easy Span - Permeation Tubes

    Type “EASY SPAN” certified with accuracy of 5% “easy span” may be used at ambient temperature, permeation rate is low and linear temperature dependent. Each tube is supplied with a Swagelok® connection (¼ inch) and calibration certificate with a graph which shows permeation rate vs. temperature from 16 to 25 ...

    By Fine Metrology S.r.l. based in Spadafora (ME), ITALY. from Permeation Tubes Product line

  • Environics - Model Series 6100 - Computerized Multi-Gas Calibration System

    The Environics Series 6100 Computerized Multi-Gas Calibration System is a computer controlled, state-of-the-art instrument for dynamic multi-point gas calibration of ambient air analyzers. The Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases of interest. ...

    By Environics, Inc. based in Tolland, CONNECTICUT (USA). from Computerized Multi-Gas Calibration System Product line

  • Model AE102 - Portable Gas Calibrator

    The model AE100 and the AE102 are simple one step operation portable gas calibrators that are a continuous source of gas at a specific concentration and flow rate. The AE100 offers single concentration calibrations while the AE102 offers dual concentrations. Small and light weight, the model AE100 and the AE102 are self contained in a rugged case ...

    By Airwave Electronics Ltd. based in Didsbury, ALBERTA (CANADA). from Portable Gas Calibrator Product line

  • Protea - Gas Blender

    In order to accurately calibrate Protea's range of gas analyser products, it is important to have repeatable gas calibration system. Protea’s gas blender products can achieve large calibration ranges to be covered from higher concentration gas reference standards. Using the latest in Mass Flow Controller (MFC) technology, the units are ...

    By Protea Limited based in Middlewich, UNITED KINGDOM. from Gas Blender Product line

  • VTI - Model 2015SPI-1 - OEM Digital ND IR CO2 Sensor

    The VALTRONICS Model 2015SPI-1 is an OEM NDIR COz sensor with digital signal processing and temperature compensation. The firmware VERSION depends upon the specific customer interface requirements. The SPI (Serial Peripheral Interface) is described on pages 2 and 3. Each serial numbered sensor is individually gas calibrated and temperature ...

    By VTI-Valtronics, Inc. based in Valley Springs, CALIFORNIA (USA). from OEM Digital ND IR CO2 Sensor Product line

  • Gas Rover - Catalytic Combustion Sensor

    The Gas-Rover uses a catalytic combustion sensor  to provide sensitivity, speed of response, and accuracy needed for leak surveys on foot or by vehicle. The Rover can be used to replace a conventional FID with a significant reduction in cost and a substantial increase in convenience.

    By Bascom-Turner Instruments, Inc. based in Norwood, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you