Gas Detection Articles

  • Hydrogen Sulfide Analyzers – Finding the Right Fit for Your Needs

    Monitoring hydrogen sulfide (H2S) levels is critical for air quality, safety and environmental professionals across a multitude of industries. Doing so helps prevent complaints, citations, penalties, corrosion, fires, illness, and even death. ...


    By Arizona Instrument LLC

  • Release of hydrogen sulfide in a sewer system under intermittent flow conditions: the Eiceira case study, in Portugal

    The presence and fate of hydrogen sulfide in wastewater systems were studied in two stretches of an intercepting sewer system located in a coastal village, in Portugal. A range of hydraulic parameters were obtained and liquid and gas phase measurements were carried out, both continuously and through intensive sampling campaigns. Upstream, where flow rates were relatively low, dissolved sulfide ...


    By IWA Publishing

  • Case Study - Siemens Industrial Turbomachinery AB

    Problem Two large gas turbines (approximately 25m x 12m x 10m) were installed in an industrial area nearby an office building. The gas turbines generate a tonal noise component at around 2700Hz caused by the inlet channel blades pass frequency. This tone imposes a more stringent noise requirement on the supplier, forcing noise reducing actions being made on the turbine. ...


    By Norsonic AS

  • Case study: AMAPETCO onshore gas power generation

    ProServe with its principles Dresser Rand has supplied, installed, commissioned and start up on Nov 2015 a very unique 2 X 780 kW gas gen sets using the flare gas at AMAPETCO company field in Ras Eldeb bay “100 Km south of Hurghada city on the red sea. These two gen sets are the first environmental friendly ones in Egypt using a catalytic convertor to reduce the NOx to less than 100 ppm. ...


    By ProServe Egypt

  • Neon Gas and Where it is Used - PureAire Oxygen Deficiency Monitors for Safety and Why a Monitor May be Required?

    Neon gas has a range of uses in industry, including in the popular business signs advertising stores as open. Explore some of the less well-known ways to use neon and learn how use of the gas may require installation of an oxygen deficiency monitor to protect worker safety.   Uses for Neon Gas Neon gas can be filtered from helium using ...

  • Leak Detector Lithium Ion Battery

    Lithium ion batteries have been in the news quite a lot recently, and not all of it has been positive. There have been numerous incidents of different products from airplanes to hoverboards to mobile phones catching fire during charging or operation.  These problems occur when there has been damage to the cells’ structure or to the protective circuit.  The protective circuit ...


    By Restek Corporation

  • How can you measure Peracetic Acid separately from Hydrogen peroxide, Isn’t there hydrogen peroxide in PAA?

    We receive questions of this sort frequently and the questioner is partly right. Peracetic acid (PAA) is formed in an equilibrium mixture with hydrogen peroxide and acetic acid, so in a mixture of PAA, hydrogen peroxide and acetic acid, PAA is being continually formed by the reaction of hydrogen peroxide and acetic acid, and peracetic acid is continually breaking down to reform hydrogen peroxide ...


    By ChemDAQ, Inc.

  • Measuring oxygen levels in offshore extracted natural gas - Case Study

    Teekay use the EC92DIS portable oxygen analyser on board the Voyageur to measure the oxygen levels in the gas. In March 2013, one of Teekay's largest projects, the Voyageur Spirit FPSO achieved the first oil extraction on the Huntington field in the United Kingdom. The production unit was installed for its new charter contract with E.ON Ruhrgas UK E&P (E.ON) and is expected to last for ...


    By Systech Instruments Ltd

  • What are the root causes of wear in industrial machinery?

    Over the years we’ve published a wide range of material designed to help you protect your assets and prevent machine failure, through implementing the right maintenance programme and taking appropriate action to fix issues before they manifest into larger and often more complex problems. However, ...


    By Hansford Sensors

  • Use of Oxygen Monitors for Nitrogen, Argon, or Cryogenics and Where They Are installed

    An oxygen deficiency monitor or O2 monitor is found in many settings where colorless, odorless gases -- including nitrogen, argon, CO2, and cryogenic gases -- are used. Always monitoring, the oxygen detector can tell when gas levels rise above those deemed safe, and let off a timely alarm. Learn which settings commonly use ...

  • Case study - Polycyclic aromatic hydrocarbons (PAHs) in semipermeable membrane devices (SPMDs) exposed to air and aquatic plants in Thailand

    Project reference Project: Pilot project in the Bangkok region of Thailand Project period 2000 Nature of task: investigation of the air pollution and the connection between ambient air and aquatic plant concentrations of PAHs in the Bangkok region of Thailand contribution of ...


    By Exposmeter AB

  • PeCOD – Petrochemical Industry - Case Study

    Optimizing process efficiency for petrochemical wastewater monitoring is a key step in achieving sustainable energy. Care must be taken to properly monitor and treat wastewater generated from petroleum refineries to ensure contaminants are not released into the surrounding environment. Fast, safe, and reliable detection technology is therefore highly sought after and enables plant operators to ...


    By MANTECH

  • PureAire Oxygen Analyzer for 3D Printers: How Argon is used and Why O2 Detection is Required

    Thanks to new technologies, the 3D printers that have been used to create plastic three-dimensional objects can now print metal. Titanium 3D printing is possible thanks to a technique called DMLS, or Direct Metal Laser Sintering. While the potential to use titanium 3D printing is groundbreaking for many industries, the new advances could pose a health hazard if volatile gases used in the printing ...

  • Advancing Autonomous Underwater Vehicle Technology

    Autonomous underwater vehicles (AUVs) are a mainstay of the subsea survey industry. With unparalleled speed and accuracy in deep water, they have long been the obvious choice for surveys in inhospitable, deep environments. In light of the current downturn in the oil and gas market and the increasing visibility of autonomous vehicles, such as self-driving cars, AUV technology is poised to break ...

  • Underground, underwater, under stress: Town of Longboat Key puts SmartBall tool to unusual pipeline condition test

    When much of your critical sewer pipeline lies buried under a bay of shimmering ocean water, the challenges required to assess its condition may seem daunting. That task faced the Town of Longboat Key, an affluent retirement community located on the barrier island of the same name off the west coast of Florida. Sensitive to environmental, health and safety issues, ...


    By Pure Technologies

  • Analox case study: Monitoring oxygen at Cranfield airfield

    Introduction For personnel safety, monitoring of oxygen levels was required as part of an experimental field campaign based at Cranfield airfield. This experiment was undertaken by researchers in the atmospheric physics group at Imperial College London. The researchers are interested in measuring Far-infrared radiance fields in the atmosphere ...


    By Analox Sensor Technology

  • Changes to guidelines for oxygen monitoring in Italy

    New guidelines for the storage of nitrogen have been established in Italy which highlight changes to oxygen monitoring procedures. These guidelines are approved by the Italian National Transplant Centre, which is a technical ...


    By Analox Sensor Technology

  • Case study - G200 detects N20 leak in sedation equipment at dental surgery

    About the customer Dental practice, Dover, England Challenge the customer faced A dental engineer was sent to investigate N2O problems at the dental surgery after complaints from staff about the effects of the gas. Previous passive monitoring in the surgery had indicated a time weighted average (TWA) of N2O at 90ppm, and a suspected leak in a faulty ...


    By Geotech

  • OEM solutions help to popularize TDLS

    The latest case study published in AWE Magazine (March 2016 Edition) focuses on trends in gas detection solutions based on Tunable Diode Laser Spectroscopy (TDLS). OEM solutions based on TDLS are offered at low costs for high volume applications, and are customized to meet specific application demands. Read and download the complete case study ...


    By Axetris Ag

  • Gas Detection and Monitoring Systems

    In greenhouse applications, the accurate measurement of a number of environmental parameters such as carbon dioxide concentration, temperature, light intensity, water, humidity, pH and nutrient levels using sophisticated sensors is used to create a controlled environment for optimising plant growth rates while minimising energy usage. Carbon dioxide concentration is also one of the best ...


    By Edinburgh Instruments Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you