Only show results available in Connecticut? Ok

Humidity Monitoring services for Monitoring and Testing

  • Premium

    Dryer Rebuilds Services

    Durr MEGTEC, LLC (Dürr MEGTEC) can identify drying process deficiencies, evaluate and model performance improvements that will save energy and improve dryer efficiency.

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Dryer Services

    Dryer: After sales, spare & wear parts, repairs, etc. Your full-service provider: Whether you need spare parts, rentals, local service, repairs, upgrades, or modernization of your drying system, Andritz Separation is your full-service provider.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.

  • Premium

    Original Aerzen Special Oil

    Oil is not always ”Oil“! With decades of experience we know that 72% of all bearing problems are directly related to improper lubrication either due to contaminated oil, rapid ageing, or unsuitable quality for use in high speed machines. Be pro-active, ensure you use a lubricant that is designed for the high mechanical loading, varying ...

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from Original Aerzen Parts Service line

  • Premium

    Application Development Services

    Comprehensive system level integration of thin-film sensors. Our qualified technical team offers consulting, development, and production assistance – we employ simplified embedded front end solutions (electronic and software based), modules, and software algorithms, to support a fast design-in-process for the development of your application ...

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Rotor Performance Check Services

    Rotor performance check ensures optimal operation. The heart of a Munters desiccant dehumidifier is the desiccant wheel (rotor). A Performance Check will monitor variations and irregularities in rotor performance/capacity, enabling corrective actions to be taken.

    By Munters based in Amesbury, MASSACHUSETTS (USA).

  • Premium

    Lufft - Calibration Service

    We offer an Instrument Calibration service for almost all models and sensors of environmental measurement equipment for detection of temperature, relative humidity, air pressure and flow. Our team of qualified technicians working in our in-house laboratory ensure that your instruments are performing as they should be and ...

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Humidity Calibration Services

    Humidity Calibration laboratory houses three controlled humidity chambers covering a temperature range of 0°C to 60°C with a unique facility for controlling probe stem conduction balancing. Automated humidity calibrations can be undertaken on instruments with communication protocols.

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services - Traceable and UKAS Accredited Service line

  • Premium

    Medical Calibration Services

    A team of experienced calibration and test engineers with a vast knowledge of laboratory electronic and biomedical equipment compliments the extensive hi-tech laboratories at Young Calibration. The calibration laboratory utilises the latest technological and methodical procedures covering an extensive range of EBME calibration services, available ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services - Traceable and UKAS Accredited Service line

  • Premium

    On-Site Calibration Services

    UKAS Accredited On Site Calibration Services Young Calibration extends its' calibration capabilities by providing a range of traceable and UKAS on-site calibration services throughout the UK, Europe and USA. Realising the commercial and cost benefits to our customers, the on-site calibration sevices cover the major site requirements for ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services - Traceable and UKAS Accredited Service line

  • Premium

    Mold, Mildew & Lead Abatement Services

    American Pollution Control, Corp is a leading service provider in remediation of mold, mildew, bacteria, fungus, and other microbial organisms. Mold can cause allergen, irritant, inflammatory, and even toxic health effects. Water damage due to leaks, flooding, and other uncontrolled environments is the main cause of serious microbial contamination ...

  • Premium

    Urban Environment Services

    With climate change and rapid urbanisation, the influence of the built environment on local temperature and humidity levels is of increasing interest. Policy makers and planners must consider mitigation strategies for urban heat islands that develop during the summer months and make life uncomfortable for residents of cities worldwide.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM. from Environmental Consultancy Service line

  • DELTA OHM - ACCREDITED CALIBRATION ACCREDIA - ilac-MRA

    Delta Ohm production is entirely carried out at our site in Italy where operate also our metrological laboratories (Ilac-MRA Accredia) accredited for: Temperature, Acoustics, Photometry-Radiometry, Pressure, Relative Humidity,Air Speed.

    By Delta OHM - member of the GHM GROUP based in Caselle di Selvazzano, ITALY.

  • Environmental Testing Services

    Complementing our electrical test capabilities are a suite of dynamic and climatic test services including: vibration, mechanical shock, temp/humidity, thermal shock, altitude, salt atmosphere and combined environment testing. In addition, we offer compliance testing for DOT & NEMA enclosures and 400Hz aircraft or shipboard connectors and ...

    By Precision Test Solutions Ltd. based in Orlando, NORTH AMERICA.

  • Military Testing Services

    ATS takes pride in its commitment to military testing which has become a viable segment within our scope of capabilities. We offer a wide range of testing within one facility and strive to maintain our “one-stop-shop” reputation. Whether it is electrical testing of flight instrumentation or thermal cycling of advanced combat helmets, ...

    By Applied Technical Services Inc (ATS) based in Marietta, GEORGIA (US) (USA).

  • Calibration Services

    We can calibrate any make and type of test chamber on an ad-hoc basis or as part of an annual contract; Onsite calibration of Temperature and Humidity to National Standards. Onsite calibration of Temperature, Humidity, Pressure and Acceleration with UKAS accreditation.

    By Proactive Test Solutions Ltd based in Tring, UNITED KINGDOM.

  • Technical Consultation Services

    The solar pumping system is composed of solar pumping inverter, 3 phase AC pump, and solar array. The solar array is composed of many solar cells panels in series and in parallel, and absorbs irradiation from Sunlight, and converts into electrical energy (DC). Inverter controls and regulates pumping operation system and converts DC voltage from PV ...

    By Shenzhen Solartech Renwable Energy Co.,Ltd based in Shenzhen, CHINA.

  • Climate Stations and Management Solutions

    FlowWorks provides individuals with responsibility for climate stations with the tools to manage and analyze the numerous measurements including temperature, relative humidity, wind speed/direction, solar radiation, rainfall and snow totals that a typical climate station produces.

    By FlowWorks Inc. based in Everett, WASHINGTON (USA).

  • Medical

    This solution allows instant analysis of breath and headspace samples. Multiple chemically diverse compounds can be targeted and profiled in a single scan. Compounds in headspace can be quantified down to part per trillion by volume (pptv) levels. Compounds in breath can be quantified down to part per billion by volume (ppbv) levels.

    By Syft Technologies Ltd based in Christchurch, NEW ZEALAND.

  • Mold Remediation Services

    Mold can be a sign of too much moisture or dampness in your building.  We help you focus not only on the symptom (mold) but also on restoring your building to a dry condition. We can provide you with sound advice and practical solutions to help protect your property, lower your liability and perform due diligence. Our mold investigation and ...

    By First Environment, Inc. based in Boonton, NEW JERSEY (USA).

  • Temperature & Humidity Mapping Services

    The MHRA and FDA will expect that product and sample storage areas meet the required storage conditions as specified.  To confirm that temperature and humidity consistently meet these requirements, common industry practice is to perform a mapping validation.  This is very often carried out as part of the IQ and OQ for a new piece of ...

    By Validair Group based in Wrotham, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you