Industrial Gas Detection Articles

  • Is it really possible to improve superlatives? - Absolutely, with positive displacement blowers from AERZEN! The new generation Delta Blower G5plus is on the market!

    AERZEN set standards with the Delta Blower positive displacement blowers and raised the bar ever higher for performance, economic efficiency and environmental protection. To expand upon the success of the blower series, an exciting new design sets energy saving records. The innovative assembly concept combines proven features and newly-gained advantages. Delta Blower G5plus achieves up to 5% more ...

  • Case study - Monitoring the oxygen content in bio-methane-to-grid supply

    Since 1984, Orbital has provided advanced technology solutions for the natural gas industry. Orbital’s customers, including the National Grid and the UK's gas distribution networks, rely on its crucial engineering support and specialised knowledge. Its value-added services and innovative products reduce the time it takes to identify, design and begin cost-effective delivery of new ...


    By Systech Instruments Ltd

  • BRAG Biofuels Industry Outlook for 2017

    The biofuels industry is likely to face increasingly challenging times during the tenures of the new 115 th Congress -- which began on January 3 -- and the Trump Administration, scheduled to begin this Friday, January 20. Throughout his campaign for President, Trump repeatedly pledged his support for biofuels and the federal Renewable Fuel Standard (RFS). Indeed, it is this ...


    By Bergeson & Campbell, P.C.

  • Case Study - Siemens Industrial Turbomachinery AB

    Problem Two large gas turbines (approximately 25m x 12m x 10m) were installed in an industrial area nearby an office building. The gas turbines generate a tonal noise component at around 2700Hz caused by the inlet channel blades pass frequency. This tone imposes a more stringent noise requirement on the supplier, forcing noise reducing actions being made on the turbine. ...


    By Norsonic AS

  • Neon Gas and Where it is Used - PureAire Oxygen Deficiency Monitors for Safety and Why a Monitor May be Required?

    Neon gas has a range of uses in industry, including in the popular business signs advertising stores as open. Explore some of the less well-known ways to use neon and learn how use of the gas may require installation of an oxygen deficiency monitor to protect worker safety.   Uses for Neon Gas Neon gas can be filtered from helium using ...

  • Key Civil Construction Considerations for Oil and Gas Facilities

    Oil and gas facilities play a crucial role in our nation’s economy, provide fuel and electrical power, and create the ingredients for countless petroleum-based products. With such a vital role to play, it is essential that oil and gas facilities operate at maximum productivity and safety levels. While high quality maintenance, fabrication, and industrial services are all crucial for oil and ...


    By STI Group, Inc.

  • Tunnel Freezing and Flash Freezing Food with Nitrogen: Oxygen Monitors and Why They May Required

    New developments in cryogenic freezing are transforming the frozen food industry by making it easier to freeze all sorts of items quickly while retaining the highest nutritional value. Cryogenic and tunnel freezers are easy to use, yet they pose a hidden health risk. Learn why you may need an O2 monitor if your frozen food manufacturing facility relies on cryogenic freezers. How Cryogenic ...

  • Xylem unveils fifth generation HYDROVAR

    Highly efficient variable speed drive reduces energy consumption Xylem, a global water technology leader, has released the fifth generation HYDROVAR, an intelligent pump controller that accurately adapts to system demands, helping end users realize cost and energy savings while achieving optimum system performance. The new drive can reduce energy consumption of a pump by as much as 70 ...

  • Digital Technology to Transform Oil, Gas Hiring Practices

    The oil and gas industry’s effort to adopt digital technology not only will impact its daily operations, but its hiring needs as well. The oil and gas industry must pursue digital technology for two reasons: an aging workforce and increased focus on safety, said Mike Weast, IT regional vice president with professional staffing firm Addison Group, in a statement to Rigzone. As the majority ...

  • Learining how to Choose Materials for Gas Valves

    The materials and the quality of gas valves are so important that their disqualification will lead to leakage in-or-outside the body of the valve. If the strength, rigidity and overall performance of the components of the valve body cannot meet the requirements or even break, it will result in the spillage of gas and explosion. Therefore, material and quality are the most critical part during the ...

  • Case Study: Replacing Natural Gas For Industry

    Renewable Energy Systems Offset Fossil Fuels with Sustainable Fuel Supply PHG Energy’s patented downdraft gasification systems were first deployed for for Boral Brick Manufacturing at facilities in Alabama, Georgia and Tennessee. The technology was used to offset natural gas costs, which were then consistently topping $10 per decatherm. Twelve of the 8-ton/day gasifiers were ...


    By PHG Energy, LLC

  • What are the root causes of wear in industrial machinery?

    Over the years we’ve published a wide range of material designed to help you protect your assets and prevent machine failure, through implementing the right maintenance programme and taking appropriate action to fix issues before they manifest into larger and often more complex problems. However, ...


    By Hansford Sensors

  • Use of Oxygen Monitors for Nitrogen, Argon, or Cryogenics and Where They Are installed

    An oxygen deficiency monitor or O2 monitor is found in many settings where colorless, odorless gases -- including nitrogen, argon, CO2, and cryogenic gases -- are used. Always monitoring, the oxygen detector can tell when gas levels rise above those deemed safe, and let off a timely alarm. Learn which settings commonly use ...

  • PeCOD – Petrochemical Industry - Case Study

    Optimizing process efficiency for petrochemical wastewater monitoring is a key step in achieving sustainable energy. Care must be taken to properly monitor and treat wastewater generated from petroleum refineries to ensure contaminants are not released into the surrounding environment. Fast, safe, and reliable detection technology is therefore highly sought after and enables plant operators to ...


    By MANTECH

  • PureAire Oxygen Analyzers & Oxygen Monitors for Nitrogen Generators

    Nitrogen has many uses in industrial applications where oxidation would be undesirable. From carbonizing beer to preserving food, reducing fire danger, and cleaning equipment, nitrogen is a safe, inexpensive gas. For companies that need a steady supply of nitrogen gas, nitrogen generators work well. Learn about the uses of nitrogen generators and why you should use oxygen monitors in ...

  • Good Prospect in China Seamless Steel Pipe Industry

    Seamless steel pipe industry maintains a strong development momentum, and it is an important material in the national economic construction. Seamless steel pipe is a kind of economical steel, which is widely used in petroleum, electric power, chemical, coal, machinery, military, aerospace and other industries, countries around the world, especially industrial developed countries have attached ...


    By Derbo Steel Pipe Co., Ltd.

  • Interview: CNPC on China’s gas developments & environmental policies

    In this interview, conducted at Gastech, we had the pleasure of interviewing Shan Weiguo, Head of Gas Market Research at CNPC. We discussed China’s recent gas developments and its policies on lower emissions, energy security and the future of the country’s energy ...


    By dmg :: events

  • Nitrogen and Nitrous Oxide – the differences you need to know

    We’ve previously posted blogs about the confusion between carbon dioxide (CO2) and carbon monoxide (CO) as these gases are regularly mixed up. However, ...


    By Analox Sensor Technology

  • PSM: Just another Government Regulation, or Industry Best Practice?

    Process Safety Management (PSM) is addressed by OSHA in their standard for highly hazardous chemicals (29 CFR 1910.119). If the standard applies to your company, you likely already know a fair bit about the 14 elements of PSM and how they work together to manage hazards and minimize risk. However, increasingly companies are turning to PSM as a best practice, regardless of whether they are engaged ...


    By Intelex Technologies Inc.

  • Gas Detection and Monitoring Systems

    In greenhouse applications, the accurate measurement of a number of environmental parameters such as carbon dioxide concentration, temperature, light intensity, water, humidity, pH and nutrient levels using sophisticated sensors is used to create a controlled environment for optimising plant growth rates while minimising energy usage. Carbon dioxide concentration is also one of the best ...


    By Edinburgh Instruments Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you