Laboratory Air News

  • EMLab P&K Irvine Lab Expands Services, Providing Accredited Lead Testing

    EMLab P&K, a TestAmerica company and the leading commercial indoor air quality (IAQ) laboratory in North America, announces the expansion of services in its lab in Irvine, CA for Lead testing, including wipe, paint chip and bulk Lead samples, using flame atomic absorption spectrometry (Flame AA) Lead analysis. EMLab P&K’s lead analysis service is available to clients across the ...


    By EMLab P&K

  • Berkeley Lab Helps California Get to Zero Net Energy Homes

    California has established ambitious goals to reduce energy consumption in buildings, including a policy goal for all new residential buildings to be zero net energy (ZNE) by 2020. Now the Department of Energy's Lawrence Berkeley National Laboratory (Berkeley Lab) has launched two projects to help the state meet its ZNE building goals. One project will provide detailed cost and performance ...


    By Smart Grid Observer

  • Fuel savings and improved air quality highlight Duke Energy`s truck-stop effort in N.C.

    More than 25,000 gallons of truck fuel is projected to be saved annually as part of a $300,000 Duke Energy project to fund electrification at a North Carolina truck stop. Big Boy's Truck Stop, in the Johnston County town of Kenly, will soon have 24 truck electrification stations where drivers can pay to ...


    By Duke Energy

  • EMLab P&K Chicago Helps Mold Testing Specialists in Illinois Through Patent-Pending Lab Report

    EMLab P&K, a TestAmerica company and the leading commercial indoor air quality (IAQ) laboratory in North America, has helped mold testing clients in the state of Illinois for more than two years through MoldRANGE Local Climate report. The enhanced versions of the patent-pending reports are available for EMLab P&K’s clients who perform mold sampling in the state of Illinois. ...


    By EMLab P&K

  • Virginia Mold Testing Lab Celebrates 13 Years Serving DC, Maryland & Virginia

    EMLab P&K, a TestAmerica company and the leading commercial indoor air quality (IAQ) laboratory in North America, marks thirteen years of serving communities throughout Virginia and the surrounding states with extensive mold analysis. The Fairfax lab has also recently expanded its staff to accommodate the growing analytical capacity, in order to further support Virginia’s mold testing ...


    By EMLab P&K

  • Introducing two new products to the Titan range

    Introducing the MaxiFlow 30-C Nitrogen Gas Generator: the latest offering in its high-spec equipment portfolio.  MaxiFlow 30-C is a medium flow, medium purity Nitrogen generating system, with an integrated air compressor, making it an alll-in-one 'plug & play' option. Perfect for areas where space is limited, but reliability is crucial. ...


    By Titan N2 Ltd

  • Vision Air 2.0 – New Vis-NIR spectroscopy software

    Metrohm is pleased to launch Vision Air 2.0, a universal software solution for Vis-NIR spectroscopy.  Vision Air caters to the needs of routine users and laboratory managers alike with specific interfaces, simplifying routine measurement, method development, and both data ...


    By Metrohm AG

  • EMLab P&K Helps Florida Mold Testing Companies With Patent-Pending Mold Lab Reports

    EMLab P&K, a TestAmerica company and the leading commercial indoor air quality (IAQ) laboratory in North America, reached a milestone producing more than 1,000 MoldRANGE™ Local Climate reports for communities throughout Florida. Mold testing specialists in Florida and across the United States gain enhanced insights for their mold inspections through the patent-pending ...


    By EMLab P&K

  • U.S. Air Force announces $55 million for Advanced Drop-In Biofuels Production

    On January 19, 2017, the U.S. Air Force Research Laboratory issued a $55 million funding opportunity announcement (FOA) to establish additional Integrated Biofuel Production Enterprise (IBPE) capabilities to increase the domestic production capacity of advanced biofuels.  The U.S. Air Force anticipates granting one award of up ...


    By Bergeson & Campbell, P.C.

  • Camfil APC expands testing laboratory

    Camfil Air Pollution Control (APC), a manufacturer of dust, mist and fume collection equipment, has doubled the size of its testing laboratory to include a climate-controlled facility with a new full-size dust collection test rig. The new equipment is dedicated to testing in accordance with ANSI/ASHRAE Standard 199-2016, Method of Testing the Performance of Industrial Pulse Cleaned Dust ...


    By Camfil Ltd

  • Aerojet Rocketdyne to Mature Rotating Detonation Engine Technology in Cooperation with Department of Energy

    Aerojet Rocketdyne, a subsidiary of Aerojet Rocketdyne Holdings, Inc. (NYSE:AJRD), has signed a cooperative agreement with the National Energy Technology Laboratory (NETL) of the U.S. Department of Energy to develop air-breathing rotating detonation engine (RDE) technology that could enable the combined cycle efficiency of natural gas-fueled power plants to exceed 65 percent - a significant ...


    By Aerojet Rocketdyne, Inc.

  • Modelling partly to blame for air quality failures

    On 2nd November 2016 the High Court ruled in a case brought by ClientEarth, that the UK Government’s plans to tackle air pollution are illegal. The judgement said: “the Secretary of State (for the Environment, Food and Rural Affairs) must aim to achieve compliance (with the Air Quality Directive) by the soonest date possible, that she must choose a route to that objective which ...


    By Air Monitors Ltd.

  • Hybrid Power Plant Combines 3 Clean Energy Sources in One

    October 24, 2016 -- Enel Green Power North America’s Stillwater plant, outside the desert town of Fallon, Nevada, came online in 2009 as a conventional geothermal plant and later added solar panels. After adding concentrating solar power in 2015, it became the ...


    By Smart Grid Observer

  • Solar+Storage Microgrid at U.S. Air Force Forward Operating Base of the Future

    September 20, 2016 -- Ideal Power Inc., a developer of innovative power conversion technologies, and EnerDel, a lithium-ion battery manufacturer and energy system integrator, have teamed up to create a mobile hybrid solar plus battery energy storage system for the United States Air ...


    By Smart Grid Observer

  • Optimising laboratory environment for successful IVF outcomes with Geotech’s G100

    The accuracy of incubator gases within an IVF laboratory plays a major role in success of IVF programs in any fertility clinic today.  Given the crucial role that the incubator plays in the IVF process, the conditions within the incubator in an IVF laboratory must be optimal at all times to increase the likelihood of a successful assisted reproductive treatment. Geotech’s G100 ...


    By Geotech

  • First Evapcold Units Successfully Installed in Utah

    Since its founding in 1901, The Western Gateway Storage Company in Ogden, Utah, has provided innovative cold storage solutions to Utah and the surrounding states while growing and expanding as a company, priding themselves on their modern facilities and commitment to customer satisfaction. Western Gateway’s commitment to keep their customers’ inventories, safe, clean, and cold, while ...


    By Evapco Inc.

  • Parker Releases New Air Driven Liquid Pump

    Parker Autoclave Engineers, part of Parker Hannifin – the global leader in motion and control technologies, has released an innovative new air driven liquid pump, the AHL118. A high volume, double-ended, double acting high pressure pump, the AHL118 is designed for use in oil and gas, chemical, industrial and research applications. The pump operates to a ...


    By Parker Hannifin Corp

  • Creating a Weighing Oasis: New White Paper Helps Solve the Problems of Accuracy and Speed

    Weighing accuracy is critical, but so is productivity. Help promote them both by downloading the free white paper “Weighing Under Harsh Conditions” from METTLER TOLEDO. Weighing is a common lab activity. Accuracy is a must. However, factors such as temperature variations and air drafts can affect balance accuracy, causing issues such as waste and rework. In highly regulated ...


    By Mettler - Toledo Int. Inc

  • NREL Scientists and Engineers Recognized for Top Innovations as Lab Celebrates another Record-Breaking Year of Inventions

    Today during its annual Innovation and Technology Transfer Awards ceremony, the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) recognized researchers and staff for 169 new innovations, a record-breaking number of scientific and engineering inventions in fiscal year 2015 (FY15). This is a 33 percent increase from last year. The annual event acknowledges ...

  • EMLab P&K Helps Mold Testing Specialists in New Jersey and Pennsylvania

    EMLab P&K, a TestAmerica company and the leading commercial indoor air quality (IAQ) laboratory in North America, helps mold testing clients in New Jersey and Pennsylvania through MoldRANGE Local Climate report. The enhanced versions of the patent-pending reports are now available for EMLab P&K’s clients who perform mold sampling in New Jersey and ...


    By EMLab P&K

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you