Laboratory Instruments News

  • Anaerobic Digestion of Slaughterhouse Wastes after Thermal Treatment using ADM1

    The process known as rendering, is a mandatory process that has been implemented by the European Legislation, and involves the thermal treatment of category 2 slaughterhouse by-products at 140°C, 4-5 bar for 20 min for their hygienization prior to disposal. ...


    By Edinburgh Sensors Ltd

  • Axetris Micro-Lenses and Lens Arrays for High Speed TOSA/ROSAs & Silicon Photonics

    Axetris' manufacturing process based on lithography and etching achieves the high lens quality needed for coupling to single mode fibers or waveguides, as well as the precise lens placement required to match fiber-, waveguide- or photodiode arrays. The wafer-based manufacturing enables to scale to high volumes and low cost and therefore offers competitive alternatives to known solutions such as ...


    By Axetris Ag

  • RSB-01S product news

    We took a different approach to measure the three irradiance components (DNI, GHI, DHI). A spectroradiometer with rotating Shadow Band (RSB) is an attractive alternative to a conventional 3 component sun tracker system. Just one spectroradiometer used for all measurements lowers the costs associated with the instrumentation required. Accurate DNI measurements can be obtained from a MS-711 Global ...


    By EKO Instruments

  • Advanced Autosampler and Liquid Handling System Improves Lab Productivity

    Laboratories can now automate manual steps and achieve high sample throughput and high productivity with a new autosampler and liquid handling system intended for use in pharmaceutical, contract research, food safety, environmental, clinical research and forensic workflows.  The  ...

  • LazWel now come with two barcodes for even better traceability!

    If part of your job requires that you prepare samples, you have probably been confronted to the fact that liquid handling systems are all different from one another. They can work with one sample at a time, or sometimes 8, some have modules to incubate your samples and some don’t. But most of them have the ridiculously amazing advantage that is: Traceability. You can ...


    By Phytronix Technologies Inc.

  • Process Scale-Up from Demonstration Batch Filtration to Commercial Continuous Filtration

    INTRODUCTION: In the chemical process industry (CPI) as well as new technology arena (NTA), there are inherent risks and benefits to scaling up from the laboratory / bench top through pilot, demonstration and then finally commercial scale. This article will follow the process filtration approach developed for each technology stage gate starting from batch filtration in the lab to continuous ...


    By BHS-Sonthofen Inc.

  • Tune Your Industrial Evaporation!

    Tune Your Industrial Evaporation. Faster. Easier. Application specific. Achieve better results by optimizing your rotary evaporator For a successful fast and efficient evaporation and concentration, it is important to know the influencing process ...


    By BÜCHI Labortechnik AG

  • BUCHI launches first lab freeze dryer for continuous sublimation

    BÜCHI Labortechnik AG, market leader in laboratory evaporation, introduces the modular LyovaporTM platform for freeze drying. With Infinite-TechnologyTM, the LyovaporTM L-300 offers continuous sublimation for the first time.  Infinite-ControlTM allows entire process control of all relevant parameters, also via mobile ...


    By BÜCHI Labortechnik AG

  • BUCHI introduces the new Nano Spray Dryer B-90 HP

    The Nano Spray Dryer B-90 HP is an easy to handle, high performing product. The gentle process and innovative technology enable to produce submicron particles from small sample volumes. Several new functionalities allow maximum process control, easy handling and higher productivity. With the B-90 HP, several materials can be tested quickly. The new Nano Spray Dryer is ideal for various ...


    By BÜCHI Labortechnik AG

  • Analytik Jena Optimizes the Process for Ultra High Throughput Screening

    Analytik Jena has joined forces with Bruker Daltonics to accelerate lab processes: uHTS MALDI Sample Preparation in combination with label-free spectrometry guarantees reliable ultra high throughput screens in biopharmaceutical labs. The process will premiere at the ...


    By Analytik Jena AG

  • One million tests a week: Analytik Jena optimizes the process for ultra high throughput screening

    Analytik Jena has joined forces with Bruker Daltonics to accelerate lab processes: uHTS MALDI Sample Preparation in combination with label-free spectrometry guarantees reliable ultra high throughput screens in biopharmaceutical labs. The process will premiere at the SLAS 2017 International Conference and Exhibition in Washington D.C. from February 4-8, which focuses on innovative products and ...


    By Analytik Jena AG

  • WWEM 2016 visitors urged to plan ahead

    WWEM 2016 will open its doors on 2nd and 3rd November in Telford and with 8 Conferences, more than 80 Workshops and a sold out Exhibition; the organisers are urging visitors to plan their trip in advance. “Most importantly, visitors must register online as soon as possible,” says event manager David Hellyer. “Many of the conferences and workshops are running at the same time, so ...

  • Enormous numbers expected as Registration opens for WWEM 2016

    WWEM 2016, the international Water, Wastewater and Environmental Monitoring conference and exhibition will take place in Telford (UK) 2-3 November, and registration is now open at www.wwem.uk.com. This will be the seventh WWEM in a series that began in 2005, with each event larger and more popular than its predecessor. “WWEM 2016 ...

  • Kaori expand Patented Double Wall and Air Dryer Heat Exchanger Portfolio

    Responding to requests from OEMs to reducing size and cost, Kaori’s team release the new patented Brazed Plate Heat Exchanger for Double Wall D045 and Refrigerated Air Dryer A140. The two new heat exchangers extend the capabilities of Kaori’s line of Double Wall and Air Dryer Series to offer unique design and manufacturing process benefit manufactures of heating and cooling ...

  • BUCHI Rotavapor® R-300 receives several design awards

    BUCHI is proud to announce that the rotary evaporator Rotavapor® R-300 has been recognized with the German Design Awards 2016, the RedDot Award 21 and the iF International Forum Design Award. Furthermore, the User Interface I-300 and I-300 Pro for the R-300 received the iF Award in the category “communication”. According to the commitees, the awarded products set a new standard of ...


    By BÜCHI Labortechnik AG

  • SEAL Analytical announces EMEA Distributor of the year 2015

    OmniProcess (Sweden) has been awarded ‘EMEA Distributor of the Year 2015’ by laboratory instrumentation manufacturer SEAL Analytical.    Congratulating the OmniProcess team on their success, SEAL President Stuart Smith said: “There are a number of factors affecting the decision, including the volume of business won; the identification and development of new ...


    By SEAL Analytical, Inc.

  • Distek, Inc. Celebrates 40 Years in Business

    Distek, Inc., a leading manufacturer of pharmaceutical laboratory testing instruments, accessories and validation services, is proud to celebrate 40 years in business. Founded in 1976 by Mr. Gerald Brinker, Distek has grown to offer innovation and support to companies worldwide.  Like Disney, Apple, Google & Amazon, Distek, Inc. is a real life garage startup success story. ...


    By Distek, Inc.

  • Have you seen the new BUCHI Rotavapor® R-300?

    The world leader in rotary evaporation introduces a ground-breaking laboratory system with the launch of the Rotavapor® R-300. The innovative, modular platform with a plug & play concept enables seamless combinations of components to provide tailor-made solutions, from a basic rotary evaporator to a fully-automated system. A new level of unattended operation will be achieved with ...


    By BÜCHI Labortechnik AG

  • How Many Lamps Does an AAS Laboratory Need? Just a Single One — With contrAA

    This problem is familiar to every AAS user: For each element, an individual hollow-cathode lamp is needed. Multi-element analyses take an enormous amount of time and work. Flexibility, too, is significantly restricted — new elements require new lamps. With the High-Resolution Continuum Source (HR-CS) AAS technology used in the ...


    By Analytik Jena AG

  • The Essential Solution in Rotary Evaporation

    BÜCHI Labortechnik AG, the world leader in rotary evaporation, expands its laboratory applications product portfolio with the launch of the Rotavapor® R-100 Essential Solution. BUCHI presents an economical, complete system for fundamental laboratory applications in the usual high quality. “Dedicated discussions with our customers globally proved the desire for an economical ...


    By BÜCHI Labortechnik AG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you