Sample Dilution Articles

  • Software and hardware solutions

    Sierra-CP can meet a wide range of testing requirements with its highly flexible, customized software and hardware solutions Thirty years of successfully meeting tough customer challenges has taught Sierra-CP that the concept of ‘one solution fits all’ just doesn’t work in the automotive testing industry. The company works hard to create an open atmosphere for client ...


    By Sierra Instruments, Inc.

  • Particulate partial flow sampling

    The sampling method of the Sierra Instruments Model BG-3 sets the standard for engine particulate emissions measurement protocols of the future sierra instruments In a study at West Virginia University, evidence showed that the Sierra Model BG-3 partial-flow system is equivalent to full-flow CVS. At the August 2008 DEER conference, the university’s Dr Ben Shade presented a paper evaluating ...


    By Sierra Instruments, Inc.

  • Particulate Matter Testing - BG3 Partial Flow Dilution Emissions Sampling - Case Study

    Today, the BG3 Elite Series for partial flow dilution (PFD) is the standard used to test and measure particulates by such industry giants as Caterpillar, John Deere, Perkins, JCB, and even the US EPA, and has found a global installed base of hundreds of units.  On January 7, 2011, ...


    By Sierra Instruments, Inc.

  • WEFTEC – Booth 1820

    Join Joe and Quincy at WEFTEC, booth 1820, for a demonstration of our Jerome® hydrogen sulfide analyzers and see the difference that an accurate, user-friendly, reliable and durable H2S analyzer can make. ...


    By AMETEK Brookfield

  • Groundbreaking climate change research at Jungfraujoch Research Station - Case study

    Axetris MFCs used for CO2 isotope tracking Swiss Federal Laboratories for Materials Science and Technology (Empa) is using Axetris mass flow controllers (MFCs) in its research laboratory at the Jungfraujoch High Altitude Research Station, located at the "Top of Europe." Axetris MFCs were chosen to fulfill the strict demands of repeatability and stability for enabling high-performance ...


    By Axetris AG

  • Analyze FAME in Diesel using FTIR | Spectroscopy Solutions

    Biodiesel is a promising alternative to diesel produced from fossil fuels, however barriers still exist towards the creation of high efficiency biodiesel. The fatty acid methyl ester (FAME) content of biodiesels significantly affects their quality and performance. Fourier transform infrared (FTIR) spectroscopy using the Pearl™ liquid transmission unit from Specac ...


    By Specac Limited

  • Monitoring of Hydrogen Sulfide in Industrial Processes

    Hydrogen sulfide, H2S, is a very poisonous, corrosive, and flammable gas. As such, it needs to be carefully monitored and controlled in industrial processes where it is generated or used. At relatively low concentrations, it has an odour of rotten eggs which effectively works as a warning, but at higher concentrations where it becomes acutely toxic and even lethal, it can no longer be smelled ...


    By Opsis AB

  • WEFTEC – Booth 5338

    Join Joe at WEFTEC, booth 5338 for a demonstration of our Jerome® hydrogen sulfide analyzers and see the difference that an accurate, user friendly, reliable and durable H2S analyzer can make. ...


    By AMETEK Brookfield

  • Food & Beverage Industry: Soft Drink - Case Study

    The peCOD (photoelectric Chemical Oxygen Demand) method for COD analysis is well suited to the soft drink industry as it provides plant operators with quick and reliable COD results important for process monitoring and control. Continuous COD monitoring of wastewater can protect production plants by ensuring COD discharge levels meet the acceptable limits, and by detecting product leakage. It can ...


    By MANTECH Inc.

  • ODAP 2018 – Booth 23

    Join Jeff at ODAP, booth 23 for a demonstration of our Jerome® hydrogen sulfide analyzers and see the difference that an accurate, user friendly, reliable and durable H2S analyzer can make. ...


    By AMETEK Brookfield

  • How to Monitor Mercury Emissions

    In recent years, mercury levels in the environment and in the food chain have risen substantially mainly due to human activities. As a long-range pollutant it can affect areas located thousands of kilometers away from its original source of emission. It’s no wonder then that the regulatory pressure to monitor mercury emissions grows stronger.  Before diving ...


    By Gasmet Technologies Oy

  • How Does a Gas Analyser Work?

    Whatever you want to detect, you need to identify a property of the object that is easy-enough to measure. When it comes to monitoring and analysis of gaseous species (atoms or more commonly molecules), it turns out that it often is possible to utilize the optical properties of the gas. You need a light source, a light detector, and a characteristic behaviour of the gaseous species in question ...


    By Opsis AB

  • Seminar on Capillary Electrophoresis for the determination of inorganic cations and anions in Thailand demonstrates the benefits of CE method

    In the beginning of October, Lumex Instruments held the hands-on training on Capillary Electrophoresis (CE) in Thailand for our users and potential clients. This event was organized together with our distributor CE Combination and involved presentation of CE method and demonstration of Lumex Instruments ...


    By Lumex Instruments Group

  • ASTM Standard Test Method for Photoelectrochemical Oxygen Demand of Freshwater Sources for Drinking Water Treatment Plants and Treated Drinking Water

    Significance and Use 5.1 This test method describes a rapid method to determine the maximum quantity of oxygen that may be consumed by impurities in water. As outlined in Test Methods D1252, chemical oxygen demand is typically used to monitor and control oxygen-consuming pollutants, both organic and inorganic, in domestic and industrial wastewaters. This ...


    By MANTECH Inc.

  • Best Practices: Sample Planning for Quantitative NIR Methods

    The focus of this post is NIR project and sample planning, a critical step in the NIR method development process that often gets rushed through in the eagerness to have our NIR instruments pump out measurement results.  Putting some extra effort in sample planning could pay off big dividends in terms of two things I suspect are really important to you – accuracy and robustness. So, ...


    By BÜCHI Labortechnik AG

  • What is XRF? | Spectroscopy Guides

    X-ray Fluorescence (XRF) is a technique widely used in elemental analysis. It is based on the principle that an atom's inner electrons, when bombarded with high energy radiation such as X-rays, are ejected. The atom relaxes by emitting photons of characteristic wavelengths, which are used to identify the element.  If diagrams do not animate, try ...


    By Specac Limited

  • XRF pellet preparation for mined mineral analysis

    Sample heterogeneity affects the accuracy and repeatability of many X-Ray Fluorescence (XRF) measurements. Consistent sample preparation is required for measurements that are fully representative of the whole sample composition. The mineral mining industry has a need for several different measurements at different stages of the recovery process, and the sample preparation required will vary. ...


    By Specac Limited

  • Overview of Rotating Disc Electrode (RDE) Optical Emission Spectroscopy for In-Service Oil Analysis

    Introduction The basis of modern oil analysis is the use of optical emission spectroscopy (OES) to measure the ppm (parts per million) levels of wear metals, contaminants and additives in oil samples. Whatever else an oil lab may measure, a multi-elemental analysis is the core of in-service oil analysis. This paper gives an overview of Rotating Disc Electrode Elemental Spectroscopy and its ...


    By Spectro Scientific

  • Analysis of Trace Elements in Water by EPA Method 200.8 using ICP Mass Spectrometry

    This application note describes the methodology and use of the Shimadzu ICPMS-2030 ICP mass spectrometer for the analysis of trace elements in drinking and fresh waters following the EPA 200.8 method. This method is also used for analysis of wastewater. In-line addition of internal standards to calibration and unknown samples was accomplished using the Shimadzu Internal Standard Addition ...

  • The productive environmental laboratory: BSK Labs boosts efficiency with Metrohm IC

    BSK Labs runs a number of environmental laboratories and service centers along the west coast of the US. A total of 70 employees – including microbiologists, chemists, lab technicians, and support staff – make sure that the 200 to 350 samples that come in every week are analyzed. BSK Labs specializes in potable water chemistry, ground water monitoring, storm water runoff, solid waste ...


    By Metrohm AG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you