LAP srl
LAP - Model OP3 2W Series -3" 2 Wire Oil Filled Submersible Motor
FromLAP srl
Motor range versions: Single Phase: 0.37kW (0.5hp) to 0.75kW (1hp), 220-230V / 50Hz (or 60Hz). Other voltage and frequencies available upon request.
Most popular related searches
oil filled submersible motor
thrust ball bearing
water cooling
submersible motor
cooling water flow
silicon carbide ceramic
cooling water
- Rewindable.
- Built in capacitor.
- Built in thermal overload.
- Upper bracket: Nickel plated cast iron. SS 316 available.
- Motor case: SS 304.
- Motor shaft: SS 304.
- Shaft extention and coupling: NEMA Standard.
- High quality radial and thrust ball bearings.
- Winding: enameled copper - Class F insulation.
- Degree of protection IP68/Class B insulation.
- Max temp. 35° with water cooling flow min. 0.08 m/s.
- Max depth immersion: 100 m.
- Nos. of start per hour: max 30 at regular intervals.
- Over-dimensioned sand slinger.
- Mechanical seal: graphite/ceramic. SiC/SiC or SiC/AI mechanical seal available as option.
- Coolant: dielectric non toxic high quality lubricant.
- Motor cable length: 1,75 m (2 wires plus ground).
- Voltage variation: +/-10%.
- Suitable for horizontal operation.