Turtle Tough - 5M Drop Tube for In-tank Submersion

• Designed for submersion depths greater than 3 metres 
• An excellent alternative to immersion rods
• Improves the ease of retrieving sensors for cleaning and calibration 
• Improves operator safety 
• Acts as a guide tube holding the sensor in the preferred measurement location
• Allows for much shorter cable runs on the sensor
• Ideal for tank mounting

Drop Tube for in-tank submersion

Turtle Tough`s Drop Tube is an excellent alternative to in-tank immersion rods for applications that require submersion depths greater than 3 metres. Turtle Tough Drop Tube allows a sensor to be “dropped” directly in a tank without attachments. Only sensors with back-end cable protection (CP option) should be used in this application to provide the required cable strength for retrieving the sensor from the tube. The guide tube holds the sensor in position at the desired depth (standard depth is 5m) and does not allow the sensor to drift aimlessly in the process at the risk of getting caught on agitators or internal tank components. This design saves lifting the immersion rod from the tank and allows shorter cable runs on the sensor. You can clean and calibrate by just pulling the sensor up from the tube. No winching of the immersion rod out of the tank is necessary, as the drop tube significantly improves the ease, safety and time spent on the cleaning and calibration of the sensor with the sensor at hand.

• Sensor name : Turtle Tough Drop Tube
• Part number  : TT-MISC-DTUBE-5M
• Body type : 316 Stainless Steel
• Dimensions : 65 mm OD with 62.6 mm ID pipe 5000 mm long and 65mm OD to 40 mm OD reducer at end
• Technical Drawing : Refer to the brochure 
• Recommended applications : In-tank submersion greater than 3 metres
• Sensor/Interface  : Turtle Tough sensors with back-end cable protection (CP) option.
• Warranty : 12 Month Conditional Warranty
• See turtletoughsensors.com/support/warranty-returns