Companies
Saltec International
Products
AeroWet - Novel Dry Feed Technology for ...

AeroWet - Novel Dry Feed Technology for Solid Grade Polymers

FromSaltec International

SHARE

Using a batching system, polymer is fed from the storage hopper by the screw feeder at a constant rate via the AeroWet™ module into a motive air stream provided by the blower. Air conveys powder to the JETWET® disperser where it is wetted out prior to entering the agitated mixing tank. After a predetermined quantity of polymer is delivered & the mixing tank is full, the solution is homogenized. After a predetermined aging time has lapsed, polymer solution is transferred as a batch by the transfer pump under the control of the storage tank level sensor. The cycle is then repeated.

Most popular related searches

polymer feed system

tank level monitoring

polymer preparation

polymer mixing tank

laboratory homogenizer

Solid grade polymer preparation for numerous industries and applications
From the smallest of usage up to systems producing >50 kg/hr of polymer
Suitable for retro-fitting to existing KICAB FAB units as an equipment upgrade
Starch preparation

AeroWet™ revolutionary design of sealed polymer feed system (Patent pending)
Full bore powder conveying with no venturi restriction
Fully automatic operation
Incorporating renowned Polywet® disperser
Modular design of feeder, mixing and storage vessels
Dedicated control panel to KICAB standard or to accommodate customer special requirements

Service required

3 phase/50 Hz power supply. Power rating will vary with unit size. Most voltages can be accommodated.
Retro-fit applications only – Single phase/ 50Hz RCD protected supply suitable for 300 Watt application. Specify preferred voltage of 110v or 240 v.
Water minimum 100lpm @ 1 bar – will vary with size (to 1000lpm) – contact KICAB for advice

Noise

75 dB(A) measured at 1m distance from stand alone unit.

Dimensions

1300 L x 650 W x 1350 H (Measured in mm)