Genesol - Model 36 -Alkaline Chelant Cleaner

• Genesol 36 should be used as a 1-2% solution at the highest pH recommended by the membrane manufacturer and should be alternately soaked and recycled through the membrane system for at least 3-4 hours. Working with enhanced temperature will also improve the cleaning performance.
• Cleaning solutions using Genesol 36 have a tendency to foam. After cleaning, the membrane system should be thoroughly flushed out, until the pH values of the feed and the discharge are the same and all residual traces of Genesol 36 have been removed.
• Genesol 36 can be diluted and is fully miscible with water in all proportions.

Health and Safety

Genesol 36 is an anionic surfactant based on sodium salt of an alkyl benzene sulphonic acid. It is compatible with carbon steel and commonly used materials of construction. A material safety data sheet is available on request.

Classification

• CHIP: Irritant
• UN: Non Hazardous

Typical properties

• Appearance: pale yellow liquid
• pH as supplied: 7 – 8
• Specific gravity: 1.01 - 1.03
• Freezing point: < - 5°C

Packaging

• Available in 25 Kg kegs and 250 Kg drums.
• The shelf life is two years under normal storage conditions.