Ankersmid - Model ASS Series - Stationary gas conditioning system
The stationary system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other solutions.
The heated sample line is to be mounted directly at the sample gas inlet connector made of stainless steel.
A ball-valve can be fitted to the inlet terminal of the portable system in order to calibrate analyser(s) with check gas.
The amount of flow is determined by a sample gas diaphragm pump. The sample gas pump AMP 11P is activated automatically by means of an excess temperature contact on the cooler. Optional flow meters with integrated needle valve are available. The flow meters are built-in as the electronic controller and are visible from outside when the carrying case is closed.
This unique microprocessor controlled Peltier cooler is a powerful designed dew point stabiliser. The dew point is set at 4°C but can be changed at any value between 1°C and 15°C. The gas cooler is equipped with an innovative heat exchanger system.
A preliminary fine filter (AUF) is installed at the inlet of the gas sampling pump and can be equipped with a variety range of filter elements in different materials and porosities. Any condensation is continually removed by a peristaltic pump type ASR25.
With the optional thermostatic paramagnetic O2-sensor the APS is a suitable and reliable instrument for monitoring oxygen concentrations in various gas analytical control applications including process gas-, emission monitoring gas-, inert gas-, flue gas-, fermentation processes-, ambient air- and laboratory process control measurements.
- The stationary gas conditioning system ASS has been designed so that detailed gas analyses can be carried out continuously.
- The entire gas conditioning system is mounted on a plate for an easy installation in cabinets, containers and any kind of walls.
- The device guarantees a safe operation with minimum maintenance.
- Low maintenance and self-monitoring
- Dew point +4 °C ± 0,1°C
- Ready for use < 15 min
- Compact design
- Optimum reliability
- Universally equipped
- Good chemical resistance